Hi everybody,
I have an issue in the last update of Xbian beta mounting my four HDD from a Sharkoon Quattro.
I always can mount only one from the docking station however I could not mount the rest at the same time I have to power off the previous HDD and the connect the other one.
In Xbian alpha 4 I was able to mount and unmount the four HDD at the same time.
Is it possible to fix the problem?
Thanks
Please read before you post - a link is in my signature.
Are you mounting these drives yourself? or letting Xbian mount them for you?
If the latter, can you check if dbus is running?
(25th Oct, 2013 04:56 AM)IriDium Wrote: [ -> ]Please read before you post - a link is in my signature.
Are you mounting these drives yourself? or letting Xbian mount them for you?
If the latter, can you check if dbus is running?
Sorry this is my RPI
Software
XBian version: Beta 1.1
XBMC version: 12.2
Overclock settings: No overclocking
Hardware
Power supply rating: 1A
RPi model (model A/B 256mb/512mb): model B 512mb
SD card size and make/type: 8gb Samsung
Network (wireless or LAN): LAN
Connected devices (TV, USB, network storage, etc.): TV and USB storage
I think it is not active. How can I activate it?
Go - > Programs -> Xbian-Config -> Services -> DBus -> Status <enter> <start>
or
ssh xbian-config -> services
or
ssh #sudo start dbus
I started dbus but anything has changed.
It is Xbian the one which mounted them.
Xbian will normally mount all USB drives. However if dbus is not running at start, then the drives will not be mounted.
Do a search on the forum about dbus, there is a fix for this problem, which should solve your problem
Dbus appears in xbian-config as Yes in autostart, I don not knoow if it is correct or not.
I will do the search for dbus.
Thank you very much
It may show autostart but does it show running?
If not, you have to manually start it, and then search for the fix.