Forum

Hi all,

I have a PCTV nanostick T2 290e which is supported in the latest linux kernel - I have used this device on OpenELEC no problem.

However I have installed 'xbian-package-tvheadend' and gone to the web interface on another computer but the device is not shown - I have made sure it has power and is directly plugged into the pi.

dmesg shows:

Quote:xbian@xbian / $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.12.7+ (root@media) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #5 Sun Jan 19 19:08:40 CET 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 98304
[ 0.000000] free_area_init_node: node 0, pgdat c05a7e90, node_mem_map c05e7000
[ 0.000000] Normal zone: 768 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 98304 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0xd bcm2708.serial=0x3bb69e54 smsc95xx.macaddr=B8:27:EB:B6:9E:54 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lzo,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 786432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 382876K/393216K available (4715K kernel code, 230K rwdata, 696K rodata, 133K init, 229K bss, 10340K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0550e7c (5412 kB)
[ 0.000000] .init : 0xc0551000 - 0xc0572664 ( 134 kB)
[ 0.000000] .data : 0xc0574000 - 0xc05adaa0 ( 231 kB)
[ 0.000000] .bss : 0xc05adaa0 - 0xc05e6f58 ( 230 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000541] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
[ 0.000559] pid_max: default: 32768 minimum: 301
[ 0.000715] Mount-cache hash table entries: 512
[ 0.001398] Initializing cgroup subsys memory
[ 0.001479] Initializing cgroup subsys blkio
[ 0.001522] CPU: Testing write buffer coherency: ok
[ 0.001864] Setting up static identity map for 0xc047d550 - 0xc047d588
[ 0.004348] devtmpfs: initialized
[ 0.014828] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.015104] xor: measuring software checksum speed
[ 0.024314] arm4regs : 1164.000 MB/sec
[ 0.034349] 8regs : 564.000 MB/sec
[ 0.044381] 32regs : 552.000 MB/sec
[ 0.044393] xor: using function: arm4regs (1164.000 MB/sec)
[ 0.044662] NET: Registered protocol family 16
[ 0.049575] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.050820] bcm2708.uart_clock = 0
[ 0.052176] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.052191] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.052201] mailbox: Broadcom VideoCore Mailbox driver
[ 0.052265] bcm2708_vcio: mailbox at f200b880
[ 0.052336] bcm_power: Broadcom power driver
[ 0.052350] bcm_power_open() -> 0
[ 0.052357] bcm_power_request(0, 8)
[ 0.553025] bcm_mailbox_read -> 00000080, 0
[ 0.553037] bcm_power_request -> 0
[ 0.553227] Serial: AMBA PL011 UART driver
[ 0.553336] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 0.570841] bio: create slab <bio-0> at 0
[ 0.588788] raid6: int32x1 54 MB/s
[ 0.605823] raid6: int32x2 82 MB/s
[ 0.623045] raid6: int32x4 109 MB/s
[ 0.640093] raid6: int32x8 117 MB/s
[ 0.640105] raid6: using algorithm int32x8 (117 MB/s)
[ 0.640113] raid6: using intx1 recovery algorithm
[ 0.640762] SCSI subsystem initialized
[ 0.641030] usbcore: registered new interface driver usbfs
[ 0.641170] usbcore: registered new interface driver hub
[ 0.641367] usbcore: registered new device driver usb
[ 0.643064] Switched to clocksource stc
[ 0.643333] FS-Cache: Loaded
[ 0.652451] NET: Registered protocol family 2
[ 0.653470] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.653585] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.653666] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.653737] TCP: reno registered
[ 0.653756] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.653780] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.654124] NET: Registered protocol family 1
[ 0.654533] RPC: Registered named UNIX socket transport module.
[ 0.654551] RPC: Registered udp transport module.
[ 0.654559] RPC: Registered tcp transport module.
[ 0.654566] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.655692] bcm2708_dma: DMA manager at f2007000
[ 0.655781] bcm2708_gpio: bcm2708_gpio_probe c057d960
[ 0.656164] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.657160] audit: initializing netlink socket (disabled)
[ 0.657225] type=2000 audit(0.654:1): initialized
[ 0.657983] zbud: loaded
[ 0.658312] VFS: Disk quotas dquot_6.5.2
[ 0.658383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.658766] FS-Cache: Netfs 'nfs' registered for caching
[ 0.659158] NFS: Registering the id_resolver key type
[ 0.659247] Key type id_resolver registered
[ 0.659261] Key type id_legacy registered
[ 0.659587] bio: create slab <bio-1> at 1
[ 0.659982] Btrfs loaded
[ 0.660193] msgmni has been set to 747
[ 0.661878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.661899] io scheduler noop registered
[ 0.661908] io scheduler deadline registered
[ 0.661932] io scheduler cfq registered (default)
[ 0.665182] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 0.665196] crc32: self tests passed, processed 225944 bytes in 1539000 nsec
[ 0.666826] crc32c: CRC_LE_BITS = 32
[ 0.666836] crc32c: self tests passed, processed 225944 bytes in 784000 nsec
[ 0.667255] BCM2708FB: allocated DMA memory 57940000
[ 0.667275] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.699501] Console: switching to colour frame buffer device 228x61
[ 0.712527] uart-pl011 dev:f1: no DMA platform data
[ 0.712817] Loading iSCSI transport class v2.0-870.
[ 0.715188] libphy: Fixed MDIO Bus: probed
[ 0.715300] usbcore: registered new interface driver smsc95xx
[ 0.715353] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.915528] Core Release: 2.80a
[ 0.915555] Setting default values for core params
[ 0.915598] Finished setting default values for core params
[ 1.115686] Using Buffer DMA mode
[ 1.115705] Periodic Transfer Interrupt Enhancement - disabled
[ 1.115716] Multiprocessor Interrupt Enhancement - disabled
[ 1.115727] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.115798] Dedicated Tx FIFOs mode
[ 1.115990] dwc_otg: Microframe scheduler enabled
[ 1.116041] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.116141] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.116199] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.116237] Init: Port Power? op_state=1
[ 1.116247] Init: Power Port (0)
[ 1.116508] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.116531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116545] usb usb1: Product: DWC OTG Controller
[ 1.116558] usb usb1: Manufacturer: Linux 3.12.7+ dwc_otg_hcd
[ 1.116571] usb usb1: SerialNumber: bcm2708_usb
[ 1.117389] hub 1-0:1.0: USB hub found
[ 1.117463] hub 1-0:1.0: 1 port detected
[ 1.117889] dwc_otg: FIQ enabled
[ 1.117905] dwc_otg: NAK holdoff enabled
[ 1.117913] dwc_otg: FIQ split fix enabled
[ 1.117930] Module dwc_common_port init
[ 1.118379] usbcore: registered new interface driver usb-storage
[ 1.118671] mousedev: PS/2 mouse device common for all mice
[ 1.119396] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[ 1.119518] bcm2835-cpufreq: switching to governor performance
[ 1.119533] bcm2835-cpufreq: switching to governor performance
[ 1.121249] sdhci: Secure Digital Host Controller Interface driver
[ 1.121264] sdhci: Copyright© Pierre Ossman
[ 1.121348] sdhci: Enable low-latency mode
[ 1.151086] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.151283] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.151381] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.151520] hidraw: raw HID events driver © Jiri Kosina
[ 1.151754] usbcore: registered new interface driver usbhid
[ 1.151766] usbhid: USB HID core driver
[ 1.152248] NET: Registered protocol family 17
[ 1.152403] Key type dns_resolver registered
[ 1.155818] zswap: loading zswap
[ 1.155866] zswap: using lz4 compressor
[ 1.159960] Waiting for root device /dev/mmcblk0p2...
[ 1.257178] mmc0: read SD Status register (SSR) after 5 attempts
[ 1.267867] mmc0: new high speed SDXC card at address 0215
[ 1.268384] mmcblk0: mmc0:0215 APPSD 62.5 GiB
[ 1.270306] mmcblk0: p1 p2 p3
[ 1.321196] Indeed it is in host mode hprt0 = 00021501
[ 1.382465] btrfs: device label xbian-copy devid 1 transid 14775 /dev/root
[ 1.384684] btrfs: enabling auto defrag
[ 1.384716] btrfs: use lzo compression
[ 1.384735] btrfs: disk space caching is enabled
[ 1.384744] btrfs: has skinny extents
[ 1.416919] Btrfs detected SSD devices, enabling SSD mode
[ 1.427627] VFS: Mounted root (btrfs filesystem) on device 0:13.
[ 1.428847] devtmpfs: mounted
[ 1.429370] Freeing unused kernel memory: 132K (c0551000 - c0572000)
[ 1.483206] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.483426] Indeed it is in host mode hprt0 = 00001101
[ 1.657554] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.657594] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.658548] hub 1-1:1.0: USB hub found
[ 1.658775] hub 1-1:1.0: 3 ports detected
[ 1.715172] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 1.932358] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.016854] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.016921] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.020157] smsc95xx v1.0.4
[ 2.066232] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b6:9e:54
[ 2.139396] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.224890] usb 1-1.2: New USB device found, idVendor=2013, idProduct=024f
[ 2.224920] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.224932] usb 1-1.2: Product: PCTV 290e
[ 2.224942] usb 1-1.2: Manufacturer: PCTV Systems
[ 2.224953] usb 1-1.2: SerialNumber: 00000010DPUQ
[ 2.299414] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 2.382251] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0610
[ 2.382282] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.382293] usb 1-1.3: Product: USB2.0 Hub
[ 2.383292] hub 1-1.3:1.0: USB hub found
[ 2.383789] hub 1-1.3:1.0: 4 ports detected
[ 2.652393] usb 1-1.3.3: new low-speed USB device number 6 using dwc_otg
[ 2.839587] usb 1-1.3.3: New USB device found, idVendor=04d9, idProduct=1503
[ 2.839616] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.839629] usb 1-1.3.3: Product: USB Keyboard
[ 2.839640] usb 1-1.3.3: Manufacturer:
[ 2.898370] input: USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/input/input0
[ 2.901894] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-bcm2708_usb-1.3.3/input0
[ 3.007924] input: USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.1/input/input1
[ 3.008495] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-bcm2708_usb-1.3.3/input1
[ 11.505814] btrfs: disk space caching is enabled
[ 14.971183] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.152848] btrfs: device label xbian-copy devid 1 transid 14776 /dev/root
[ 15.424368] btrfs: device label xbian-copy devid 1 transid 14776 /dev/root
[ 16.239401] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[ 16.245242] bcm2835-cpufreq: switching to governor powersave
[ 16.245271] bcm2835-cpufreq: switching to governor powersave
[ 16.287417] bcm2835-cpufreq: switching to governor performance
[ 16.287447] bcm2835-cpufreq: switching to governor performance
[ 18.130570] udevd[617]: starting version 175
[ 19.925948] media: Linux media interface: v0.10
[ 20.032307] Linux video capture interface: v2.00
[ 20.342753] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps (2013:024f, interface 0, class 0)
[ 20.342780] em28xx: DVB interface 0 found: isoc
[ 20.355390] em28xx: chip ID is em28174
[ 20.685368] em28174 #0: i2c eeprom 0000: 26 00 01 00 02 09 d8 85 80 80 e5 80 f4 f5 94 90
[ 20.685434] em28174 #0: i2c eeprom 0010: 78 0d e4 f0 f5 46 12 00 5a c2 eb c2 e8 30 e9 03
[ 20.685464] em28174 #0: i2c eeprom 0020: 12 09 de 30 eb 03 12 09 10 30 ec f1 12 07 72 80
[ 20.685492] em28174 #0: i2c eeprom 0030: ec 00 60 00 e5 f5 64 01 60 09 e5 f5 64 09 60 03
[ 20.685521] em28174 #0: i2c eeprom 0040: c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 02 09 92
[ 20.685549] em28174 #0: i2c eeprom 0050: e5 f6 b4 93 03 02 07 e6 c2 c6 22 c2 c6 22 12 09
[ 20.685577] em28174 #0: i2c eeprom 0060: cf 02 06 19 1a eb 67 95 13 20 4f 02 c0 13 6b 10
[ 20.685604] em28174 #0: i2c eeprom 0070: a0 1a ba 14 ce 1a 39 57 00 5c 18 00 00 00 00 00
[ 20.685632] em28174 #0: i2c eeprom 0080: 00 00 00 00 44 36 00 00 f0 10 02 00 00 00 00 00
[ 20.685660] em28174 #0: i2c eeprom 0090: 5b 23 c0 00 00 00 20 40 20 80 02 20 01 01 00 00
[ 20.685687] em28174 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 20.685714] em28174 #0: i2c eeprom 00b0: c6 40 00 00 00 00 a7 00 00 00 00 00 00 00 00 00
[ 20.685741] em28174 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 32
[ 20.685769] em28174 #0: i2c eeprom 00d0: 34 31 30 31 31 36 36 30 31 37 31 32 31 36 44 50
[ 20.685797] em28174 #0: i2c eeprom 00e0: 55 51 00 4f 53 49 30 30 33 30 38 44 30 31 31 30
[ 20.685824] em28174 #0: i2c eeprom 00f0: 44 50 55 51 00 00 00 00 00 00 00 00 00 00 31 30
[ 20.685853] em28174 #0: i2c eeprom 0100: ... (skipped)
[ 20.685872] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x25e02fc0
[ 20.685879] em28174 #0: EEPROM info:
[ 20.685889] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 20.711770] em28174 #0: No audio on board.
[ 20.711798] em28174 #0: 500mA max power
[ 20.711810] em28174 #0: Table at offset 0x39, strings=0x1aa0, 0x14ba, 0x1ace
[ 20.712014] em28174 #0: Identified as PCTV nanoStick T2 290e (card=78)
[ 20.712040] em28174 #0: v4l2 driver version 0.2.0
[ 20.723550] em28174 #0: V4L2 video device registered as video0
[ 20.723578] em28174 #0: dvb set to isoc mode.
[ 20.728310] usbcore: registered new interface driver em28xx
[ 21.335329] gpiochip_find_base: cannot find free range
[ 21.335383] gpiochip_add: gpios -1..1 (cxd2820r) failed to register
[ 21.335409] em28174 #0: /2: frontend initialization failed
[ 21.335421] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 21.941173] Registered IR keymap rc-pinnacle-pctv-hd
[ 21.941661] input: em28xx IR (em28174 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0/input2
[ 21.942188] rc0: em28xx IR (em28174 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0
[ 21.943419] Em28xx: Initialized (Em28xx Input Extension) extension
[ 22.776264] btrfs: device label xbian-copy devid 1 transid 14776 /dev/mmcblk0p2
[ 24.513926] ip_tables: © 2000-2006 Netfilter Core Team
[ 24.795932] nf_conntrack version 0.5.0 (5984 buckets, 23936 max)
[ 27.086893] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 28.620330] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 31.874857] init: failsafe main process (58) killed by TERM signal
[ 48.324274] init: wait-for-state (xbmcxbmc-loaded) main process (922) killed by TERM signal
[ 49.688964] init: xbian-failaccess main process (181) killed by TERM signal
[ 55.901720] init: xbmc-failed-start main process (445) killed by TERM signal
[ 56.046806] init: wait-for-state (zram-swapxbmc-done) main process (932) killed by TERM signal
[ 58.088627] loop: module loaded
[ 58.913381] Adding 380924k swap on /dev/loop0. Priority:15 extents:1 across:380924k FS
[ 62.454490] btrfs: device label xbian-copy devid 1 transid 14776 /dev/mmcblk0p2
[ 76.592174] btrfs: device label xbian-copy devid 1 transid 14777 /dev/mmcblk0p2
[ 77.146767] tun: Universal TUN/TAP device driver, 1.6
[ 77.146804] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 130.988276] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 822.337105] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 1705.689683] btrfs: device label xbian-copy devid 1 transid 14789 /dev/mmcblk0p2
[ 1718.231991] BTRFS debug (device mmcblk0p2): unlinked 6 orphans
[ 2099.981320] btrfs: device label xbian-copy devid 1 transid 14794 /dev/mmcblk0p2
[ 2115.447733] BTRFS debug (device mmcblk0p2): unlinked 7 orphans
[ 2187.057214] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 2368.379366] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 2400.512471] init: tvheadend main process (977) killed by KILL signal
[ 3711.268061] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 3718.014042] btrfs: device label xbian-copy devid 1 transid 14808 /dev/mmcblk0p2
[ 3740.851417] BTRFS debug (device mmcblk0p2): unlinked 6 orphans
[ 3886.720310] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 3968.605870] init: xbian-xbmc-bridge main process ended, respawning
[ 3972.885056] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 3973.603350] init: wait-for-state (kill-splashxbmc-exits) main process (5384) killed by TERM signal
[ 4165.114194] btrfs: device label xbian-copy devid 1 transid 14814 /dev/mmcblk0p2
[ 4283.635328] BTRFS info (device mmcblk0p2): csum failed ino 25114 off 1171456 csum 1509758046 expected csum 1211369701
[ 4287.045997] btrfs: device label xbian-copy devid 1 transid 14815 /dev/mmcblk0p2
xbian@xbian / $

Some others seem to think that's it's something to do with the Kernel version - I am running 3.12.7+

> http://forum.stmlabs.com/showthread.php?tid=12979
>https://github.com/Hexxeh/rpi-firmware/issues/38

Any idea friends?

install newer kernel if that helped others. there is 3.12.20+ at STABLE repo.

but highly recommended 3.15.+ from STAGING (xbian-package-kernel=1.5.2).

anyhow looking at the csum errors on filesystem, looks like underpower.

(2nd Jul, 2014 11:02 AM)mk01 Wrote: [ -> ]install newer kernel if that helped others. there is 3.12.20+ at STABLE repo.

but highly recommended 3.15.+ from STAGING (xbian-package-kernel=1.5.2).

anyhow looking at the csum errors on filesystem, looks like underpower.

What's the safest/easiest way to update?

I've ran a apt-cache search

Quote:xbian@xbian ~ $ sudo apt-cache search xbian-package-kernel
[sudo] password for xbian:
xbian-package-kernel - Latest XBian kernel for the Raspberry Pi (3.12.7+)
xbian-package-kernel-headers - Latest XBian kernel headers for the Raspberry Pi (3.12.7+)
xbian@xbian ~ $

But they are the same Kernel I'm using...

@Ali3n0idd

if you really don't want anything else, then

Code:

sudo -i

cd /tmp

wget http://xbian.brantje.com/pool/staging/main/x/xbian-package-kernel/xbian-package-kernel_3.15.3%2b_armhf.deb

wget http://xbian.brantje.com/pool/staging/main/x/xbian-package-firmware/xbian-package-firmware_1.5.0_armhf.deb

dpkg -i xbian-package-firmware_1.5.0_armhf.deb xbian-package-kernel_3.15.3+_armhf.deb

if you do just

Code:

apt-get update & upgrade

you get 3.12.20+ which is on stable.

Excellent I was able to see my tuner after updating the kernel. Thanks alot, mk01!

Only issue now is a lot of errors on the display, not usuable - TV tuner works fine in other computer with same signal etc.

I have overclocked to turbo but this forces the pi to stop on the xbian logo 'network started' so I can't overclock currently. So this isn't an option for me and I'm not sure why the video shows errors and stutters Dodgy

@Ali3n0id

there are reports that newer kernels & fw doesn't boot on TURBO even before they did. No idea there.
but Turbo is not only option, mine RPIs never booted Turbo and I use personally

Code:

arm_freq=920

core_freq=420

sdram_freq=500

over_voltage=2

that worked before, works even now. try something similar. Maybe you can leave even arm at 1000 and just try lowering core at steps of 20 (from the Turbo which is 500).

I want to discuss something related to this forum, i am new here and i want to know the rules of this forum. Can anybody tell me about this?

What type of topics can be posted here, what things we can post in off-topic boards?

I just wanted to know about you guys, what you are doing here and why you joined this forum? Maybe i will get much information which i don't know

I want to discuss something related to this forum, i am new here and i want to know the rules of this forum. Can anybody tell me about this?

Ali3n0id

mk01

Ali3n0id

mk01

Ali3n0id

mk01

Vernon18

Vernon18

Vernon18

Vernon18