+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Testing & Experimental (/forum-21.html)
+--- Thread: Flexget installation (/thread-634.html)
RE: Flexget installation - mk01 - 1st Aug, 2013 01:44 AM
exactly
RE: Flexget installation - CurlyMo - 1st Aug, 2013 09:02 AM
The xbian-package-samba and xbian-package-apache are also meta packages.
RE: Flexget installation - zilexa - 6th Aug, 2013 01:34 AM
Alright that would be the best. How to do it? I know the four commands:
sudo apt-get install python-pip
sudo pip install flexget
sudo pip install transmissionrpc
Can I just put this in a .py script or similar? I cannot find the xbian-package-samba or xbian-package-apache on Github.. Would be a nice example.
RE: Flexget installation - CurlyMo - 6th Aug, 2013 01:42 AM
Code:
cd ~
mkdir webserver
cd webserver
wget http://xbian.brantje.com/pool/main/x/xbian-package-webserver/xbian-package-webserver_1.0_armhf.deb
ar -x xbian-package-webserver_1.0_armhf.debRE: Flexget installation - zilexa - 6th Aug, 2013 07:56 PM
preinst:
Code:
#!/bin/bash
if [ $1 == "install" ]; then
sudo apt-get install python-pip;
sudo pip install flexget;
sudo pip install transmissionrpc
fipostinst: (to upgrade)
Code:
#!/bin/bash
if [ $1 == "configure" -o $1 == "upgrade" ]; then
if [ -d /usr/local/bin/flexget ]; then
if [ $(flexget -V ... ]; then
sudo /etc/init.d/cron stop;
sudo pip install --upgrade flexget;
sudo /etc/init.d/cron start
fi
fi
fithe 3rd if command needs to check if upgrade is necessary (... has to be replaced). If upgrade is necessary, the flexget -V command will return:
Terminal
xbian@xbian ~ $ flexget -V
1.1.77
Latest release: 1.1.83
1.1.77
Latest release: 1.1.83
So I somehow need to parse this output. Any tips?
RE: Flexget installation - Koenkk - 8th Aug, 2013 06:00 PM
Dont use apt or dpkg commands in the preinst script, add the required package(s) (in this case python-pip) to the control file as depend.
RE: Flexget installation - effemmeffe - 21st Oct, 2013 12:21 AM
I was trying to install flexget using this how to, nut I get the following errors:
CRITICAL plugin Get tvshows 720p hdtv Error connecting to transmission: Address family not supported by protocol
CRITICAL plugin Get movies Error connecting to transmission: Address family not supported by protocol
My transmission settings: http://pastebin.com/8rYUCSek
My libraryupdater.sh: http://pastebin.com/1RcpPSQh
My flexget configuration: http://pastebin.com/2YzpRNhv
Any help appreciated.
RE: Flexget installation - zilexa - 29th Oct, 2013 07:17 AM
@effemmeffe anything related to actually USING Flexget, you should ask at flexget.com. You can search through tickets there or create one yourself.
RE: Flexget installation - zilexa - 25th Mar, 2014 07:01 AM
Hi team XBian, sorry to bump such an old topic. I am determined now to work on the Flexget package (and finish it!). A lot of work has already been done by flexget devs, they created an INSSERV script Debian compatible to be able to autostart Flexget at boot: http://flexget.com/wiki/Daemon/Startup
Since Flexget installation only requires 3 commands (apt-get install python-pip, pip install flexget, pip install transmissionrpc), I thought it should be relatively easy. I wanted to start create the necessary files (I read I have to do a "pull") but not sure if this is still the case?
Could I just start by copying an existing package, and simply modify the control file adding python-pip and the two pip commands?
RE: Flexget installation - zilexa - 28th Mar, 2014 03:28 AM
Any help would be much appreciated
RE: Flexget installation - mk01 - 4th Apr, 2014 10:42 AM
@zilexa
there is currently no flexget install package, ... if I understand it will be more virtual package with some dependencies and then some scripting in pre-post-install phase?
you can start on your own. on git hub create account, create empty repository.
with
Code:
git clone address_to_my_git_repoclone it to your pc.
also clone xbian-package-development (just for the purpose of downloading files you can reuse). then grab from this gen.package.sh and content/DEBIAN/*. keep the structure and use this as starter. do some googling or just read three times content/DEBIAN/{control,postinst,preinst,postrm,prerm}
update them, run .gen.package.sh. and we have .deb file.
if you would need more hints or directions, feel free to ask again.
RE: Flexget installation - jalexandrina - 12th Jul, 2014 07:12 PM
I hope it's not bad form to resurrect an old thread like this, but I'm hoping some of the other contributors, in particular @zilexa will see my post.
I have been setting up Flexget following @zilexa tutorial here: http://www.raspberrypi.org/forums/viewtopic.php?f=35&t=47084
Having read through a lot of the comments and making changes to my config here and there, I have got quite far. Movies on my watchlist at trakt are now found, passed to transmission and end up in my Xbian XBMC.
The problem I have is that TV shows in my custom lists 'following' and 'followinghd' do not get scanned properly and in the log I see 'Undecided'
Code:
2014-07-12 17:00 VERBOSE input_cache Get tvshows hdtv <720p Restored 3 entries from db cache
2014-07-12 17:00 VERBOSE input_cache Get tvshows hdtv <720p Restored 5 entries from cache
2014-07-12 17:00 VERBOSE details Get tvshows hdtv <720p Produced 5 entries.
2014-07-12 17:00 VERBOSE details Get tvshows hdtv <720p Summary - Accepted: 0 (Rejected: 0 Undecided: 5 Failed: 0)Would really appreciate any help or advice on how to troubleshoot this.
Thanks
RE: Flexget installation - zilexa - 18th Jul, 2014 03:32 AM
Nothing to work with here. upload your full log from 1 flexget run (use pastebin.com or similar) and your config.yml. But I recommend you do this on Flexget.com via the ticketing system or flexget forum instead of here on the XBian forum... I rarely look in these forums anymore..
RE: Flexget installation - jalexandrina - 19th Jul, 2014 06:40 PM
Thank you for your reply, I will also try those other suggestions for posting but really appreciate your help also!
Below are the two pastes...
http://pastebin.com/atExut3A
http://pastebin.com/EjGRCUeZ
Thanks