+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Network (/forum-25.html)
+--- Thread: (Solved) - Improve network speed over lan (/thread-3851.html)
Pages: 1 2
RE: Improve network speed over lan - Nachteule - 27th Oct, 2016 07:41 AM
Congratulations
Would be very interesting which settings is responsible for your speed up.
Maybe one of those ones:
aio read size = 2048
aio write size = 2048
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=131072 SO_SNDBUF=131072
read/write raw is Yes per default
Would be great if you could figure out which settings speeds up your file transfer, so I can modify default smb.conf for XBian for the future
Quote:i cant follow you, what did you mean? "media/MyBook"?
I bought used empty WD MyBook case on eBay and put my old 750GB disk into this case (means recycling of old disk
)
RE: Improve network speed over lan - Harald654 - 27th Oct, 2016 08:27 AM
i will figure it out and search for the best settings on my RPi2
But now its to late, i will do it the next days an give you an update
RE: Improve network speed over lan - Nachteule - 27th Oct, 2016 09:05 AM
No problem, don't hurry
RE: Improve network speed over lan - Harald654 - 30th Oct, 2016 05:55 AM
i´m back
I have tested many values and it is as always not so simple
orginal config:
i get s speed of 8.5 MB/s (and 12.5 MB/s with my Gbit adapter)
with:
aio read size = 2048
aio write size = 2048
it get a speed of 10.9 MB/s (and 14.5 MB/s with my GBit adapter)
with:
socket options = SO_RCVBUF=131072 SO_SNDBUF=131072
i get a speed of 10 MB/s (and 13.3 MB/s wity my GBit adapter)
with both together:
aio read size = 2048
aio write size = 2048
socket options = SO_RCVBUF=131072 SO_SNDBUF=131072
i get the full speed of 11.4 MB/s (and 15,5 MB/s with my GBit adapter)
with:
socket options =PTOS_LOWDELAY
i get not a better speed, but the transfer starts with a higher initial value.
So I think it is a match of these parameters. Surprisingly OSMC uses exactly the parameters from the article: "Samba finetuning for better transfer speeds (ARM)"
Which also explains very well the individual parameters.
So I think the parameters above should be supplemented anyway
I am using aktually the tuning-parameters from the article above, the speed is not thereby increased compared to the parameters of OSMC (I think the 11.5 MB/s are simply the maximum for 100Mbit/s Lan) but i think it's just going more smoothly and the transmission is even more stable (the amount of the transmission swings less)
Maybe it is possible to integrate an opion for "fast SMB" in the XBian settings, witch set the parameters from the article below?
RE: Improve network speed over lan - Nachteule - 30th Oct, 2016 11:23 PM
Good work
I'll put them all into smb.conf and test it here in my environment.
It would be interesting what the raw speed of your GBit adapter is, I mean not the speed from/to USB disk over LAN.
For example:
Mount share from your RPi to your W10 system and then run
Terminal
dd if=/dev/zero of=/mountofyourshare/4G bs=1M count=4096
dd if=/mountofyourshare/4G of=/dev/null bs=1M
on your RPi
RE: Improve network speed over lan - Harald654 - 31st Oct, 2016 12:21 PM
I hope I understood you correctly.
For the test, i created a folder on my SSD on the PC wich i mounted on my RPi2:
Terminal
sudo mount -t cifs -o user=***,pass=**** //****/Downloads /mnt
with xbian(original) settings:
Terminal
xbian@RPi2 ~ $ sudo dd if=/dev/zero of=/mnt/4G bs=1M count=4096
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 196.117 s, 21.9 MB/s
xbian@RPi2 ~ $ sudo dd if=/mnt/4G of=/dev/null bs=1M
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 177.123 s, 24.2 MB/s
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 196.117 s, 21.9 MB/s
xbian@RPi2 ~ $ sudo dd if=/mnt/4G of=/dev/null bs=1M
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 177.123 s, 24.2 MB/s
Terminal
xbian@RPi2 ~ $ sudo dd if=/dev/zero of=/mnt/4G bs=1M count=4096
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 201.157 s, 21.4 MB/s
xbian@RPi2 ~ $ sudo dd if=/mnt/4G of=/dev/null bs=1M
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 177.523 s, 24.2 MB/s
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 201.157 s, 21.4 MB/s
xbian@RPi2 ~ $ sudo dd if=/mnt/4G of=/dev/null bs=1M
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 177.523 s, 24.2 MB/s
RE: Improve network speed over lan - Nachteule - 31st Oct, 2016 09:29 PM
(31st Oct, 2016 12:21 PM)Harald654 Wrote: I hope I understood you correctly.
For the test, i created a folder on my SSD on the PC wich i mounted on my RPi2:
Terminalsudo mount -t cifs -o user=***,pass=**** //****/Downloads /mnt
Yes, exactly.
So you have write speed below 22MB/s and read speed below 25MB/s from RPi's point of view. That's not what I expected (I supposed it should be >= 30MB/s). Maybe your switch is really a speed brake
Thanks for testing
RE: Improve network speed over lan - Harald654 - 1st Nov, 2016 02:21 AM
(31st Oct, 2016 09:29 PM)Nachteule Wrote: Maybe your switch is really a speed brake
NO, its not!
I bought the switch actually for the Dock of my x86 Tablet (the Dock has also only a 100Git Lan and USB 2). Connected to the USB2 port i get there a transfer rate of 40 MB/s for the data transfer from my PC.
I had also expected a higher transfer rate conected to the Rpi2.
Maybe there is something how limited the speed, the 20 MB/s are at least exactly the half of the possible speed via USB 2!
Edit: there is an interesting Link about Gbit adapter on RPi, with iperf benchmarks they geht 321 Mbits/sec (40 MB/sec)
RE: Improve network speed over lan - Nachteule - 1st Nov, 2016 04:39 AM
(1st Nov, 2016 02:21 AM)Harald654 Wrote: (the Dock has also only a 100Git Lan and USB 2)
Hey, what a magic speed
Quote:Edit: there is an interesting Link about Gbit adapter on RPi, with iperf benchmarks they geht 321 Mbits/sec (40 MB/sec)
... but what you get is the speed shown in the graphics
Did you already tried iperf?
RE: Improve network speed over lan - Nachteule - 28th Jan, 2017 04:37 AM
Added optional parameters (see this commit) to /etc/samba/smb.conf and built new xbian-package-samba
RE: Improve network speed over lan - Nachteule - 28th Jan, 2017 04:39 AM
Set to solved