+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Configuration (/forum-17.html)
+--- Thread: rpi crash (/thread-1233.html)
rpi crash - networkpadawan - 14th Aug, 2013 08:10 PM
(don't know if this is the best section, if not, can a mod please move it?)
Hi, yesterday I instaled a fresh beta 1.1, (before I had raspbian + xbmc package) and now every 10 minutes the rpi/xbmc becomes unresponsive. no ssh / no cec on the screen, nothing. Does anyone knows where should I start looking? any log? Its a fresh xbian beta1.1 with 2 custom packages brige-utils and hostapd. oc'ed to medium. thanks in advance.
RE: rpi crash - mk01 - 14th Aug, 2013 08:22 PM
i would for initial pinpointing
1) remove all over clock from config.txt
2) start with xbmc disabled
wait 10 minutes, if ok, put over clock back reboot, wait 10 minutes …
did you check "dmesg" output even right after boot for some unexpected oopses, or errors? check it.
RE: rpi crash - networkpadawan - 14th Aug, 2013 08:25 PM
(14th Aug, 2013 08:22 PM)mk01 Wrote: i would for initial pinpointing
1) remove all over clock from config.txt
2) start with xbmc disabled
wait 10 minutes, if ok, put over clock back reboot, wait 10 minutes …
did you check "dmesg" output even right after boot for some unexpected oopses, or errors? check it.
ok, will do.
RE: rpi crash - rikardo1979 - 14th Aug, 2013 08:34 PM
(14th Aug, 2013 08:25 PM)networkpadawan Wrote:(14th Aug, 2013 08:22 PM)mk01 Wrote: i would for initial pinpointing
1) remove all over clock from config.txt
2) start with xbmc disabled
wait 10 minutes, if ok, put over clock back reboot, wait 10 minutes …
did you check "dmesg" output even right after boot for some unexpected oopses, or errors? check it.
ok, will do.
also if you turn on debuging and get the log you may find some clue in it
Check my signature for link how to post
-thx-
RE: rpi crash - networkpadawan - 15th Aug, 2013 04:00 AM
well here is my log http://pastebin.com/Z1x0KQAW
with oc and without oc the crashes continue...must dig deeper
RE: rpi crash - mk01 - 15th Aug, 2013 04:13 AM
with and without XBMC started ?
RE: rpi crash - networkpadawan - 15th Aug, 2013 05:47 AM
(15th Aug, 2013 04:13 AM)mk01 Wrote: with and without XBMC started ?
xbmc starts on boot but I tested with it stoped after booting...same result
RE: rpi crash - rikardo1979 - 15th Aug, 2013 05:55 AM
- are you connected over RJ45 or WiFi(if WiFi adaptor is used is it plugged directly or over self powered USB Hub)?
- any device except self power ones plugged into RPis USB ports?
- details of your PSU
RE: rpi crash - mk01 - 15th Aug, 2013 06:09 AM
then the only thing I can recommend is:
1) remove loglevel=0 from cmdline.txt
2) let rpi start
3) quit xbmc
4) log into console
5) sudo -i
6) setterm -blank 0
7) service sysklogd start
8) tailf /var/log/syslog & > /dev/console
9) tailf /var/log/kernel & > /dev/console
10) tailf /var/log/dmesg & > /dev/console
and then wait and hopefully something gets on to the screen before you freeze.
Re: rpi crash - f1vefour - 16th Aug, 2013 06:59 AM
This wasn't happening until you enabled hostapd right?
RE: rpi crash - networkpadawan - 16th Aug, 2013 09:09 PM
update. reflashed the card with disabled oc, so far no issues. the only 2 things that might be of interest are on dmesg:
phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
and at boot
init: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
hostapd and bridge-utils are still there so I don't believe they are the culprits.
Re: rpi crash - f1vefour - 17th Aug, 2013 07:49 AM
Access point uses more energy than simply being a client, I'm assuming you have the wireless dongle plugged directly into the Pi?
It seems to be a power issue being removing the overclock helped your problem.
RE: rpi crash - networkpadawan - 17th Aug, 2013 07:27 PM
(17th Aug, 2013 07:49 AM)f1vefour Wrote: Access point uses more energy than simply being a client, I'm assuming you have the wireless dongle plugged directly into the Pi?yes you are correct
It seems to be a power issue being removing the overclock helped your problem.
but with other rpi same psu and same wifi antenna but a simple debian installation the problem didnt occur, even with oc enabled
Re: rpi crash - f1vefour - 18th Aug, 2013 02:29 AM
All hardware is not created equal.