+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Installation (/forum-16.html)
+--- Thread: Black screen after initialization (/thread-3148.html)
Black screen after initialization - demo44 - 9th Oct, 2015 09:27 PM
Software
XBian version: Xbian latest rpi (on the installer)
XBMC/Kodi version: same
Overclock settings: no OC
Hardware
Device type and model (e.g. Raspberry Pi Model A/B 256/512 MB, CuBox-i i4Pro, ...): Raspberry Pi model B
Power supply rating: 5V/0.7A
SD card size and make/type: 4Go
Network (Ethernet or wireless): Ethernet
Connected devices (TV, USB, network storage, ...): TV (hdmi)
Log files
Link to logfile(s):
Problem description:
First time, I installed the latest version with the laucher on windows, everythings go well. I pluged my rapsberry with the SD card, and after the stead "Lauching Kodi" the screen goes black and i couldn't do anything. I tried to switch off/switch on my TV, but nothing.
Second time is used Win32DiskImager to install the XBian_2015.09.26_rpi.img and i get exactly the same problem.
How to reproduce:
I don't know.
Can somebody help me to install Xbian ?
Thank for answer
RE: Black screen after initialization - demo44 - 11th Oct, 2015 03:22 AM
Somebody ?
RE: Black screen after initialization - snarf - 12th Oct, 2015 11:55 PM
Have you tried using a different power supply? One that delivers more than 700mA?
Have you used any other linux distros other than Xbian? Did they work?
RE: Black screen after initialization - demo44 - 13th Oct, 2015 02:07 AM
(12th Oct, 2015 11:55 PM)snarf Wrote: Have you tried using a different power supply? One that delivers more than 700mA?
Have you used any other linux distros other than Xbian? Did they work?
Yes, I've tried with a 2000mA too. But same problem.
Before installing Xbian, my raspberry was under RaspBMC and everything were ok, i used it like 1 or 2 years... Now i want to switch to Xbian because it's still developt, not RaspBMC :/
RE: Black screen after initialization - CurlyMo - 13th Oct, 2015 02:12 AM
Did you not know OSMC is the new RaspBMC?
RE: Black screen after initialization - rikardo1979 - 14th Oct, 2015 12:30 AM
what kind of PSU are you using? dos it have fized USB cable or are you always using same USB<>Micro USB cable with different PSU?
What about LEDs on RPi when it goes black? Any sign?
Did you try SSH when its black?
RE: Black screen after initialization - stevewalsh - 16th Oct, 2015 07:56 PM
I was having the same problem - everything looked nice until it finished booting, then a black screen....
I added this line to my config.txt file in the /boot partition and after rebooting, I could see everything as I should (the bootup logo's are now massive but I can live with that)...
hdmi_safe=1
I just added the extra line at the bottom.
(fortunately the boot partition is visible in Windows so if you don't like SSH / vi etc... you can plug the SD card into a suitable card slot/adapter and add the line using notepad etc... )
I hope this helps,
Steve
RE: Black screen after initialization - Killerbee - 21st Oct, 2015 06:19 AM
change
disable_overscan=1
to
disable_overscan=0
in the config.txt file worked for me
KB
RE: Black screen after initialization - StartledCat - 6th Nov, 2015 04:53 AM
I have the same problem (posted as a new issue today)...basically I have two boot sd cards, one for the latest image and one from v14.something....both config.txt are the same - the old one runs perfectly, the new one does not i.e. loss of video during Loading Kodi splash screen.
Tried disable_oversacn ...still no change :-(
RE: Black screen after initialization - StartledCat - 28th Nov, 2015 08:05 AM
Are you still stuck with this issue - I am...I tested/tried OSMC and that's working fine :-)
RE: Black screen after initialization - CurlyMo - 28th Nov, 2015 07:31 PM
Was this issue posted on github already?
RE: Black screen after initialization - StartledCat - 28th Nov, 2015 10:41 PM
Not sure - I've not been there before.
However, I seem to have progressed....updates on my thread http://forum.xbian.org/thread-3211.html
RE: Black screen after initialization - StartledCat - 1st Dec, 2015 06:33 AM
Seems to have been fixed i.e. for the latest 29-11 update the video is back :-)...see my thread (link above)