Forum

Pages: 1 2 3 4 5

Hi,

I have a unbranded Windows Mc Remote, some of the keys are working, some not,

You find her here:

http://wiki.xbmc.org/index.php?title=Remote_Control_Reviews

Ir tried to edit the userdata keyboard.xml, as recomended in:

http://wiki.xbmc.org/index.php?title=Modifying_keyboard.xml

but there isnt a userdata keyboard.xml in the the new xbmc, there is only a remote.xml and the code inside looks very different to the code which is recommended in:
http://wiki.xbmc.org/index.php?title=Modifying_keyboard.xml

So, I dont know what to do, to get all the buttons on the remote working or how to edit the remote.xml.

What code should i change and where can I put the code in?

Someone in the IRC recommended to use this wiki:

http://xbian.org/2012/12/configuring-a-remote-wiki-edition/#

But I dont have a "LIRC" remote or?

Hawk

thesimon@gmx.de

Please try this:
https://github.com/xbianonpi/xbian/issues/71#issuecomment-11419836

If step 3 fails, download the file manually through the manual link and put it on your RPi with WinSCP.

Also post the output of:

Code:

dmesg

Code:

sudo apt-get install usbutils

sudo lsusb

PS. My guide http://xbian.org/2012/12/configuring-a-remote-wiki-edition/# can be followed for all remotes.

Well, the download worked fine, but then :

root@xbian:/home/xbian# tar -zxvf mceusb.tar.gz

gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
root@xbian:/home/xbian# ...

mode2 doesn’t output anything for my remote

dmesg

Code:

[    0.000000] Booting Linux on physical CPU 0

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 3.6.7 (root@pi) (gcc version 4.6.3 (Debian 4.6.3-12+rpi1) ) #2 PREEMPT Tue Nov 27 20:36:53 CET 2012

[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[    0.000000] Machine: BCM2708

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 105472

[    0.000000] free_area_init_node: node 0, pgdat c056b7b8, node_mem_map c0615000

[    0.000000]   Normal zone: 824 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 104648 pages, LIFO batch:31

[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[    0.000000] pcpu-alloc: [0] 0 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 104648

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708.boardrev=0xf bcm2708.serial=0xd755f804 smsc95xx.macaddr=B8:27:EB:55:F8:04 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x19c00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] allocated 843776 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 412MB = 412MB total

[    0.000000] Memory: 411088k/411088k available, 10800k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xda000000 - 0xff000000   ( 592 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xd9c00000   ( 412 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc0510a0c   (5155 kB)

[    0.000000]       .init : 0xc0511000 - 0xc0535c2c   ( 148 kB)

[    0.000000]       .data : 0xc0536000 - 0xc056bf20   ( 216 kB)

[    0.000000]        .bss : 0xc056bf44 - 0xc0614304   ( 673 kB)

[    0.000000] NR_IRQS:330

[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms

[    0.000000] timer_set_mode: unhandled mode:1

[    0.000000] timer_set_mode: unhandled mode:3

[    0.000000] Console: colour dummy device 80x30

[    0.000000] console [tty1] enabled

[    0.001106] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)

[    0.060093] pid_max: default: 32768 minimum: 301

[    0.060448] Mount-cache hash table entries: 512

[    0.061251] Initializing cgroup subsys cpuacct

[    0.061313] Initializing cgroup subsys memory

[    0.061396] Initializing cgroup subsys devices

[    0.061433] Initializing cgroup subsys freezer

[    0.061465] Initializing cgroup subsys blkio

[    0.061579] CPU: Testing write buffer coherency: ok

[    0.061941] hw perfevents: enabled with v6 PMU driver, 3 counters available

[    0.062087] Setting up static identity map for 0x3ae6f8 - 0x3ae754

[    0.063755] devtmpfs: initialized

[    0.072580] NET: Registered protocol family 16

[    0.075254] DMA: preallocated 2048 KiB pool for atomic coherent allocations

[    0.076334] bcm2708.uart_clock = 0

[    0.077737] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.077794] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.077831] mailbox: Broadcom VideoCore Mailbox driver

[    0.077930] bcm2708_vcio: mailbox at f200b880

[    0.078032] bcm_power: Broadcom power driver

[    0.078071] bcm_power_open() -> 0

[    0.078098] bcm_power_request(0, 8)

[    0.578788] bcm_mailbox_read -> 00000080, 0

[    0.578830] bcm_power_request -> 0

[    0.578857] Serial: AMBA PL011 UART driver

[    0.579022] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3

[    0.597923] bio: create slab <bio-0> at 0

[    0.598869] SCSI subsystem initialized

[    0.599120] usbcore: registered new interface driver usbfs

[    0.599236] usbcore: registered new interface driver hub

[    0.599574] usbcore: registered new device driver usb

[    0.600919] Switching to clocksource stc

[    0.601198] FS-Cache: Loaded

[    0.601489] CacheFiles: Loaded

[    0.614303] NET: Registered protocol family 2

[    0.615177] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[    0.615963] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

[    0.616409] TCP: Hash tables configured (established 16384 bind 16384)

[    0.616510] TCP: reno registered

[    0.616558] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    0.616629] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    0.617020] NET: Registered protocol family 1

[    0.617757] RPC: Registered named UNIX socket transport module.

[    0.617817] RPC: Registered udp transport module.

[    0.617849] RPC: Registered tcp transport module.

[    0.617880] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.618731] bcm2708_dma: DMA manager at f2007000

[    0.618868] bcm2708_gpio: bcm2708_gpio_probe c0543e28

[    0.619265] vc-mem: phys_addr:0x00000000 mem_base=0x19c00000 mem_size:0x20000000(512 MiB)

[    0.619630] major device number 252

[    0.619649] vma list size 12, page list size 2008, page size 4096

[    0.619667] allocated dma channel 2 (f2007200), initial state 00000008

[    0.619676] post-reset 00000008

[    0.620341] audit: initializing netlink socket (disabled)

[    0.620458] type=2000 audit(0.600:1): initialized

[    0.745184] VFS: Disk quotas dquot_6.5.2

[    0.745343] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.745834] FS-Cache: Netfs 'nfs' registered for caching

[    0.746281] NFS: Registering the id_resolver key type

[    0.746431] Key type id_resolver registered

[    0.746470] Key type id_legacy registered

[    0.746865] msgmni has been set to 802

[    0.749083] io scheduler noop registered

[    0.749147] io scheduler deadline registered

[    0.749207] io scheduler cfq registered (default)

[    0.754467] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64

[    0.754514] crc32: self tests passed, processed 225944 bytes in 2472000 nsec

[    0.756418] crc32c: CRC_LE_BITS = 64

[    0.756449] crc32c: self tests passed, processed 225944 bytes in 907000 nsec

[    0.775888] Console: switching to colour frame buffer device 160x45

[    0.798319] brd: module loaded

[    0.803833] loop: module loaded

[    0.804388] vcos: [1]: vchiq_init_state: slot_zero = 0xda004000, is_master = 0

[    0.805143] vcos: [1]: vchiq_init_state: called

[    0.805982] vcos: [1]: vchiq: initialised - version 2 (min 2), device 251.0

[    0.806621] usbcore: registered new interface driver smsc95xx

[    0.807018] usbcore: registered new interface driver cdc_ncm

[    0.807221] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    1.012576] Core Release: 2.80a

[    1.012722] Setting default values for core params

[    1.016999] Finished setting default values for core params

[    1.226555] Using Buffer DMA mode

[    1.230788] Periodic Transfer Interrupt Enhancement - disabled

[    1.235150] Multiprocessor Interrupt Enhancement - disabled

[    1.239429] OTG VER PARAM: 0, OTG VER FLAG: 0

[    1.243778] Dedicated Tx FIFOs mode

[    1.248284] dwc_otg: Microframe scheduler enabled

[    1.248355] dwc_otg bcm2708_usb: DWC OTG Controller

[    1.252885] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1

[    1.257420] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000

[    1.261935] Init: Port Power? op_state=1

[    1.266267] Init: Power Port (0)

[    1.270665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.275096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.279408] usb usb1: Product: DWC OTG Controller

[    1.283734] usb usb1: Manufacturer: Linux 3.6.7 dwc_otg_hcd

[    1.288049] usb usb1: SerialNumber: bcm2708_usb

[    1.293236] hub 1-0:1.0: USB hub found

[    1.297481] hub 1-0:1.0: 1 port detected

[    1.302113] dwc_otg: FIQ enabled

[    1.302135] dwc_otg: NAK holdoff enabled

[    1.302157] Module dwc_common_port init

[    1.302549] usbcore: registered new interface driver uas

[    1.306728] Initializing USB Mass Storage driver...

[    1.311340] usbcore: registered new interface driver usb-storage

[    1.315621] USB Mass Storage support registered.

[    1.320136] usbcore: registered new interface driver libusual

[    1.325008] mousedev: PS/2 mouse device common for all mice

[    1.330176] bcm2835-cpufreq: min=700000 max=840000 cur=700000

[    1.330487] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance

[    1.336177] cpuidle: using governor ladder

[    1.343555] cpuidle: using governor menu

[    1.347317] sdhci: Secure Digital Host Controller Interface driver

[    1.351190] sdhci: Copyright(c) Pierre Ossman

[    1.354960] sdhci: Enable low-latency mode

[    1.358888] Registered led device: mmc0::

[    1.401285] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA

[    1.405076] mmc0: BCM2708 SDHC host at 0x20300000 DMA 0 IRQ 16

[    1.408879] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.415345] usbcore: registered new interface driver usbhid

[    1.422289] usbhid: USB HID core driver

[    1.433492] TCP: cubic registered

[    1.439400] Initializing XFRM netlink socket

[    1.445427] NET: Registered protocol family 17

[    1.449465] Key type dns_resolver registered

[    1.456816] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

[    1.461653] registered taskstats version 1

[    1.465943] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

[    1.470526] Waiting for root device /dev/mmcblk0p2...

[    1.490521] mmc0: new high speed SDHC card at address b368

[    1.495107] mmcblk0: mmc0:b368 00000 7.51 GiB 

[    1.501193] Indeed it is in host mode hprt0 = 00021501

[    1.505570]  mmcblk0: p1 p2 p3

[    1.691108] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.695177] Indeed it is in host mode hprt0 = 00001101

[    1.911633] usb 1-1: New USB device found, idVendor=0424, idProduct=9512

[    1.915535] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.922184] hub 1-1:1.0: USB hub found

[    1.926230] hub 1-1:1.0: 3 ports detected

[    2.201308] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    2.321651] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    2.325625] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.336104] smsc95xx v1.0.4

[    2.395461] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:55:f8:04

[    2.491159] usb 1-1.2: new low-speed USB device number 4 using dwc_otg

[    2.616873] usb 1-1.2: New USB device found, idVendor=0755, idProduct=2026

[    2.621161] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.625330] usb 1-1.2: Product: P-05R UIR_V3A

[    2.629425] usb 1-1.2: Manufacturer: www.irfmedia.com 

[    2.639645] input: www.irfmedia.com  P-05R UIR_V3A as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0

[    2.644583] hid-generic 0003:0755:2026.0001: input,hidraw0: USB HID v1.10 Keyboard [www.irfmedia.com  P-05R UIR_V3A] on usb-bcm2708_usb-1.2/input0

[    2.656818] input: www.irfmedia.com  P-05R UIR_V3A as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1

[    2.662137] hid-generic 0003:0755:2026.0002: input,hidraw1: USB HID v1.10 Mouse [www.irfmedia.com  P-05R UIR_V3A] on usb-bcm2708_usb-1.2/input1

[    2.761202] usb 1-1.3: new low-speed USB device number 5 using dwc_otg

[    2.886844] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c517

[    2.892031] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.896711] usb 1-1.3: Product: USB Receiver

[    2.901428] usb 1-1.3: Manufacturer: Logitech

[    4.486013] EXT4-fs (mmcblk0p2): recovery complete

[    4.494939] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    4.499683] VFS: Mounted root (ext4 filesystem) on device 179:2.

[    4.506039] devtmpfs: mounted

[    4.511714] Freeing init memory: 144K

[    5.659758] udevd[142]: starting version 175

[    6.655943] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2

[    6.742490] logitech 0003:046D:C517.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.3/input0

[    6.841208] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor

[    7.100503] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input3

[    7.341371] logitech 0003:046D:C517.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.3/input1

[    9.264614] Adding 1023996k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:1023996k SS

[   11.515082] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[   11.960712] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[   16.453909] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.459108] mmc0: DMA IRQ 6 ignored - results were reset

[   16.466854] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.472113] mmc0: DMA IRQ 6 ignored - results were reset

[   16.478583] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.483890] mmc0: DMA IRQ 6 ignored - results were reset

[   16.497867] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.503330] mmc0: DMA IRQ 6 ignored - results were reset

[   16.509997] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.515400] mmc0: DMA IRQ 6 ignored - results were reset

[   16.522094] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.527529] mmc0: DMA IRQ 6 ignored - results were reset

[   16.534237] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.539724] mmc0: DMA IRQ 6 ignored - results were reset

[   16.546430] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.551886] mmc0: DMA IRQ 6 ignored - results were reset

[   16.558494] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.563879] mmc0: DMA IRQ 6 ignored - results were reset

[   16.570007] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.575109] mmc0: DMA IRQ 6 ignored - results were reset

[   16.581216] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.586229] mmc0: DMA IRQ 6 ignored - results were reset

[   16.592289] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.597117] mmc0: DMA IRQ 6 ignored - results were reset

[   16.603197] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.607918] mmc0: DMA IRQ 6 ignored - results were reset

[   16.613940] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.618660] mmc0: DMA IRQ 6 ignored - results were reset

[   16.624692] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.629431] mmc0: DMA IRQ 6 ignored - results were reset

[   16.635477] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.640277] mmc0: DMA IRQ 6 ignored - results were reset

[   16.646143] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.650895] mmc0: DMA IRQ 6 ignored - results were reset

[   16.657001] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.661898] mmc0: DMA IRQ 6 ignored - results were reset

[   16.667869] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.672881] mmc0: DMA IRQ 6 ignored - results were reset

[   16.678872] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.683817] mmc0: DMA IRQ 6 ignored - results were reset

[   16.689980] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.694888] mmc0: DMA IRQ 6 ignored - results were reset

[   16.700756] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.705643] mmc0: DMA IRQ 6 ignored - results were reset

[   16.711589] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.716428] mmc0: DMA IRQ 6 ignored - results were reset

[   16.722370] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.727282] mmc0: DMA IRQ 6 ignored - results were reset

[   16.733069] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.737912] mmc0: DMA IRQ 6 ignored - results were reset

[   16.743764] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.748571] mmc0: DMA IRQ 6 ignored - results were reset

[   16.754496] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.759302] mmc0: DMA IRQ 6 ignored - results were reset

[   16.765237] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.770143] mmc0: DMA IRQ 6 ignored - results were reset

[   16.776217] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.781036] mmc0: DMA IRQ 6 ignored - results were reset

[   16.787273] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.792187] mmc0: DMA IRQ 6 ignored - results were reset

[   16.798324] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.803157] mmc0: DMA IRQ 6 ignored - results were reset

[   16.809324] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it

[   16.814140] mmc0: DMA IRQ 6 ignored - results were reset

[   19.695857] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[   20.424294] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

lsusb

Code:

root@xbian:/home/xbian# sudo apt-get install lsusb

Reading package lists... Done

Building dependency tree       

Reading state information... Done

E: Unable to locate package lsusb

root@xbian:/home/xbian# sudo lsusb

sudo: lsusb: command not found

root@xbian:/home/xbian#

(20th Dec, 2012 08:53 AM)Hawk Wrote: [ -> ]Well, the download worked fine, but then :

root@xbian:/home/xbian# tar -zxvf mceusb.tar.gz

gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
root@xbian:/home/xbian# ...

Then it didn't download fine Smile

, download it manually and copy the file to your RPi.

My fault, should have been

Code:

sudo apt-get install usbutils

lsusb

With Ubuntu I cant copy because of folder rights O_o and in Windows it shows me only the 36 Mb partition of the SD card.

Use WinSCP, or put in on the partition you see in Windows. Then boot XBian again an copy it:

Code:

sudo mv /boot/mceusb.tar.gz /home/xbian/

Then retry the steps.

Code:

xbian@xbian:~# tar -zxvf mceusb.tar.gz

etc/lirc/

etc/lirc/hardware/

etc/lirc/hardware/srm7500libusb.conf

etc/lirc/hardware/mceusb.conf

etc/lirc/hardware/mceusb_event2.conf

etc/lirc/hardware/lirc_rpi.conf

etc/lirc/hardware/mceusb_event1.conf

etc/lirc/hardware/default.conf

etc/lirc/hardware/mceusb_event0.conf

etc/lirc/hardware.conf

etc/lirc/lircd.conf

etc/lirc/lircmd.conf

etc/lirc/remotes/

etc/lirc/remotes/devinput.conf

etc/lirc/remotes/xbox.conf

etc/lirc/remotes/smt1000t.conf

home/xbian/.xbmc/userdata/Lircmap.xml

usr/local/share/xbmc/system/Lircmap.xml

tar: A lone zero block at 139

Code:

xbian@xbian:~# sudo apt-get install usbutils

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following extra packages will be installed:

  libusb-1.0-0

The following NEW packages will be installed:

  libusb-1.0-0 usbutils

0 upgraded, 2 newly installed, 0 to remove and 1 not upgraded.

Need to get 259 kB of archives.

After this operation, 791 kB of additional disk space will be used.

Do you want to continue [Y/n]? Y

Get:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libusb-1.0-0 armhf 2:1.0.11-1 [36.7 kB]

Get:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main usbutils armhf 1:005-3 [223 kB]

Worked:

Fetched 259 kB in 3s (75.3 kB/s)

lsusb

Selecting previously unselected package libusb-1.0-0:armhf.

(Reading database ... 30453 files and directories currently installed.)

Unpacking libusb-1.0-0:armhf (from .../libusb-1.0-0_2%3a1.0.11-1_armhf.deb) ...

Selecting previously unselected package usbutils.

Unpacking usbutils (from .../usbutils_1%3a005-3_armhf.deb) ...

Processing triggers for man-db ...

Setting up libusb-1.0-0:armhf (2:1.0.11-1) ...

Setting up usbutils (1:005-3) ...

xbian@xbian:~# lsusb

Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. 

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. 

Bus 001 Device 004: ID 0755:2026 Aureal Semiconductor 

Bus 001 Device 005: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser

Worked fine, except that my account got banned for "spamming" ^^

Excuses for this, should not have happened.

But it is correct that the remote is working as it should?

Can you also post the output of:

Code:

cat /proc/bus/input/devices

Also the line should have been:

Code:

tar -xvf mceusb.tar.gz -C /

Some key are working e.g. ESC, PLAY, VIDEO.

But not all, especially the UP/DOWN MOUSE Keys arent working.

Code:

root@xbian:/home/xbian# cat /proc/bus/input/devices

I: Bus=0003 Vendor=0755 Product=2026 Version=0110

N: Name="www.irfmedia.com  P-05R UIR_V3A"

P: Phys=usb-bcm2708_usb-1.2/input0

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0

U: Uniq=

H: Handlers=sysrq kbd event0 

B: PROP=0

B: EV=120013

B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe

B: MSC=10

B: LED=1f

I: Bus=0003 Vendor=0755 Product=2026 Version=0110

N: Name="www.irfmedia.com  P-05R UIR_V3A"

P: Phys=usb-bcm2708_usb-1.2/input1

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1

U: Uniq=

H: Handlers=kbd mouse0 event1 

B: PROP=0

B: EV=1f

B: KEY=4837fff 72ff32d bf544446 0 0 1f0001 20c10 b17c000 267bfa d941dfed 9e1680 4400 0 10000002

B: REL=1c3

B: ABS=1 0

B: MSC=10

I: Bus=0003 Vendor=046d Product=c517 Version=0110

N: Name="Logitech USB Receiver"

P: Phys=usb-bcm2708_usb-1.3/input0

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2

U: Uniq=

H: Handlers=sysrq kbd event2 

B: PROP=0

B: EV=120013

B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe

B: MSC=10

B: LED=1f

I: Bus=0003 Vendor=046d Product=c517 Version=0110

N: Name="Logitech USB Receiver"

P: Phys=usb-bcm2708_usb-1.3/input1

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input3

U: Uniq=

H: Handlers=kbd mouse1 event3 

B: PROP=0

B: EV=1f

B: KEY=c0000000 4837fff 72ff32d bf5c4447 0 0 ff0001 21f94 8b37cc00 677bfa dd71dfed 9ed680 4400 0 10000002

B: REL=1c3

B: ABS=1 0

B: MSC=10

Code:

root@xbian:/home/xbian# tar -xvf mceusb.tar.gz -C /

etc/lirc/

etc/lirc/hardware/

etc/lirc/hardware/srm7500libusb.conf

etc/lirc/hardware/mceusb.conf

etc/lirc/hardware/mceusb_event2.conf

etc/lirc/hardware/lirc_rpi.conf

etc/lirc/hardware/mceusb_event1.conf

etc/lirc/hardware/default.conf

etc/lirc/hardware/mceusb_event0.conf

etc/lirc/hardware.conf

etc/lirc/lircd.conf

etc/lirc/lircmd.conf

etc/lirc/remotes/

etc/lirc/remotes/devinput.conf

etc/lirc/remotes/xbox.conf

etc/lirc/remotes/smt1000t.conf

home/xbian/.xbmc/userdata/Lircmap.xml

usr/local/share/xbmc/system/Lircmap.xml

tar: A lone zero block at 139

Look, what I found:

http://www.irfmedia.com/en/ProductView.asp?ID=130&SortID=160

Thats my remote:

Model NO: IRC6MCE

The IRC6MCE is a RC6 protocol standard remote control for Microsoft MediaCenter.

Is suitable in Card reader(incould RC6 cir)

Parameters

1. Signal type: IRfrared

2. Full 41 keys

3. Transmitting range: than 8 meter,angle 45°

4. Size : 185 x 55 x 30 mm

5. Power support:AAA battery x 2

6. Weight: 225g

Did you reboot after installing my fix?

Or maybe this one, but it doesnt matter, its all the same layout I think.

http://www.irfmedia.com/en/ProductView.asp?ID=140&SortID=157

Nope, but I did now.

Code:

xbian@xbian:~# tar -xvf mceusb.tar.gz -C /

etc/lirc/

etc/lirc/hardware/

etc/lirc/hardware/srm7500libusb.conf

etc/lirc/hardware/mceusb.conf

etc/lirc/hardware/mceusb_event2.conf

etc/lirc/hardware/lirc_rpi.conf

etc/lirc/hardware/mceusb_event1.conf

etc/lirc/hardware/default.conf

etc/lirc/hardware/mceusb_event0.conf

etc/lirc/hardware.conf

tar: etc/lirc/hardware: Cannot utime: Operation not permitted

tar: etc/lirc/hardware: Cannot change mode to rwxr-xr-x: Operation not permitted

etc/lirc/lircd.conf

etc/lirc/lircmd.conf

etc/lirc/remotes/

etc/lirc/remotes/devinput.conf

etc/lirc/remotes/xbox.conf

etc/lirc/remotes/smt1000t.conf

home/xbian/.xbmc/userdata/Lircmap.xml

tar: etc/lirc/remotes: Cannot utime: Operation not permitted

tar: etc/lirc/remotes: Cannot change mode to rwxr-xr-x: Operation not permitted

tar: etc/lirc: Cannot utime: Operation not permitted

tar: etc/lirc: Cannot change mode to rwxr-xr-x: Operation not permitted

usr/local/share/xbmc/system/Lircmap.xml

tar: usr/local/share/xbmc/system/Lircmap.xml: Cannot open: File exists

tar: A lone zero block at 139

tar: Exiting with failure status due to previous errors

Code:

xbian@xbian:~# cat /proc/bus/input/devices

I: Bus=0003 Vendor=0755 Product=2026 Version=0110

N: Name="www.irfmedia.com  P-05R UIR_V3A"

P: Phys=usb-bcm2708_usb-1.2/input0

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0

U: Uniq=

H: Handlers=sysrq kbd event0 

B: PROP=0

B: EV=120013

B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe

B: MSC=10

B: LED=1f

I: Bus=0003 Vendor=0755 Product=2026 Version=0110

N: Name="www.irfmedia.com  P-05R UIR_V3A"

P: Phys=usb-bcm2708_usb-1.2/input1

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1

U: Uniq=

H: Handlers=kbd mouse0 event1 

B: PROP=0

B: EV=1f

B: KEY=4837fff 72ff32d bf544446 0 0 1f0001 20c10 b17c000 267bfa d941dfed 9e1680 4400 0 10000002

B: REL=1c3

B: ABS=1 0

B: MSC=10

I: Bus=0003 Vendor=046d Product=c517 Version=0110

N: Name="Logitech USB Receiver"

P: Phys=usb-bcm2708_usb-1.3/input0

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2

U: Uniq=

H: Handlers=sysrq kbd event2 

B: PROP=0

B: EV=120013

B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe

B: MSC=10

B: LED=1f

I: Bus=0003 Vendor=046d Product=c517 Version=0110

N: Name="Logitech USB Receiver"

P: Phys=usb-bcm2708_usb-1.3/input1

S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input3

U: Uniq=

H: Handlers=kbd mouse1 event3 

B: PROP=0

B: EV=1f

B: KEY=c0000000 4837fff 72ff32d bf5c4447 0 0 ff0001 21f94 8b37cc00 677bfa dd71dfed 9ed680 4400 0 10000002

B: REL=1c3

B: ABS=1 0

B: MSC=10

Can you try this:

Code:

sudo wget -O - https://raw.github.com/xbianonpi/xbian/xbian-alpha4/etc/lirc/hardware.conf > /etc/lirc/hardware.conf

sudo /etc/init.d/lirc restart

And try again?

wget worked

Code:

xbian@xbian:~# tar -xvf mceusb.tar.gz -C /

etc/lirc/

etc/lirc/hardware/

etc/lirc/hardware/srm7500libusb.conf

etc/lirc/hardware/mceusb.conf

etc/lirc/hardware/mceusb_event2.conf

etc/lirc/hardware/lirc_rpi.conf

etc/lirc/hardware/mceusb_event1.conf

etc/lirc/hardware/default.conf

etc/lirc/hardware/mceusb_event0.conf

etc/lirc/hardware.conf

tar: etc/lirc/hardware: Cannot utime: Operation not permitted

tar: etc/lirc/hardware: Cannot change mode to rwxr-xr-x: Operation not permitted

etc/lirc/lircd.conf

etc/lirc/lircmd.conf

etc/lirc/remotes/

etc/lirc/remotes/devinput.conf

etc/lirc/remotes/xbox.conf

etc/lirc/remotes/smt1000t.conf

home/xbian/.xbmc/userdata/Lircmap.xml

tar: etc/lirc/remotes: Cannot utime: Operation not permitted

tar: etc/lirc/remotes: Cannot change mode to rwxr-xr-x: Operation not permitted

tar: etc/lirc: Cannot utime: Operation not permitted

tar: etc/lirc: Cannot change mode to rwxr-xr-x: Operation not permitted

usr/local/share/xbmc/system/Lircmap.xml

tar: usr/local/share/xbmc/system/Lircmap.xml: Cannot open: File exists

tar: A lone zero block at 139

tar: Exiting with failure status due to previous errors

You should run the command as root like you did the first time:

Code:

sudo tar -xvf mceusb.tar.gz -C /

#The following 2 lines are actually one big line

sudo wget -O - https://raw.github.com/xbianonpi/xbian/xbian-alpha4/etc/lirc/hardware.conf > /etc/lirc/hardware.conf

sudo /etc/init.d/lirc restart

Then retry.

Pages: 1 2 3 4 5

Hawk

CurlyMo

Hawk

CurlyMo

Hawk

CurlyMo

Hawk

Hawk321

CurlyMo

Hawk

CurlyMo

Hawk

CurlyMo

Hawk

CurlyMo