+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Remotes and CEC support (/forum-26.html)
+--- Thread: IR Prob (/thread-2536.html)
IR Prob - uvknd - 28th Oct, 2014 01:25 AM
I have a problem With IR its not working ( i'm using RPI B + and mini remote similar that picture below and IR connected directly to gpio )
Any tips to get it working ?
How Can i Test IR if working or not ?
RE: IR Prob - rikardo1979 - 28th Oct, 2014 02:39 AM
did you follow all the wiki steps?
RE: IR Prob - uvknd - 28th Oct, 2014 08:45 AM
(28th Oct, 2014 02:39 AM)rikardo1979 Wrote: did you follow all the wiki steps?
Yes , i commend mode2 but i got nothing ( i tried many remotes ) but when i touch the wires i got some results without using remote
root@xbian:~# mode2
space 989187
space 894
space 413
space 387
space 866
space 835
No pulses just only spaces
No results with irw cmd
RE: IR Prob - f1vefour - 29th Oct, 2014 04:45 AM
Sounds like you need to change from the 3.3v to 5v power or vice versa.
RE: IR Prob - uvknd - 29th Oct, 2014 07:15 AM
(29th Oct, 2014 04:45 AM)f1vefour Wrote: Sounds like you need to change from the 3.3v to 5v power or vice versa.
I already tried that but i got a huge spaces list without using remote
when i press on any key on remote i see some difference spaces get faster
With irw command no results and Xbian too.
My IR Like This
RE: IR Prob - f1vefour - 29th Oct, 2014 01:28 PM
Do you know which specific model it is?
RE: IR Prob - uvknd - 29th Oct, 2014 10:38 PM
(29th Oct, 2014 01:28 PM)f1vefour Wrote: Do you know which specific model it is?Model : LFN on LR Head it's taken from car Mp3 cigarette hub
I think its SparkFun 708-5086P --- TSOP382
RE: IR Prob - uvknd - 31st Oct, 2014 08:41 AM
any ideas ?
RE: IR Prob - f1vefour - 31st Oct, 2014 12:28 PM
What do you mean when you touch the wires?
Have you loaded the module?
RE: IR Prob - Skywatch - 31st Oct, 2014 06:51 PM
Take a look at ....... https://www.sparkfun.com/datasheets/Sensors/Infrared/tsop382.pdf
This is the data sheet and it shows a recommended resistor in the power lead and a capacitor should be added. Try that first.
Also note that there are 6 different carrier frequencies for these devices (like different radio channels) and it *could* be that all your remotes are on a different frequency modulation....
Did the receiver diode and remote work together before?
Skywatch.
RE: IR Prob - uvknd - 31st Oct, 2014 08:10 PM
(31st Oct, 2014 12:28 PM)f1vefour Wrote: What do you mean when you touch the wires?i mean when i touch any wire of 3 i got spaces result only
Have you loaded the module?
yes ir already connected
(31st Oct, 2014 06:51 PM)Skywatch Wrote: Take a look at ....... https://www.sparkfun.com/datasheets/Sensors/Infrared/tsop382.pdfso why adafruit using ir directly as picture.
This is the data sheet and it shows a recommended resistor in the power lead and a capacitor should be added. Try that first.
Also note that there are 6 different carrier frequencies for these devices (like different radio channels) and it *could* be that all your remotes are on a different frequency modulation....
Did the receiver diode and remote work together before?
Skywatch.
-can you tell me the model of resistor and a picture for it
RE: IR Prob - Skywatch - 1st Nov, 2014 04:22 AM
Did you look at the link and the diagrams? The text gives a range of values, but I don't know about the Adafruit product and so can't comment on that. Maybe contact Adafruit and ask them?
Does it work on other distros or is it just xbian you have a problem with?
Skywatch.
RE: IR Prob - uvknd - 1st Nov, 2014 09:32 PM
(1st Nov, 2014 04:22 AM)Skywatch Wrote: Did you look at the link and the diagrams? The text gives a range of values, but I don't know about the Adafruit product and so can't comment on that. Maybe contact Adafruit and ask them?that's will be complicated because i'm very busy and i don't have this tools at this time
Does it work on other distros or is it just xbian you have a problem with?
Skywatch.
no its not working with any other Xbmc
i tried this one but its not working
RE: IR Prob - uvknd - 3rd Nov, 2014 11:40 PM
Any Help?
no need to shout, people doing this as a hobby. nobody is paid for anything here. everyone can see your thread, so if you do not have a straight answer usually it means they do not have the answer