+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Configuration (/forum-17.html)
+--- Thread: [PROBLEM] VPN established, but no files (/thread-2229.html)
VPN established, but no files - Sims - 12th Apr, 2014 05:10 AM
Hi everybody, I've successfully connected to my NAS at home, and the connection is visible in my config. But when I try to find files from the NAS nothing comes up.
Terminal
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
local IP address 192.168.0.2
remote IP address 192.168.0.1
Connect: ppp0 <--> /dev/pts/2
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
local IP address 192.168.0.2
remote IP address 192.168.0.1
Update:
When I close the connection:
Terminal
Sent 0 bytes, received 36609 bytes.
So no connection out, only in.
RE: VPN established, but no files - Sims - 14th Apr, 2014 02:10 AM
I think it has something to do with routing, when I route all traffic to the ppp0 interface, I can't reach it via SSH
RE: VPN established, but no files - mk01 - 18th Apr, 2014 11:58 PM
you have to route just the 0.x segment to ppp0 on server side.
part of each 'vpn' howto guide is section discussing this, checks docs again.