+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Peripherals (/forum-27.html)
+--- Thread: [PROBLEM] HDD wakes up himself after some time (/thread-1974.html)
RE: HDD wakes up himself after some time - feg - 7th Jan, 2014 04:21 AM
I tried this program however now and as I thought my drive is not supported. Is not even on the list in program.
So I don't know what I should do now.
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 04:23 AM
Hmm... Maybe there is an other software which supports your HDD. Just search on http://www.wdc.com
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 11:29 AM
@Alcoinus,
can you post what hdparm is actually doing on the drive ?
Code:
sudo -i
DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplugthe above command will output on screen hdparms action and will run regardles of "nohdparm" setting in /boot/cmdline.txt .
(just btw a better solution to let hdparm work on your xbian is putting "FORCE_RUN=yes" line into /etc/default/hdparm as some parameters in cmdline.txt can change with updates)
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 06:01 PM
@mk01,
The command outputs the following:
Terminal
xbian@xbian ~ $ sudo -i
[sudo] password for xbian:
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~#
[sudo] password for xbian:
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~#
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 08:21 PM
that means no action. can you please put nohdparm to cmdline.txt, reboot a retry?
either hdparm knows action has been already done or there is really no action.
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 08:39 PM
Its the same:
Terminal
[sudo] password for xbian:
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~#
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~# DEVNAME=/dev/sda FORCE_RUN=yes VERBOSE=yes /etc/init.d/hdparm hotplug
[ ok v/sda.
root@xbian:~#
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 08:54 PM
then you can edit /etc/init.d/hdparm
comment "set -e" and insert "set -x"
Code:
#set -e
set -xwhen you run again, you will see line step by step what is happening. you can upload to pastebin. I will go through it.
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 08:58 PM
here it is http://pastebin.com/LZu8YA9M
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 09:20 PM
can you please re-run it after you take root privileges (sudo -i)
you started it as xbian user and the actions failed.
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 09:28 PM
haha ok. here is the new one http://pastebin.com/jyvBVk01
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 09:53 PM
/sbin/hdparm -q -S60 /dev/sda
the same command as usbmounter. the only difference is that hdparm is called from udev from all block devices (including non-rotational) and trying to set this on SD/USB sticks etc. this was causing system locks, slowdowns and other bad things with some combinations of hardware.
XBian is checking /sys/block/sda/queue/rotational to be "1" before that.
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 10:22 PM
okay. but what do you want to say with this to me?
RE: HDD wakes up himself after some time - feg - 7th Jan, 2014 11:23 PM
Hmm, I'm reading posts above and I also don't know how it can resolve our problem (or maybe now only mine because you solved it in a different way)
RE: HDD wakes up himself after some time - mk01 - 7th Jan, 2014 11:37 PM
@Alcoinus
that you should check if the drive is correctly recognized as rotational (as I posted above) and if yes then we have just to find why udev doesn't triggers usbmount as designed and wanted and expected (maybe small bug somewhere) and then this standard setup will work again without researching and hacking.
(literally this one issue won't stay between mystery X-Files)
@feg
unfortunately your issue is different one and probably is related to HDD type and/or firmware. I also have two 1TB usb WD passport drives which are ignoring all kind of trials).
RE: HDD wakes up himself after some time - Alcoinus - 7th Jan, 2014 11:54 PM
ok. i checked and in /sys/block/sda/queue/rotational is a 1.