Hello
sorry for the incorret first post. I do my best to do it better:
Systeminformation:
Xbian version 1.0a4
XBMC 12.0-RC1 GIT:20121212-afbeae11(Copiled: DEv 13 2012)
OC with XBIAN Setting
power supply: mumbi Netzteil Garmin nüvi 3790 T etc. Ladegerät 5.4V 1000mAh
USB 1: Hama MCE Remote Control PC-Fernbedienung
USB 2: CNMemory 3TB with external Power Supply
SD-Card: Transcend Extreme-Speed SDHC 16GB Class 10 Speicherkarte (bis 20MB/s Lesen)
i Am using Xbian als Mediaclient and smb-Server for my net. Der first two weeks everythink works fine.
An Saturday first time somethings going strange! Connection to smb get lost ..
I had no time an installe the whole system new. From Saturday until this evening i came out of the office everything also o.k. but then the same Situation as Satuerday
Networkclients lost der Smb- Connection.
In dmesg came the following messages:
http://pastebin.com/YPrqWKXW
What had happened? What must i do, that the system works without this problems?
Every idea welcome.
mini-pi
P.-S. Sorry again!
Can you start by editing your post with the correct markup.
thanks for editing the post
so now it looks much easier to read through and gonna be easier for others to try help you
Hello,
(5th Feb, 2013 06:44 AM)Koenkk Wrote: [ -> ]Can you try upgrading your kernel, firmware and XBMC first? Guide is here: http://forum.xbian.org/thread-370.html
I followed the instructions above and upgraded my system for a few days. The new version looks fine and works good, but today the strange error appears again
http://pastebin.com/7XAMHT5C
uptime
19:26:37 up 2 days, 22:59, 3 users, load average: 0.94, 0.92, 0.65
at the moment i am able to watch a movie but i am not able to connect to the rasp via samba.
Where can i found syslog infos? My Syslog in /var/log/syslog seems to empty!
if I reboot the system the restart doesn´t work. It stopps after the Screen with
XBIAN with letters.
I ´am not able to read whole info because on the left and buttom side there are informations cut up (the displaypictures does not fit in the screen) but theres the line
execute /bin/bash: Permission denied! At this moment it´s not possible to connect over ssh.
Have i install xbian new?
Any ideas? Every ideas are welcome?
mini-pi
Do you mean connect to the RPi through samba from another PC
or
Connect from the RPi with samba to another PC
(9th Feb, 2013 05:39 AM)CurlyMo Wrote: [ -> ]Do you mean connect to the RPi through samba from another PC
or
Connect from the RPi with samba to another PC
yes, plan to use my pi as a fileserver. I want connect from am mac to the pi via samba and this doesn´t work...
(9th Feb, 2013 05:39 AM)Koenkk Wrote: [ -> ]I think your filesystem is corrupted. Can you try applying this? http://forum.xbian.org/thread-421.html .
is it possiple to repair such a corrupt file system with a another linux box?
because my pi doesn´t boot that i can lock in, Iam not able to repair the filesystem as describe in the link you sen
mini-pi
(9th Feb, 2013 06:10 AM)CurlyMo Wrote: [ -> ]Did you install?:
Code:
sudo apt-get install xbian-package-samba
Sorry CurlyMo
i described my problem clear! Samba is installed. And in the last two day the system has as uptime iam always able to connect and use the file on external 3" Space.
Until this evening. The system shows the dmesg messages witch i have poste above
I believe like Koenkk: the file system on the sd carte is corrupt.
mini-pi
I haven't seen any statement about you already having samba installed. But you can try logging into the rescue kernel (if available) and running: fchk /dev/mmcblk0p2
(9th Feb, 2013 06:20 AM)CurlyMo Wrote: [ -> ]I haven't seen any statement about you already having samba installed. But you can try logging into the rescue kernel (if available) and running: fchk /dev/mmcblk0p2
On my linux box i make
fsck -f /dev/mmcblk0p2
some things are to repair. After a second filecheck everything is reportes as o.k.
But:
if I reboot the system the restart doesn´t work. It stopps after the Screen with
XBIAN with letters.
I ´am not able to read whole info because on the left and buttom side there are informations cut up (the displaypictures does not fit in the screen) but theres the line
execute /bin/bash: Permission denied! At this moment it´s not possible to connect over ssh.
Then probably an unfixable corruption.
Hi mini-pi
Where you have written this:
OC with XBIAN Setting
If that means you have used the XBian config menu to overclock beyond the standard XBian overclocking, I would suggest that you try a new SD card and a new install of XBian. However this time, do not overclock beyond the default XBian overclock settings. Overclocking beyond the normal XBian default overclocking of 840 MHz has been known to cause SD card corruption and it appears to me that SD card corruption is the core of your problem.
Good luck.