Forum

I wanted for the ACT led to flash when a button was pressed. While I was following a tutorial, it said to change files in /sys/class/leds/led0. The files are brightness which holds a 1 or a 0 and trigger and others also. Where would that file be in xbian?

If you are looking for missing functionality (especially in sysfs), look for modules first. I honestly didn't know about this functionality so i did as well:


And tadaa:

(29th Nov, 2014 09:14 AM)CurlyMo Wrote: [ -> ]If you are looking for missing functionality (especially in sysfs), look for modules first. I honestly didn't know about this functionality so i did as well:

Code:

root@pi ~ # find /lib -name led*
/lib/modules/3.15.8+/kernel/drivers/leds
/lib/modules/3.15.8+/kernel/drivers/leds/trigger/ledtrig-camera.ko
/lib/modules/3.15.8+/kernel/drivers/leds/trigger/ledtrig-transient.ko
/lib/modules/3.15.8+/kernel/drivers/leds/led-class.ko
/lib/modules/3.15.8+/kernel/drivers/leds/leds-gpio.ko

Code:

root@pi ~ # modprobe leds-gpio

And tadaa:

Code:

root@pi ~ # ls /sys/class/leds/led0/
brightness  device  max_brightness  subsystem  trigger  uevent

Thanks, you learn something new every day! One comment, to anybody else doing this: I had to run modprobe from /sbin

(30th Nov, 2014 01:20 AM)kusti8 Wrote: [ -> ]

(29th Nov, 2014 09:14 AM)CurlyMo Wrote: [ -> ]If you are looking for missing functionality (especially in sysfs), look for modules first. I honestly didn't know about this functionality so i did as well:

Code:

root@pi ~ # find /lib -name led*
/lib/modules/3.15.8+/kernel/drivers/leds
/lib/modules/3.15.8+/kernel/drivers/leds/trigger/ledtrig-camera.ko
/lib/modules/3.15.8+/kernel/drivers/leds/trigger/ledtrig-transient.ko
/lib/modules/3.15.8+/kernel/drivers/leds/led-class.ko
/lib/modules/3.15.8+/kernel/drivers/leds/leds-gpio.ko

Code:

root@pi ~ # modprobe leds-gpio

And tadaa:

Code:

root@pi ~ # ls /sys/class/leds/led0/
brightness  device  max_brightness  subsystem  trigger  uevent

Thanks, you learn something new every day! One comment, to anybody else doing this: I had to run modprobe from /sbin

nice one, so all sorted now? if yes, can you please edit prefix of the thread to [Solved]? thanks