Forum - Xbmc Frozen over Night

Software
XBian version: 1.0RC2
XBMC version: 13.2
Overclock settings: 3 Xbian

Hardware
Power supply rating: 5V 2000 mA
RPi model (model A/B 256mb/512mb): B+
SD card size and make/type: Sandisk Extrem 8 GB
Network (wireless or LAN): Lan
Connected devices (TV, USB, network storage, etc.): 1 TB Hitachi 2.5 Zoll Hdd via Aktiv USB3 Hub

Logile
Link to logfile(s): http://www.d-a-l.de/xbian/xbmc.log
http://www.d-a-l.de/xbian/xbmc.old.log

Problem description:
I Started the Indexing Process with Scraper and the next morning the Xbmc was "Frozen". I could do nothing via Connected Mouse. But via SSH i could reboot the Pi.
After the Reboot Xbmc has forgotten my Screen settings ( Kalibration Settings ).

No Overclocking ( Standart from Installation )

If you want/ need more Info Please leave an Comment.

How to reproduce:
Go to bed an Sleep for the Night.

Thanks for Your Time to Help me.
Im Sorry for my Bad english.

Try removing the Xbian overclock and running the standard settings (700mhz) while doing the media scan.

(1st Sep, 2014 06:33 AM)f1vefour Wrote: [ -> ]Try removing the Xbian overclock and running the standard settings (700mhz) while doing the media scan.

Thanks for the Fast Reply. I will Test it this NOW.

Regards Unitec

If it works without issue perhaps you need to adjust the overclock a bit.

Do you have it set for auto updates by any chance?

skywatch.

(2nd Sep, 2014 04:49 PM)f1vefour Wrote: [ -> ]If it works without issue perhaps you need to adjust the overclock a bit.

Thanks it Worked.

But im not an Overclocker. It Runs at 700 an little Slow but it Runs everithing is fine.

Thanks for your Time.

Regards Unitec

@Unitec.

I would check that you do not have auto-updates set as @Skywatch advised, also I would disable any update addons you may have installed (like library update).

I feel that you can go back to the normal xbian overclock without any issue. As you can still ssh into the RPi there is something else going on.

Try again with xbian settings and if it happens again post the output of dmesg and xbmc.log and we'll see what could be the issue.

Yes I was debugging the issue, I wasn't suggesting leave it at 700.

@IriDium

Thanks for Info so i have to reinstall the IMG. I have Autoupdate Aktivated.
At the Weekend i will do as you Wrote and will do some Test with NO Overclocking an Xbian Overclocking.

If the Error shows i will Post links to the Files. Dodgy

@f1vefour

I know but when it Works ...... Smile

Will do the Tests.

@Skywatch

Yes i had Autoupdate Aktivated.
Sorry Stupid Windows User.
But doing RTFM and Lerning

Thanks a lot for your Time helping an Newbie.

The thing is IriDium it matters if the overclock was unstable on Unitec's particular Pi.

It doesn't matter what the Pi is doing it shouldn't become unresponsive like it did.

Good Morning together.

So i made an New Install with this xbian-image-RPI-20140725 Image.
Xbian 1.0RC2
XBMC 13.1 Git:20140604-84725b0

First Start without LAN and Deaktivated Autoupdate.
Reboot with Lan and Starting scanning Movie´s and Musik with Scraper´s.
Overclocking ( Standart Install ) :840 320 400 0
Addons Installed : Dokumonster.de and Grongh.de
No additional Addons like Screensaver ect..
Device is Runnning for 15 H and 6 Min. and Everyting is Fine.
Xbian brings an Popup with "There is an new version ........"
and APT can Upgrade these Packets:

The following packages have been kept back:
xbian-package-config-xbmc xbian-package-initramfs-tools xbian-package-upstart-xbmc-bridge xbian-package-xbmc
The following packages will be upgraded:
apt apt-utils base-files dpkg libapt-inst1.5 libapt-pkg4.12 libc-bin libc6 libcups2 libgssapi-krb5-2 libk5crypto3
libkrb5-3 libkrb5support0 liblzo2-2 libssl1.0.0 locales multiarch-support openssl xbian-package-config-shell
xbian-package-firmware xbian-package-kernel xbian-package-splash xbian-package-usbmount
xbian-package-xbmc-scripts xbian-update

Will Try with this Updates and Updating this Post

So i Updatet everything.
Xbian 1.0RC3
XBMC 13.2 Git:20140828-c01b568

My Pi dosnt make the problems anymore.
So i searched the Differences betwen this Install and the Other and
i Found one thing an Screensaver: Qlock Screensaver.

This is the Problem maker for my Case.

All the Time the Pi was Overclocked.

Thanks a lot for your Time and Nerves to help me.

Regards Unitec