Forum - xbian-config

hi, after update from xbian conf, i am not able to accesso in xbian config again....
how can i fix it?

can I come back without reflash the immage (because is it already configurated with my personal parametre)?

thanks

are you referring to xbian-config text console application, or xbian-config as program addon in XBMC ?

(7th Jan, 2014 12:44 PM)mk01 Wrote: [ -> ]are you referring to xbian-config text console application, or xbian-config as program addon in XBMC ?

In console...I had never tried addon...a

you mean it is not starting automatically as you log as user xbian?

type

Code:

sudo xbian-config

navigate to settings -> xbian-config -> autorun

No..no...I mean if I digit sudo xbian-config, it doesnt work...
Didn't find the command...
After the update from xbian-config I've rebooted then raspberry and the command doesn't work more....

Can you provide the output from the command dmesg also a screenshot of the output from sudo xbian-config.

(8th Jan, 2014 02:32 AM)IriDium Wrote: [ -> ]Can you provide the output from the command dmesg also a screenshot of the output from sudo xbian-config.

hi...here the output..>

Code:

xbian@xbian ~ $ dmesg

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.10.18+ (root@media) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #68 Sat Nov 16 00:50:06 CET 2013

[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[    0.000000] Machine: BCM2708

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 122880

[    0.000000] free_area_init_node: node 0, pgdat c04df014, node_mem_map c0534000

[    0.000000]   Normal zone: 960 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 122880 pages, LIFO batch:31

[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[    0.000000] pcpu-alloc: [0] 0 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0xdf6642ba smsc95xx.macaddr=B8:27:EB:66:42:BA sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lzo rootfstype=btrfs rootwait smsc95xx.turbo_mode=Y elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] allocated 983040 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 480MB = 480MB total

[    0.000000] Memory: 475012k/475012k available, 16508k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc048bf2c   (4624 kB)

[    0.000000]       .init : 0xc048c000 - 0xc04ae004   ( 137 kB)

[    0.000000]       .data : 0xc04b0000 - 0xc04dfb00   ( 191 kB)

[    0.000000]        .bss : 0xc04dfb00 - 0xc0533dd8   ( 337 kB)

[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.000000] NR_IRQS:330

[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms

[    0.000000] Switching to timer-based delay loop

[    0.000000] Console: colour dummy device 80x30

[    0.000000] console [tty1] enabled

[    0.000407] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)

[    0.000425] pid_max: default: 32768 minimum: 301

[    0.000676] Mount-cache hash table entries: 512

[    0.001333] Initializing cgroup subsys memory

[    0.001442] CPU: Testing write buffer coherency: ok

[    0.001783] Setting up static identity map for 0xc03fa090 - 0xc03fa0c8

[    0.002972] devtmpfs: initialized

[    0.014039] xor: measuring software checksum speed

[    0.110149]    arm4regs  :  1178.400 MB/sec

[    0.210198]    8regs     :   567.200 MB/sec

[    0.310244]    32regs    :   501.600 MB/sec

[    0.310259] xor: using function: arm4regs (1178.400 MB/sec)

[    0.310610] NET: Registered protocol family 16

[    0.315446] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.316456] bcm2708.uart_clock = 0

[    0.317532] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.317548] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.317560] mailbox: Broadcom VideoCore Mailbox driver

[    0.317628] bcm2708_vcio: mailbox at f200b880

[    0.317700] bcm_power: Broadcom power driver

[    0.317714] bcm_power_open() -> 0

[    0.317723] bcm_power_request(0, 8)

[    0.818378] bcm_mailbox_read -> 00000080, 0

[    0.818395] bcm_power_request -> 0

[    0.838314] bio: create slab <bio-0> at 0

[    1.000792] raid6: int32x1     46 MB/s

[    1.171273] raid6: int32x2     66 MB/s

[    1.341685] raid6: int32x4     88 MB/s

[    1.511479] raid6: int32x8    100 MB/s

[    1.511496] raid6: using algorithm int32x8 (100 MB/s)

[    1.511506] raid6: using intx1 recovery algorithm

[    1.512152] SCSI subsystem initialized

[    1.512368] usbcore: registered new interface driver usbfs

[    1.512451] usbcore: registered new interface driver hub

[    1.512663] usbcore: registered new device driver usb

[    1.514386] Switching to clocksource stc

[    1.525051] NET: Registered protocol family 2

[    1.526082] TCP established hash table entries: 4096 (order: 3, 32768 bytes)

[    1.526214] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[    1.526290] TCP: Hash tables configured (established 4096 bind 4096)

[    1.526379] TCP: reno registered

[    1.526402] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    1.526433] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    1.526824] NET: Registered protocol family 1

[    1.527315] RPC: Registered named UNIX socket transport module.

[    1.527336] RPC: Registered udp transport module.

[    1.527346] RPC: Registered tcp transport module.

[    1.527355] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.527656] Unpacking initramfs...

[    2.324138] Freeing initrd memory: 5920K (c0a00000 - c0fc8000)

[    2.334874] bcm2708_dma: DMA manager at f2007000

[    2.334997] bcm2708_gpio: bcm2708_gpio_probe c04bc890

[    2.335383] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)

[    2.336285] audit: initializing netlink socket (disabled)

[    2.336369] type=2000 audit(2.330:1): initialized

[    2.346010] VFS: Disk quotas dquot_6.5.2

[    2.346327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    2.348031] NFS: Registering the id_resolver key type

[    2.348125] Key type id_resolver registered

[    2.348141] Key type id_legacy registered

[    2.349642] bio: create slab <bio-1> at 1

[    2.351345] Btrfs loaded

[    2.351400] msgmni has been set to 939

[    2.353072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    2.353097] io scheduler noop registered

[    2.353108] io scheduler deadline registered

[    2.353372] io scheduler cfq registered (default)

[    2.358766] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64

[    2.358785] crc32: self tests passed, processed 225944 bytes in 2583000 nsec

[    2.360751] crc32c: CRC_LE_BITS = 64

[    2.360763] crc32c: self tests passed, processed 225944 bytes in 952000 nsec

[    2.361095] BCM2708FB: allocated DMA memory 5c660000

[    2.361118] BCM2708FB: allocated DMA channel 0 @ f2007000

[    2.371518] Console: switching to colour frame buffer device 82x26

[    2.374655] vchiq: vchiq_init_state: slot_zero = 0xde804000, is_master = 0

[    2.375874] usbcore: registered new interface driver smsc95xx

[    2.376059] usbcore: registered new interface driver cdc_ncm

[    2.376081] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    2.576306] Core Release: 2.80a

[    2.576336] Setting default values for core params

[    2.576382] Finished setting default values for core params

[    2.776453] Using Buffer DMA mode

[    2.776476] Periodic Transfer Interrupt Enhancement - disabled

[    2.776486] Multiprocessor Interrupt Enhancement - disabled

[    2.776498] OTG VER PARAM: 0, OTG VER FLAG: 0

[    2.776568] Dedicated Tx FIFOs mode

[    2.776786] dwc_otg: Microframe scheduler enabled

[    2.776840] dwc_otg bcm2708_usb: DWC OTG Controller

[    2.776893] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1

[    2.776969] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000

[    2.777008] Init: Port Power? op_state=1

[    2.777018] Init: Power Port (0)

[    2.777130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.777149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.777164] usb usb1: Product: DWC OTG Controller

[    2.777178] usb usb1: Manufacturer: Linux 3.10.18+ dwc_otg_hcd

[    2.777192] usb usb1: SerialNumber: bcm2708_usb

[    2.777887] hub 1-0:1.0: USB hub found

[    2.777932] hub 1-0:1.0: 1 port detected

[    2.778294] dwc_otg: FIQ enabled

[    2.778309] dwc_otg: NAK holdoff enabled

[    2.778319] dwc_otg: FIQ split fix enabled

[    2.778338] Module dwc_common_port init

[    2.778859] bcm2835-cpufreq: min=700000 max=840000 cur=700000

[    2.778967] bcm2835-cpufreq: switching to governor performance

[    2.778981] bcm2835-cpufreq: switching to governor performance

[    2.780144] sdhci: Secure Digital Host Controller Interface driver

[    2.780157] sdhci: Copyright(c) Pierre Ossman

[    2.780225] sdhci: Enable low-latency mode

[    2.824447] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA

[    2.824555] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77

[    2.824738] hidraw: raw HID events driver (C) Jiri Kosina

[    2.827006] usbcore: registered new interface driver usbhid

[    2.827020] usbhid: USB HID core driver

[    2.831641] NET: Registered protocol family 17

[    2.831788] Key type dns_resolver registered

[    2.832425] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

[    2.841337] Freeing unused kernel memory: 136K (c048c000 - c04ae000)

[    2.885224] mmc0: new high speed SDHC card at address e624

[    2.886683] mmcblk0: mmc0:e624 SU16G 14.8 GiB 

[    2.888993]  mmcblk0: p1 p2 p3

[    2.975900] Indeed it is in host mode hprt0 = 00021501

[    3.050243] udevd[53]: starting version 175

[    3.294657] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    3.294831] Indeed it is in host mode hprt0 = 00001101

[    3.965299] usb 1-1: New USB device found, idVendor=0424, idProduct=9512

[    3.965325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    3.968243] hub 1-1:1.0: USB hub found

[    3.968514] hub 1-1:1.0: 3 ports detected

[    4.009194] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    4.244836] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    4.345100] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    4.345127] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    4.348107] smsc95xx v1.0.4

[    4.412799] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:66:42:ba

[    4.494723] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

[    4.596612] usb 1-1.2: New USB device found, idVendor=152d, idProduct=2338

[    4.596640] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5

[    4.596654] usb 1-1.2: Product: USB to ATA/ATAPI Bridge

[    4.596666] usb 1-1.2: Manufacturer: JMicron

[    4.596677] usb 1-1.2: SerialNumber: D57CA6613024

[    4.620806] usb-storage 1-1.2:1.0: USB Mass Storage device detected

[    4.621175] scsi0 : usb-storage 1-1.2:1.0

[    4.621641] usbcore: registered new interface driver usb-storage

[    4.694604] usb 1-1.3: new high-speed USB device number 5 using dwc_otg

[    4.795636] usb 1-1.3: New USB device found, idVendor=0ace, idProduct=1215

[    4.795663] usb 1-1.3: New USB device strings: Mfr=16, Product=32, SerialNumber=0

[    4.795677] usb 1-1.3: Product: USB2.0 WLAN

[    4.795689] usb 1-1.3: Manufacturer: ZyDAS

[    5.615844] scsi 0:0:0:0: Direct-Access     WDC WD20 00BB-00GUA0      2D08 PQ: 0 ANSI: 2 CCS

[    5.620392] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)

[    5.621266] sd 0:0:0:0: [sda] Write Protect is off

[    5.621299] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00

[    5.622147] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.622176] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.625009] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.625040] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.642875]  sda: sda1

[    5.647145] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.647176] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.647196] sd 0:0:0:0: [sda] Attached SCSI disk

[    5.658958] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    6.299420] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    6.441816] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    6.446747] btrfs: enabling auto defrag

[    6.446784] btrfs: use lzo compression

[    6.446794] btrfs: disk space caching is enabled

[    6.477334] Btrfs detected SSD devices, enabling SSD mode

[    8.689801] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[    8.928862] btrfs: disk space caching is enabled

[    9.029672] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[    9.072056] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[    9.123177] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   10.286233] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

[   11.115460] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[   11.655731] init: wait-for-state (zram-swapxbmc-done) main process (305) killed by TERM signal

[   11.688386] init: xbmc-failed-start main process (349) killed by TERM signal

[   12.814085] zram: module is from the staging directory, the quality is unknown, you have been warned.

[   12.846907] zram: Created 4 device(s) ...

[   13.061799] Adding 119804k swap on /dev/zram0.  Priority:20 extents:1 across:119804k SS

[   14.286363] Adding 251388k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:251388k SS

[   14.494075] init: failsafe main process (344) killed by TERM signal

[   15.517800] udevd[709]: starting version 175

[   17.949027] ------------[ cut here ]------------

[   17.949057] WARNING: at net/wireless/reg.c:434 0xbf0a214c()

[   17.949067] db.txt is empty, you should update it...

[   17.949076] Modules linked in: cfg80211(+) zram(C) frandom ext4 mbcache jbd2 sg usb_storage rpcsec_gss_krb5

[   17.949116] CPU: 0 PID: 822 Comm: modprobe Tainted: G         C   3.10.18+ #68

[   17.949125] Backtrace: 

[   17.949136] Function entered at [<c0011344>] from [<c00114d4>]

[   17.949147]  r6:bf0a214c r5:00000009 r4:dce5fdb0 r3:076e1ec5

[   17.949164] Function entered at [<c00114bc>] from [<c03f78d8>]

[   17.949174] Function entered at [<c03f78b8>] from [<c001d62c>]

[   17.949183] Function entered at [<c001d5d8>] from [<c001d6ec>]

[   17.949191]  r8:dce5e000 r7:bf0a02ec r6:bf0a02a4 r5:bf0a03c0 r4:bf0a0270

[   17.949191] r3:00000009

[   17.949212] Function entered at [<c001d6b4>] from [<bf0a214c>]

[   17.949220]  r3:00000000 r2:bf09e9b8

[   17.949230] Function entered at [<bf0a20d4>] from [<bf0a2060>]

[   17.949238]  r4:00000000

[   17.949246] Function entered at [<bf0a2000>] from [<c000868c>]

[   17.949254]  r5:bf0a02b0 r4:dce5ff48

[   17.949265] Function entered at [<c0008580>] from [<c00533ec>]

[   17.949274] Function entered at [<c00520c8>] from [<c00537e0>]

[   17.949284] Function entered at [<c0053700>] from [<c000e320>]

[   17.949292]  r6:b73b41f8 r5:00060000 r4:00000000

[   17.949305] ---[ end trace d400c529d663e466 ]---

[   17.949366] cfg80211: Calling CRDA to update world regulatory domain

[   18.495560] usb 1-1.3: reset high-speed USB device number 5 using dwc_otg

[   18.512968] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   18.931830] ieee80211 phy0: Selected rate control algorithm 'pid'

[   18.933548] zd1211rw 1-1.3:1.0: phy0

[   18.933758] usbcore: registered new interface driver zd1211rw

[   20.426203] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   20.816260] device label xbian-beta2 devid 1 transid 410 /dev/mmcblk0p2

[   23.036817] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   23.036851] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[   26.073064] frandom: Seeded global generator now (used by erandom)

[   26.122670] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   26.122699] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[   26.267276] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   26.267309] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[  371.882995] device label xbian-beta2 devid 1 transid 415 /dev/mmcblk0p2

[ 1678.217009] device label xbian-beta2 devid 1 transid 427 /dev/mmcblk0p2

[ 1679.420782] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[ 2580.471233] init: wait-for-state (xbmcxbmc-loaded) main process (5553) killed by TERM signal

[ 2637.712912] init: xbmc main process (5550) killed by TERM signal

[114363.996291] device label xbian-beta2 devid 1 transid 1816 /dev/mmcblk0p2

[114365.051431] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[114408.494163] device label xbian-beta2 devid 1 transid 1819 /dev/mmcblk0p2

[114415.908548] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[202195.739863] device label xbian-beta2 devid 1 transid 2983 /dev/mmcblk0p2

[202197.237647] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[202408.300438] device label xbian-beta2 devid 1 transid 2991 /dev/mmcblk0p2

[202412.546540] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

never mind.....now it works...
i relly don-t know why and how now works....

sorry guys...

thanks for help anyway,.......

I would look at
1) Power supply for the RPi - Must be 1amp or more
2) Power to the USB HUB.
3) Your SD card.

All the indications seem to point at one of the three

Problem again...tree point is OK...but when I start xbmc [attachment=275][attachment=276]

Maybe I because I've disable xbmc service and starts it manually?

Ok - Back to basics.

Can you provide the information requested in Please read before you post - a link is in my signature.

(10th Jan, 2014 03:44 AM)IriDium Wrote: [ -> ]Ok - Back to basics.

Can you provide the information requested in Please read before you post - a link is in my signature.

ok....when i'm at home i will ....

edit...

i've tried again and now works...io really dont know i didn't touch nothing...tomorrow i'll try again ...I have to give you the log anyway?

it is strange....

Ill put my configuration and log
But for now I have this...[attachment=285]

@coloxim

this was bug - appeared 1:10 boots and not for all users.

if you update packages, should be fixed.

Code:

sudo -i

apt-get update

apt-get upgrade

or you wish to upgrade through xbian-config, for this case run:

Code:

sudo -i

mkdir /run/lock; chmod 1777 /run/lock

now you should be able to run xbian-config.

(16th Jan, 2014 12:03 PM)mk01 Wrote: [ -> ]@coloxim

this was bug - appeared 1:10 boots and not for all users.

if you update packages, should be fixed.

Code:

sudo -i apt-get update apt-get upgrade

or you wish to upgrade through xbian-config, for this case run:

Code:

sudo -i mkdir /run/lock; chmod 1777 /run/lock

now you should be able to run xbian-config.

Thanks I'll try...I'm a bit busy last times...
I was updated when I had got bug...

When I'm connect to Ethernet and dont connect raspy to tv I haven't bug....bug when I'm using WiFi key and connect the tv the bug come back...

I'll try update like you said...

I'll report back..

Wink