Forum
Xbian exit to console - Printable Version

+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Others (/forum-24.html)
+--- Thread: Xbian exit to console (/thread-1931.html)

Xbian exit to console - wabikboy - 23rd Dec, 2013 05:23 PM

Hi there.
Sorry for my English but I use google translator.
I have a strange problem with xbian, installed it and it worked but this morning I saw only the console screen so I rebooted raspberry pi, after a while started up normally but then again showed up the console. What could be the problem.

RE: Xbian exit to console - mk01 - 23rd Dec, 2013 05:59 PM

did you restore /home content from previous install or other distribution ?

in any case do
Code:
apt-get install --reinstall xbian-package-config-xbmc

if still the same, post /run/upstart-ev.log file

RE: Xbian exit to console - IriDium - 23rd Dec, 2013 09:05 PM

It could be a power issue. Can you cheack the AMP on your power supply. Also post the output from dmesg via pastebin.

RE: Xbian exit to console - wabikboy - 24th Dec, 2013 12:07 AM

Result apt-get install --reinstall xbian-package-config-xbmc

Code:
dpkg: unrecoverable fatal error, aborting:
can not open the file list package "libdevmapper-event1.02.1: armhf": Not a file handle NFS
E: Sub-process /usr/bin/dpkg returned an error code (2)
This i my dmsg list:

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.12+ (root@media) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #61 Fri Sep 27 19:40:13 CEST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 98304
[    0.000000] free_area_init_node: node 0, pgdat c04df134, node_mem_map c0534000
[    0.000000]   Normal zone: 768 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0x100000d bcm2708.serial=0xa2c981d2 smsc95xx.macaddr=B8:27:EB:C9:81:D2 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lzo rootfstype=btrfs rootwait smsc95xx.turbo_mode=N elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 786432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 384MB = 384MB total
[    0.000000] Memory: 383592k/383592k available, 9624k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc048cf2c   (4628 kB)
[    0.000000]       .init : 0xc048d000 - 0xc04aef44   ( 136 kB)
[    0.000000]       .data : 0xc04b0000 - 0xc04dfc20   ( 192 kB)
[    0.000000]        .bss : 0xc04dfc20 - 0xc0533fb8   ( 337 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000408] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000426] pid_max: default: 32768 minimum: 301
[    0.000680] Mount-cache hash table entries: 512
[    0.001346] Initializing cgroup subsys memory
[    0.001460] CPU: Testing write buffer coherency: ok
[    0.001800] Setting up static identity map for 0xc03fa440 - 0xc03fa478
[    0.002996] devtmpfs: initialized
[    0.014128] xor: measuring software checksum speed
[    0.110142]    arm4regs  :  1178.400 MB/sec
[    0.210186]    8regs     :   567.200 MB/sec
[    0.310227]    32regs    :   501.600 MB/sec
[    0.310240] xor: using function: arm4regs (1178.400 MB/sec)
[    0.310595] NET: Registered protocol family 16
[    0.315447] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.316459] bcm2708.uart_clock = 0
[    0.317553] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.317569] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.317580] mailbox: Broadcom VideoCore Mailbox driver
[    0.317652] bcm2708_vcio: mailbox at f200b880
[    0.317723] bcm_power: Broadcom power driver
[    0.317738] bcm_power_open() -> 0
[    0.317747] bcm_power_request(0, 8)
[    0.818401] bcm_mailbox_read -> 00000080, 0
[    0.818419] bcm_power_request -> 0
[    0.838467] bio: create slab <bio-0> at 0
[    1.000866] raid6: int32x1     46 MB/s
[    1.171590] raid6: int32x2     66 MB/s
[    1.341273] raid6: int32x4     88 MB/s
[    1.511665] raid6: int32x8    100 MB/s
[    1.511681] raid6: using algorithm int32x8 (100 MB/s)
[    1.511691] raid6: using intx1 recovery algorithm
[    1.512346] SCSI subsystem initialized
[    1.512570] usbcore: registered new interface driver usbfs
[    1.512655] usbcore: registered new interface driver hub
[    1.512871] usbcore: registered new device driver usb
[    1.514605] Switching to clocksource stc
[    1.525230] NET: Registered protocol family 2
[    1.526267] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.526398] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.526474] TCP: Hash tables configured (established 4096 bind 4096)
[    1.526561] TCP: reno registered
[    1.526584] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.526616] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.527001] NET: Registered protocol family 1
[    1.527496] RPC: Registered named UNIX socket transport module.
[    1.527517] RPC: Registered udp transport module.
[    1.527527] RPC: Registered tcp transport module.
[    1.527536] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.528724] bcm2708_dma: DMA manager at f2007000
[    1.528820] bcm2708_gpio: bcm2708_gpio_probe c04bc890
[    1.529215] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.530197] audit: initializing netlink socket (disabled)
[    1.530282] type=2000 audit(1.510:1): initialized
[    1.539770] VFS: Disk quotas dquot_6.5.2
[    1.540095] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.541797] NFS: Registering the id_resolver key type
[    1.541893] Key type id_resolver registered
[    1.541908] Key type id_legacy registered
[    1.543424] bio: create slab <bio-1> at 1
[    1.545250] Btrfs loaded
[    1.545311] msgmni has been set to 749
[    1.547337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.547362] io scheduler noop registered
[    1.547373] io scheduler deadline registered
[    1.547638] io scheduler cfq registered (default)
[    1.552941] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    1.552956] crc32: self tests passed, processed 225944 bytes in 2595000 nsec
[    1.554985] crc32c: CRC_LE_BITS = 64
[    1.555002] crc32c: self tests passed, processed 225944 bytes in 948000 nsec
[    1.555420] BCM2708FB: allocated DMA memory 57940000
[    1.555443] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.579061] Console: switching to colour frame buffer device 228x61
[    1.594812] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[    1.596082] usbcore: registered new interface driver smsc95xx
[    1.596291] usbcore: registered new interface driver cdc_ncm
[    1.596314] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.796504] Core Release: 2.80a
[    1.796533] Setting default values for core params
[    1.796579] Finished setting default values for core params
[    1.996646] Using Buffer DMA mode
[    1.996665] Periodic Transfer Interrupt Enhancement - disabled
[    1.996676] Multiprocessor Interrupt Enhancement - disabled
[    1.996687] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.996781] Dedicated Tx FIFOs mode
[    1.997004] dwc_otg: Microframe scheduler enabled
[    1.997055] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.997110] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.997176] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.997215] Init: Port Power? op_state=1
[    1.997225] Init: Power Port (0)
[    1.997333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.997354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.997369] usb usb1: Product: DWC OTG Controller
[    1.997383] usb usb1: Manufacturer: Linux 3.10.12+ dwc_otg_hcd
[    1.997396] usb usb1: SerialNumber: bcm2708_usb
[    1.998101] hub 1-0:1.0: USB hub found
[    1.998146] hub 1-0:1.0: 1 port detected
[    1.998507] dwc_otg: FIQ enabled
[    1.998524] dwc_otg: NAK holdoff enabled
[    1.998533] dwc_otg: FIQ split fix enabled
[    1.998552] Module dwc_common_port init
[    1.999076] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[    1.999188] bcm2835-cpufreq: switching to governor performance
[    1.999203] bcm2835-cpufreq: switching to governor performance
[    2.000409] sdhci: Secure Digital Host Controller Interface driver
[    2.000423] sdhci: Copyright(c) Pierre Ossman
[    2.000497] sdhci: Enable low-latency mode
[    2.044670] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.044882] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.045082] hidraw: raw HID events driver (C) Jiri Kosina
[    2.045276] usbcore: registered new interface driver usbhid
[    2.045289] usbhid: USB HID core driver
[    2.045790] NET: Registered protocol family 17
[    2.045944] Key type dns_resolver registered
[    2.046588] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.053131] Waiting for root device /dev/mmcblk0p2...
[    2.194759] Indeed it is in host mode hprt0 = 00021501
[    2.374713] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.374883] Indeed it is in host mode hprt0 = 00001101
[    2.466532] mmc0: new high speed SDHC card at address 0003
[    2.467095] mmcblk0: mmc0:0003 SB08G 7.21 GiB
[    2.471130]  mmcblk0: p1 p2 p3
[    2.486647] device label xbian-beta2 devid 1 transid 1884 /dev/root
[    2.489701] btrfs: enabling auto defrag
[    2.489751] btrfs: use lzo compression
[    2.489763] btrfs: disk space caching is enabled
[    2.529930] Btrfs detected SSD devices, enabling SSD mode
[    2.547409] VFS: Mounted root (btrfs filesystem) on device 0:12.
[    2.557645] devtmpfs: mounted
[    2.558187] Freeing unused kernel memory: 132K (c048d000 - c04ae000)
[    2.575265] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.575295] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.576151] hub 1-1:1.0: USB hub found
[    2.576350] hub 1-1:1.0: 3 ports detected
[    2.854935] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.955588] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.955618] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.958609] smsc95xx v1.0.4
[    3.020138] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c9:81:d2
[    3.114986] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.215596] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
[    3.215625] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.215639] usb 1-1.2: Product: USB 2.0 Hub
[    3.216372] hub 1-1.2:1.0: USB hub found
[    3.216614] hub 1-1.2:1.0: 4 ports detected
[    3.315146] usb 1-1.3: new low-speed USB device number 5 using dwc_otg
[    3.424379] usb 1-1.3: New USB device found, idVendor=0419, idProduct=0001
[    3.424408] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.424422] usb 1-1.3: Product: Cypress USB Mouse
[    3.424434] usb 1-1.3: Manufacturer: Cypress Sem
[    3.525027] usb 1-1.2.3: new high-speed USB device number 6 using dwc_otg
[    3.627249] usb 1-1.2.3: New USB device found, idVendor=0bda, idProduct=8176
[    3.627280] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.627294] usb 1-1.2.3: Product: 802.11n WLAN Adapter
[    3.627306] usb 1-1.2.3: Manufacturer: Realtek
[    3.627317] usb 1-1.2.3: SerialNumber: 00e04c000001
[    4.338670] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.692807] device label xbian-beta2 devid 1 transid 1884 /dev/mmcblk0p2
[    4.738808] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    4.747187] device label xbian-beta2 devid 1 transid 1884 /dev/mmcblk0p2
[   12.031865] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   12.035110] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   12.038300] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   12.104933] init: network-interface (eth0) pre-start process (117) terminated with status 124
[   12.898077] init: failsafe main process (149) killed by TERM signal
[   13.411601] udevd[421]: starting version 175
[   15.128244] samsung 0003:0419:0001.0001: fixing up Samsung IrDA 171 byte report descriptor
[   15.219927] input: Cypress Sem Cypress USB Mouse as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[   15.241937] samsung 0003:0419:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress Sem Cypress USB Mouse] on usb-bcm2708_usb-1.3/input0
[   16.280869] usbcore: registered new interface driver rtl8192cu
[   17.034248] mousedev: PS/2 mouse device common for all mice
[   17.076725] device label xbian-beta2 devid 1 transid 1884 /dev/mmcblk0p2
[   20.410189] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   20.412671] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   20.414860] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   20.417373] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[   20.419498] btrfs: mmcblk0p2 checksum verify failed on 59850752 wanted 23356E92 found 896E9D18 level 0
[  104.281399] init: wait-for-state (zram-swapxbmc-done) main process (106) terminated with status 100
[  104.397717] zram: module is from the staging directory, the quality is unknown, you have been warned.
[  104.422189] zram: Created 4 device(s) ...
[  104.674240] Adding 95228k swap on /dev/zram0.  Priority:20 extents:1 across:95228k SS
[  104.977191] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:250876k SS
[  106.951100] init: failsafe-boot-started pre-start process (823) terminated with status 1
[  108.807602] init: wait-for-state (xbmcxbmc-loaded) main process (333) terminated with status 100
[  109.962720] init: xbmc post-start process (325) terminated with status 1
[  110.748272] init: xbmc main process (324) killed by TERM signal
[  112.044519] device label xbian-beta2 devid 1 transid 1886 /dev/mmcblk0p2
[  114.930029] device label xbian-beta2 devid 1 transid 1887 /dev/mmcblk0p2
[  118.011421] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  118.014447] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  118.021183] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  118.028273] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  118.055280] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  118.062315] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  119.293739] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  119.335514] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  120.662857] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  120.669686] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  121.731298] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  121.738110] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  122.799527] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  122.806502] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  123.867369] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  123.874466] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  124.946143] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  124.952874] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  126.016209] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  126.023193] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  127.084899] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  127.091866] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  128.153154] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  128.160264] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  129.221873] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  129.228674] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  130.289606] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  130.296600] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  131.358001] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  131.364756] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  132.426456] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  132.433487] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  133.495316] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  133.502283] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  134.563277] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  134.570068] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  135.631368] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  135.638068] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  136.854153] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  136.874247] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  137.970406] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  137.982862] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  139.079102] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  139.085822] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  140.186522] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  140.196466] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  141.322733] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  141.330621] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  142.418053] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  142.425150] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  143.485812] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  143.492655] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  145.162996] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  145.202107] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  148.365716] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  148.921221] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  149.981931] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  149.988887] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  151.405785] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0
[  151.417066] btrfs csum failed ino 37089 extent 1128030208 csum 2918903775 wanted 3854335018 mirror 0


RE: Xbian exit to console - IriDium - 24th Dec, 2013 12:51 AM

Looks like you have a corruption. Have you installed anything else or shutdown Xbian by pulling the cable?

I'd suggest reformatting and trying again.

Also you never said what your power supply was - that could also be the issue.

RE: Xbian exit to console - wabikboy - 24th Dec, 2013 05:27 PM

Installing a new xbian helped. I read my temperature and changed the file default.py in the weather, or it could cause damage to xbian?

RE: Xbian exit to console - IriDium - 25th Dec, 2013 03:36 AM

I've no idea what you mean "read my temperature" or what you changed in default.py (There are a lot of them)

But it shouldn't cause Xbian to crash.

I still need the output from dmesg and your power supply ratings to try and solve this issue.