Forum
[SOLVED] Upgrading to Jessie - Printable Version

+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Configuration (/forum-17.html)
+--- Thread: [SOLVED] Upgrading to Jessie (/thread-3090.html)

Pages: 1 2 3 4 5 6


RE: upgrade fun (6 sept 2015) - Skywatch - 11th Sep, 2015 06:29 AM

Thank you for posting this Exnor, I am sure it will be helpful to some out there.

Sadly it still doesn't work for me. I have 19 updrades showing but still get the "Serious Error" message as in the first post here and then that's it!

Grrrrr.


RE: upgrade fun (6 sept 2015) - Dave400 - 11th Sep, 2015 07:50 PM

I'm still waiting for the xbian-package-xbmc to be released (been held back for a while now)


RE: upgrade fun (6 sept 2015) - Skywatch - 12th Sep, 2015 05:29 AM

I tried again today, 21 updates available.

Still the same problem. Huh Huh Huh


RE: xbian-update fails - Skywatch - 12th Sep, 2015 06:03 AM

I get errors too.....21 packages to update, but it won't update!


RE: xbian-update fails - CurlyMo - 12th Sep, 2015 08:16 AM

I think it's because the Jessie change. Wheezy is not updated anymore, so the packages you see depend on Jessie. So until a good upgrade procedure is released for Wheezy to Jessie, you'll have to wait.


RE: xbian-update fails - jbernardo - 13th Sep, 2015 04:56 PM

(12th Sep, 2015 08:16 AM)CurlyMo Wrote:  I think it's because the Jessie change. Wheezy is not updated anymore, so the packages you see depend on Jessie. So until a good upgrade procedure is released for Wheezy to Jessie, you'll have to wait.

Ouch... That might mean some large issues, with Jessie trying to force systemd on everyone and xbian running upstart.

Anyway, today the error seems to be a missing GPG signature:
Code:
$ sudo apt-get update
Get:1 http://http.debian.net stable Release.gpg [2,373 B]
Hit http://www.mirrorservice.org/sites/apt.xbian.org/ stable Release.gpg                        
Hit http://http.debian.net stable Release
Hit http://www.mirrorservice.org/sites/apt.xbian.org/ stable Release
Ign http://http.debian.net stable Release
Hit http://www.mirrorservice.org/sites/apt.xbian.org/ stable/main armhf Packages
Hit http://http.debian.net stable/main armhf Packages
Hit http://http.debian.net stable/non-free armhf Packages                              
Hit http://www.mirrorservice.org/sites/apt.xbian.org/ stable/rpi-jessie armhf Packages  
Hit http://http.debian.net stable/main Translation-en                                    
Hit http://http.debian.net stable/non-free Translation-en
Ign http://http.debian.net stable/main Translation-en_US          
Ign http://http.debian.net stable/non-free Translation-en_US      
Ign http://www.mirrorservice.org/sites/apt.xbian.org/ stable/main Translation-en_US
Ign http://www.mirrorservice.org/sites/apt.xbian.org/ stable/main Translation-en
Ign http://www.mirrorservice.org/sites/apt.xbian.org/ stable/rpi-jessie Translation-en_US
Ign http://www.mirrorservice.org/sites/apt.xbian.org/ stable/rpi-jessie Translation-en
Fetched 2,373 B in 16s (141 B/s)                                                                                                                                          
Reading package lists... Done
W: GPG error: http://http.debian.net stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010 NO_PUBKEY CBF8D6FD518E17E1

Of course,, these can be worked around by the following:
Code:
gpg --keyserver pgpkeys.mit.edu --recv-key 8B48AD6246925553
gpg -a --export 8B48AD6246925553 | sudo apt-key add -
gpg --keyserver pgpkeys.mit.edu --recv-key 7638D0442B90D010
gpg -a --export 7638D0442B90D010 | sudo apt-key add -
gpg --keyserver pgpkeys.mit.edu --recv-key CBF8D6FD518E17E1
gpg -a --export CBF8D6FD518E17E1 | sudo apt-key add -
Which will add the missing "Debian Archive Automatic Signing Key (7.0/wheezy) <ftpmaster@debian.org>", "Debian Archive Automatic Signing Key (8/jessie) <ftpmaster@debian.org>" and "Jessie Stable Release Key <debian-release@lists.debian.org>" to the apt database.

PS: 400+ packages to be installed, between updates and new dependencies. I think I will only risk this because I can always go back to the last known good btrfs snapshot.


RE: xbian-update fails - CurlyMo - 13th Sep, 2015 06:00 PM

I fixed the missing keys already:
https://github.com/xbianonpi/xbian-package-repo/commit/bd7fef9bde5d92ae94b8cc585c07090cd34dafd2

I updated myself yesterday and everything went fine. Despite the whole systemd/upstart risks.


RE: xbian-update fails - jbernardo - 13th Sep, 2015 06:17 PM

(13th Sep, 2015 06:00 PM)CurlyMo Wrote:  I fixed the missing keys already:
https://github.com/xbianonpi/xbian-package-repo/commit/bd7fef9bde5d92ae94b8cc585c07090cd34dafd2

I updated myself yesterday and everything went fine. Despite the whole systemd/upstart risks.

I just had to rollback to the last known good snapshot. I got one of those typical systemd errors (failed to start user@1000.service) on dmesg, and a black screen as kodi didn't start. I think I'll wait a couple of days before trying again to upgrade.


RE: xbian-update fails - CurlyMo - 13th Sep, 2015 07:53 PM

Did you run a dist-upgrade or a normal upgrade?


RE: xbian-update fails - jbernardo - 13th Sep, 2015 09:45 PM

(13th Sep, 2015 07:53 PM)CurlyMo Wrote:  Did you run a dist-upgrade or a normal upgrade?

A normal upgrade, I will try again.

It dies the same way (at least network is working):
Code:
[   11.225275] BTRFS info (device mmcblk0p2): disk space caching is enabled
[   12.382331] init: xbian-failaccess main process (475) killed by TERM signal
[   13.727020] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   14.717623] systemd-udevd[1058]: starting version 215
[   14.900488] vchiq: vchiq_init_state: slot_zero = 0xae080000, is_master = 0
[   15.182113] bcm2708_i2c_init_pinmode(1,2)
[   15.182142] bcm2708_i2c_init_pinmode(1,3)
[   15.182912] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[   15.184662] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[   15.185524] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80)
[   15.267875] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC7E1
[   15.355595] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   15.355622] cdrom: Uniform CD-ROM driver Revision: 3.20
[   15.356750] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   15.374239] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   15.495759] pcm512x 1-004d: Failed to reset device: -5
[   15.495815] pcm512x: probe of 1-004d failed with error -5
[   15.496084] pcm512x 1-004c: Failed to reset device: -5
[   15.496129] pcm512x: probe of 1-004c failed with error -5
[   26.432928] init: failsafe main process (361) killed by TERM signal
[   27.512801] init: portmap main process (1502) terminated with status 2
[  114.170170] init: wait-for-state (zram-swapxbmc-done) main process (1277) killed by TERM signal
[  122.543800] init: ssh main process (2104) terminated with status 255
[  122.543991] init: ssh main process ended, respawning
[  125.655661] Adding 251388k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:251388k SSFS
[  326.596422] systemd-logind[2867]: New seat seat0.
[  326.625793] systemd-logind[2867]: Failed to start user service: Unknown unit: user@1000.service
[  326.645602] systemd-logind[2867]: New session c1 of user xbian.

journalctl gives a "No journal files were found." error.


RE: xbian-update fails - Fabio72 - 13th Sep, 2015 09:52 PM

(13th Sep, 2015 09:45 PM)jbernardo Wrote:  
(13th Sep, 2015 07:53 PM)CurlyMo Wrote:  Did you run a dist-upgrade or a normal upgrade?

A normal upgrade, I will try again.

The same to me. Now I have a systemd installation.
Kodi starts at boot then close letting me with some x11 messages on screen.
If I restarts Kodi by console then everything seems working, but at every boot I have to start xbmc manually
I'm getting the "failed to start user@1000.service" like error on dmesg

Also watchdog cannot install claiming errors on MAKEDEV


So I reverted back
Is it aspected to switch to systemd or we remains on upstart?


RE: xbian-update fails - jbernardo - 13th Sep, 2015 10:37 PM

(13th Sep, 2015 09:52 PM)Fabio72 Wrote:  Is it aspected to switch to systemd or we remains on upstart?

Unfortunately, I am afraid that upstart is gone, so xbian either switches to systemd or to openrc. For me, openrc would be better (and I used systemd on arch for over 3 years), but the switch to systemd might be the easiest at first.

I am now setting up another card with the latest version of xbian, and will then restore my xbian home directory to it, it should work.


RE: upgrade fun (6 sept 2015) - mansp - 13th Sep, 2015 11:50 PM

Hi,

I updated some 20-30 updates, had to ignore xbian-update because of a "serious error" dependency libcec >3.xx.
Rebooted, and now i have ~250 updates. Which If I try to install fails. Anybody knows whats up with the updates right now?

I have the RPi2


RE: upgrade fun (6 sept 2015) - CurlyMo - 14th Sep, 2015 12:35 AM

Please post the failure.


RE: xbian-update fails - Bastlwastl - 14th Sep, 2015 12:50 AM

Works like a charme here
Imported the keys and make a normal update