Forum

Full Version: Older Pi not booting after new Xbian-Update package installed
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Title says it all... I have the original model B with 256M ram.
All runs fine, but the latest xbian-update package breaks it.
after it is installed, reboot the pi, and it sits like it is powered off.
power off and on and the console never even starts up, no rainbow flash with power on, no flicker of the green SDcard activity LED, nothing.
If I reflash the boot of the SD card with the image I made before the xbian-update, it's fine again.
I have tried 3 different SD cards, all with the same result.
Any Ideas?
Please post your config.txt
root@xbian:/boot# more config.txt
initramfs initramfs.gz 0x00a00000
gpu_mem_512=128
gpu_mem_256=100
initial_turbo=0
decode_MPG2=0xxxxxxxxx
disable_overscan=1
emmc_pll_core=0
arm_freq=800
core_freq=250
sdram_freq=400
over_voltage=0
Remove the emmc setting.
That took care of it. Just re-installed the xbian-update and have rebooted several times. No issues at all
Thanks!
Reference URL's