Forum

i've configure my remote,
it was recognised as a keyboard/mouse
and have to change a bit remote.xml
(Vol down, home and info keys wasn't working)

it's this remote

here's info :

my remote.xml :
ps : just fast forward is not mapped, it didn't work, but it don't work on the pi.

[attachment=168]

lsusb :

Terminal

...
Bus 001 Device 005: ID 0755:2626 Aureal Semiconductor
...

and the dmseg :

Terminal

[ 3.190300] usb 1-1.3.1: New USB device found, idVendor=0755, idProduct=2626
[ 3.190322] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.190335] usb 1-1.3.1: Product: W-01RN USB_V3.1
[ 3.190345] usb 1-1.3.1: Manufacturer: http://www.irfmedia.com
[ 3.274452] usb 1-1.3.2: new high-speed USB device number 6 using dwc_otg
[ 3.386263] usb 1-1.3.2: New USB device found, idVendor=048d, idProduct=9135
[ 3.386283] usb 1-1.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

complete dmesg : http://pastebin.com/3vXm3UxT

cat /proc/bus/input/devices

Terminal

I: Bus=0003 Vendor=0755 Product=2626 Version=0110
N: Name="www.irfmedia.com W-01RN USB_V3.1"
P: Phys=usb-bcm2708_usb-1.3.1/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=e080ffdf 1cfffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=0755 Product=2626 Version=0110
N: Name="www.irfmedia.com W-01RN USB_V3.1"
P: Phys=usb-bcm2708_usb-1.3.1/input1
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input1
U: Uniq=
H: Handlers=kbd mouse0 event1
B: PROP=0
B: EV=1f
B: KEY=4837fff 72ff32d bf544446 0 0 1f0001 20c10 b17c000 267bfa d941dfed 9e1680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10

Belese

ps : if you have this one, and it act like a mouse, press on the blue key

belese