Quote:xbian@xbian ~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.10+ (jenkins@vps01) (gcc version 4.7.3 (Ubuntu/ Linaro 4.7.3-12ubuntu1) ) #1 Sun Oct 11 13:45:27 CEST 2015
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr =00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruc tion cache
[ 0.000000] Machine model: Raspberry Pi Model B Plus Rev 1.2
[ 0.000000] cma: Reserved 16 MiB at 0x16000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 94208
[ 0.000000] free_area_init_node: node 0, pgdat c06f6654, node_mem_map d5cb300 0
[ 0.000000] Normal zone: 828 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 94208 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 93380
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x10 bcm2708.serial=0xbc30cbbc smsc95x x.macaddr=B8:27:EB:30:CB:BC bcm2708_fb.fbswap=1 bcm2708.disk_led_gpio=47 bcm2708 .disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0 x1ec00000 vc_mem.mem_size=0x20000000 telnet zswap.enabled=1 zswap.compressor=lz 4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmc blk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N logo.nologo quiet noswap logleve l=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-ev ent mountall
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 349104K/376832K available (5202K kernel code, 229K rwdata , 1528K rodata, 140K init, 365K bss, 11344K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd7800000 - 0xff000000 ( 632 MB)
lowmem : 0xc0000000 - 0xd7000000 ( 368 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc069ad50 (6732 kB)
.init : 0xc069b000 - 0xc06be000 ( 140 kB)
.data : 0xc06be000 - 0xc06f75d0 ( 230 kB)
.bss : 0xc06f75d0 - 0xc0752c20 ( 366 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:522
[ 0.000000] clocksource stc: mask: 0xffffffff max_cycles: 0xffffffff, max_idl e_ns: 1911260446275 ns
[ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2 147483647500ns
[ 0.000042] Switching to timer-based delay loop, resolution 1000ns
[ 0.000270] Console: colour dummy device 80x30
[ 0.000428] console [tty1] enabled
[ 0.000447] Calibrating delay loop (skipped), value calculated using timer fr equency.. 2.00 BogoMIPS (lpj=2000)
[ 0.000464] pid_max: default: 32768 minimum: 301
[ 0.000594] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000613] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001359] Initializing cgroup subsys memory
[ 0.001396] Initializing cgroup subsys devices
[ 0.001418] Initializing cgroup subsys net_cls
[ 0.001434] Initializing cgroup subsys perf_event
[ 0.001471] CPU: Testing write buffer coherency: ok
[ 0.001806] Setting up static identity map for 0x81c0 - 0x81f8
[ 0.003204] devtmpfs: initialized
[ 0.011711] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.011979] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max _idle_ns: 3822520892550000 ns
[ 0.014003] xor: measuring software checksum speed
[ 0.032333] arm4regs : 1168.000 MB/sec
[ 0.052386] 8regs : 564.000 MB/sec
[ 0.072442] 32regs : 564.000 MB/sec
[ 0.072455] xor: using function: arm4regs (1168.000 MB/sec)
[ 0.072657] pinctrl core: initialized pinctrl subsystem
[ 0.073396] NET: Registered protocol family 16
[ 0.078792] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.080232] bcm2708.uart_clock = 3000000
[ 0.084153] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.084172] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.084308] Serial: AMBA PL011 UART driver
[ 0.084514] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2
[ 0.085051] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.147779] raid6: int32x1 gen() 58 MB/s
[ 0.181594] raid6: int32x1 xor() 44 MB/s
[ 0.215491] raid6: int32x2 gen() 93 MB/s
[ 0.249907] raid6: int32x2 xor() 60 MB/s
[ 0.283901] raid6: int32x4 gen() 109 MB/s
[ 0.318116] raid6: int32x4 xor() 79 MB/s
[ 0.352512] raid6: int32x8 gen() 121 MB/s
[ 0.386476] raid6: int32x8 xor() 75 MB/s
[ 0.386489] raid6: using algorithm int32x8 gen() 121 MB/s
[ 0.386497] raid6: .... xor() 75 MB/s, rmw enabled
[ 0.386504] raid6: using intx1 recovery algorithm
[ 0.386881] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f200700 0, dmachans=0xf35
[ 0.386917] bcm2708-dmaengine 20007000.dma: Initialized 7 DMA channels (+ 1 l egacy)
[ 0.387505] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver
[ 0.387523] bcm2708-dmaengine 20007000.dma: dma_debug:0
[ 0.388195] SCSI subsystem initialized
[ 0.388446] usbcore: registered new interface driver usbfs
[ 0.388606] usbcore: registered new interface driver hub
[ 0.388726] usbcore: registered new device driver usb
[ 0.389444] raspberrypi-firmware soc:firmware: Attached to firmware from 2015 -10-11 16:21
[ 0.416961] Switched to clocksource stc
[ 0.428299] NET: Registered protocol family 2
[ 0.429496] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.429576] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.429638] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.429719] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.429745] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.430017] NET: Registered protocol family 1
[ 0.430427] RPC: Registered named UNIX socket transport module.
[ 0.430445] RPC: Registered udp transport module.
[ 0.430453] RPC: Registered tcp transport module.
[ 0.430460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.431900] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters ava ilable
[ 0.432869] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.442479] VFS: Disk quotas dquot_6.6.0
[ 0.442720] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.445410] NFS: Registering the id_resolver key type
[ 0.445485] Key type id_resolver registered
[ 0.445497] Key type id_legacy registered
[ 0.445534] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.449932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51)
[ 0.449968] io scheduler noop registered
[ 0.449986] io scheduler deadline registered
[ 0.450056] io scheduler cfq registered (default)
[ 0.452053] BCM2708FB: allocated DMA memory 56400000
[ 0.452106] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.474452] Console: switching to colour frame buffer device 240x67
[ 0.493263] vc-cma: Videocore CMA driver
[ 0.493283] vc-cma: vc_cma_base = 0x00000000
[ 0.493293] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.493300] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.493566] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000 000(512 MiB)
[ 0.495158] vchiq: vchiq_init_state: slot_zero = 0xd6480000, is_master = 0
[ 0.498525] usbcore: registered new interface driver smsc95xx
[ 0.498638] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.698925] Core Release: 2.80a
[ 0.699008] Setting default values for core params
[ 0.699050] Finished setting default values for core params
[ 0.899219] Using Buffer DMA mode
[ 0.899239] Periodic Transfer Interrupt Enhancement - disabled
[ 0.899248] Multiprocessor Interrupt Enhancement - disabled
[ 0.899256] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.899321] Dedicated Tx FIFOs mode
[ 0.899727] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd64 14000 dma = 0x56414000 len=9024
[ 0.899758] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[ 0.899782] dwc_otg: Microframe scheduler enabled
[ 0.899839] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03b9884
[ 0.899853] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03b9b0c length 36
[ 0.899877] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd7812000
[ 0.899923] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.899974] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.900025] dwc_otg 20980000.usb: irq 32, io mem 0x00000000
[ 0.900058] Init: Port Power? op_state=1
[ 0.900067] Init: Power Port (0)
[ 0.900299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.900317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.900329] usb usb1: Product: DWC OTG Controller
[ 0.900340] usb usb1: Manufacturer: Linux 4.1.10+ dwc_otg_hcd
[ 0.900351] usb usb1: SerialNumber: 20980000.usb
[ 0.901237] hub 1-0:1.0: USB hub found
[ 0.901306] hub 1-0:1.0: 1 port detected
[ 0.901801] dwc_otg: FIQ enabled
[ 0.901815] dwc_otg: NAK holdoff enabled
[ 0.901823] dwc_otg: FIQ split-transaction FSM enabled
[ 0.901886] Module dwc_common_port init
[ 0.902292] usbcore: registered new interface driver usb-storage
[ 0.902633] mousedev: PS/2 mouse device common for all mice
[ 0.903679] bcm2835-cpufreq: min=700000 max=840000
[ 0.904009] sdhci: Secure Digital Host Controller Interface driver
[ 0.904025] sdhci: Copyright© Pierre Ossman
[ 0.904356] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.904373] mmc-bcm2835 20300000.mmc: DMA channels allocated
[ 0.927299] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.927449] hidraw: raw HID events driver © Jiri Kosina
[ 0.927770] usbcore: registered new interface driver usbhid
[ 0.927782] usbhid: USB HID core driver
[ 0.928150] NET: Registered protocol family 17
[ 0.928330] Key type dns_resolver registered
[ 0.947103] Btrfs loaded
[ 0.947314] vc-sm: Videocore shared memory driver
[ 0.947336] [vc_sm_connected_init]: start
[ 0.951357] [vc_sm_connected_init]: end - returning 0
[ 0.952915] Waiting for root device /dev/mmcblk0p2...
[ 0.983655] mmc0: host does not support reading read-only switch, assuming wr ite-enable
[ 0.988208] mmc0: new high speed SDHC card at address aaaa
[ 0.988686] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
[ 0.990243] mmcblk0: p1 p2 p3
[ 1.054396] BTRFS: device label xbian devid 1 transid 14323 /dev/root
[ 1.056676] BTRFS info (device mmcblk0p2): enabling auto defrag
[ 1.056725] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 1.056737] BTRFS: has skinny extents
[ 1.101204] Indeed it is in host mode hprt0 = 00021501
[ 1.164455] BTRFS: detected SSD devices, enabling SSD mode
[ 1.176456] VFS: Mounted root (btrfs filesystem) readonly on device 0:14.
[ 1.179115] devtmpfs: mounted
[ 1.179662] Freeing unused kernel memory: 140K (c069b000 - c06be000)
[ 1.265039] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.265223] Indeed it is in host mode hprt0 = 00001101
[ 1.445859] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.445886] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.446781] hub 1-1:1.0: USB hub found
[ 1.446907] hub 1-1:1.0: 5 ports detected
[ 1.723480] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.811504] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.811532] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 1.814490] smsc95xx v1.0.4
[ 1.833132] random: init urandom read with 79 bits of entropy available
[ 1.860538] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:30:cb:bc
[ 1.937094] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 2.031215] usb 1-1.3: New USB device found, idVendor=2001, idProduct=3307
[ 2.031242] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[ 2.031255] usb 1-1.3: Product: 802.11n WLAN Adapter
[ 2.031267] usb 1-1.3: Manufacturer: Realtek
[ 2.031280] usb 1-1.3: SerialNumber: 00e04c000001
[ 2.884517] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 5.753057] random: nonblocking pool is initialized
[ 7.244343] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 7.271701] init: xbian-failaccess main process (206) killed by TERM signal
[ 10.486074] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 17.610468] init: failsafe main process (74) killed by TERM signal
[ 19.217935] init: rpcbind main process (877) terminated with status 1
[ 19.218288] init: rpcbind main process ended, respawning
[ 23.658701] systemd-udevd[1069]: starting version 215
[ 24.197820] bcm2708_rng_init=d87fe000
[ 25.893187] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x202 00000
[ 27.715300] usbcore: registered new interface driver rtl8192cu
[ 30.401143] cfg80211: Calling CRDA to update world regulatory domain
[ 33.555090] cfg80211: Calling CRDA to update world regulatory domain
[ 36.707825] cfg80211: Calling CRDA to update world regulatory domain
[ 39.859104] cfg80211: Calling CRDA to update world regulatory domain
[ 43.011106] cfg80211: Calling CRDA to update world regulatory domain
[ 44.743577] init: ssh main process (1574) terminated with status 255
[ 44.743937] init: ssh main process ended, respawning
[ 46.163274] cfg80211: Calling CRDA to update world regulatory domain
[ 49.315032] cfg80211: Calling CRDA to update world regulatory domain
[ 52.467206] cfg80211: Calling CRDA to update world regulatory domain
[ 55.621112] cfg80211: Calling CRDA to update world regulatory domain
[ 58.775837] cfg80211: Calling CRDA to update world regulatory domain
[ 61.923101] cfg80211: Calling CRDA to update world regulatory domain
[ 65.135629] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 69.988993] sched: RT throttling activated
[ 74.738229] init: wait-for-state (xbmcxbmc-loaded) main process (1507) killed by TERM signal
[ 105.763460] Bluetooth: Core ver 2.20
[ 105.763667] NET: Registered protocol family 31
[ 105.763683] Bluetooth: HCI device and connection manager initialized
[ 105.769187] Bluetooth: HCI socket layer initialized
[ 105.769229] Bluetooth: L2CAP socket layer initialized
[ 105.769299] Bluetooth: SCO socket layer initialized
[ 109.995298] Bluetooth: RFCOMM TTY layer initialized
[ 109.995361] Bluetooth: RFCOMM socket layer initialized
[ 109.995457] Bluetooth: RFCOMM ver 1.11
[ 142.515927] init: wait-for-state (zram-swapxbmc-done) main process (1250) ter minated with status 100
[ 158.210876] Adding 250876k swap on /dev/mmcblk0p3. Priority:0 extents:1 acro ss:250876k SSFS
[ 224.576237] init: xbmc main process (1484) killed by TERM signal
[ 243.609966] systemd-logind[3594]: New seat seat0.
[ 243.806163] systemd-logind[3594]: Failed to start user service: Unknown unit: user@1000.service
[ 243.878629] systemd-logind[3594]: New session c1 of user xbian.

Quote:xbian@xbian ~ $ tail .xbmc/temp/kodi.log
19:08:17 215.896179 T:2991584176 NOTICE: CAESinkPi:AddPackets Underrun (delay:0.00 frames:2205)
19:08:21 219.885727 T:2698769328 NOTICE: Previous line repeats 1 times.
19:08:21 219.886230 T:2698769328 ERROR: CCurlFile::FillBuffer - Failed: Couldn't resolve host name(6)
19:08:21 219.886658 T:2698769328 ERROR: CCurlFile::Open failed with code 0 for http://addons.serveftp.net/addons.xml.md5
19:08:21 219.887222 T:2698769328 ERROR: Open - failed to open source <http://addons.serveftp.net/addons.xml.md5>
19:08:21 219.887787 T:2698769328 ERROR: Failed to fetch checksum for directory listing http://addons.serveftp.net/addons.xml for repository repo.xbian.xbmc.
19:08:23 222.065414 T:2732323760 NOTICE: (False, [])
19:08:24 222.258408 T:2991584176 NOTICE: CAESinkPi:AddPackets Underrun (delay:0.00 frames:2205)
19:08:26 224.247620 T:2885125040 NOTICE: Previous line repeats 2 times.
19:08:26 224.248093 T:2885125040 NOTICE: Thread FileCache start, auto delete: false