+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Remotes and CEC support (/forum-26.html)
+--- Thread: Issues with Logitech Harmony (/thread-1824.html)
RE: Issues with Logitech Harmony - mk01 - 1st Dec, 2013 10:30 AM
(28th Nov, 2013 09:50 AM)jphebert Wrote: -Harmony 700 Remote
My Harmony is set up as a Windows Media Center. Let me know if you need any details.
please be sure you don't have "lirc_rpi" line in /etc/modules. then try to reboot. post dmesg. if remote is still "dead", try putting "mceusb" into /etc/modules and reboot (and post dmesg).
also please provide output of:
Code:
ps aux | grep lircRE: Issues with Logitech Harmony - jphebert - 3rd Dec, 2013 01:01 AM
Still nothing.
DMESG here: http://pastebin.com/35BUWJK7
ps aux: http://pastebin.com/UGQiqCcY
I'm at a point where I'd conside a USB-based IR receiver anyone knows will work - any suggestions? Nothing works here. Thanks!
RE: Issues with Logitech Harmony - mk01 - 3rd Dec, 2013 01:38 AM
@jphebert
are you sure you put mceusb into /etc/modules?
there should be line like this be present in dmesg:
"usbcore: registered new interface driver mceusb"
RE: Issues with Logitech Harmony - jphebert - 3rd Dec, 2013 03:56 AM
Here is the dump: http://pastebin.com/NiE7Jf4s
Yup all I got is:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.
mceusb
RE: Issues with Logitech Harmony - mk01 - 3rd Dec, 2013 05:38 AM
@jphebert
ok, after hour googling - iridium was right with lirc_rpi module in /etc/modules, but on top of it "ir-lirc-codec" is required as well.
Code:
modprobe lirc_rpi
modprobe ir-lirc-codec@IriDium
GPIO receiver can't be detected so won't be reported in dmesg.
…
the day will be needed when someone brave will send the equipment to me ready to receive it back month later.
(link where I found much info … stored here to remember http://openelec.tv/forum/124-raspberry-pi/51887-raspberry-pi-gpio-ir-receiver-with-openelec-compilation-patches-and-snapshot?start=75 )
RE: Issues with Logitech Harmony - jphebert - 3rd Dec, 2013 11:33 PM
Hey guys
Thanks - still no IR action. Here is the DMESG: http://pastebin.com/SmserzHs
My /modules file is now:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.
modprobe lirc_rpi
modprobe ir-lirc-codec
mceusb
BTW if you know of a USB IR connector that works out of the box with XBian, let me know I'll order one.
RE: Issues with Logitech Harmony - IriDium - 4th Dec, 2013 05:14 AM
(3rd Dec, 2013 11:33 PM)jphebert Wrote: BTW if you know of a USB IR connector that works out of the box with XBian, let me know I'll order one.
I know CPC do one for the RPi Flicr I've never used it so can't comment. It seems to work on the RPi but Xbian I don't know. It should but I am not going to commit myself. Maybe wait a bit and see if anyone else has any ideas.
See RPi Hardware
RE: Issues with Logitech Harmony - Nakeman - 4th Dec, 2013 05:42 AM
I have HP USB MCE IR Wireless Receiver. It worked out of the box with XBian Alpha 5 but with Beta 2 it doesn't work.
RE: Issues with Logitech Harmony - jphebert - 4th Dec, 2013 06:22 AM
Thanks - any idea why the HP one stopped working? Just ordered one anyway - will will work sooner or later again
RE: Issues with Logitech Harmony - Nakeman - 4th Dec, 2013 07:33 AM
I don't have any idea. Here is what I have tried so far to get it working again: http://forum.xbian.org/thread-1834.html
I think that receiver works fine but XBian has problems to understand it.
RE: Issues with Logitech Harmony - mk01 - 4th Dec, 2013 09:39 AM
http://openelec.tv/forum/103-infared-remotes/68312-mce-remote-not-working-after-boot
?
http://openelec.tv/forum/103-infared-remotes/68101-does-openelec-use-lirc-or-in-kernel-modules#91352
RE: Issues with Logitech Harmony - CurlyMo - 4th Dec, 2013 11:16 PM
Can you do the following and post the output:
Code:
sudo modprobe mceusb
sudo modprobe lirc_dev
cat /proc/bus/input/devicesRE: Issues with Logitech Harmony - Nakeman - 5th Dec, 2013 01:53 AM
@CurlyMo I get this with cat /proc/bus/input/devices: http://pastebin.com/AjjYzHeE
Still only Menu and Info buttons communication with RPi.
@mk01 Replugging doesn't have any effect.
RE: Issues with Logitech Harmony - CurlyMo - 5th Dec, 2013 02:56 AM
Can you now do:
Code:
sudo modprobe mceusb
sudo modprobe lirc_dev
sudo service lirc restart
irwAnd then press some buttons.
RE: Issues with Logitech Harmony - Nakeman - 5th Dec, 2013 07:40 AM
@CurlyMo Only Menu and Info working.