+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Peripherals (/forum-27.html)
+--- Thread: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO (/thread-3498.html)
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 8th Apr, 2016 03:30 PM
(8th Apr, 2016 07:20 AM)Skywatch Wrote: Aha.
Here's a guide to help you out.....
In /boot/config.txt add (or edit) the following lines....
Terminal
dtoverlay=hifiberry-dac
dtparam=i2s=on
#dtoverlay=lirc-rpi
hdmi_force_hotplug=1
Then make sure that staging is allowed in /etc/apt/sources.list.d/xbian.list
Then update and then upgrade. DO NOT REBOOT AT THE PROMPT if using xbian-config!
Then make /etc/modprobe.d/xbian.conf look like this.....
Terminal
alias char-major-89 i2c-dev
blacklist snd_bcm2835
blacklist evbug
Then add the line below to /etc/modules.xbian
Terminal
#snd_bcm2835
Now reboot and aplay -l and see what it says.
Let me know which pi, kernel and dac you are using here.
I have tried these steps and I have this card under audio out now and it showing in aplay -l but no sound is passed out.
If I switch back to HDMI in within GUI sound is coming out but switching to ALSA card have nothing
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Skywatch - 8th Apr, 2016 07:50 PM
Good....At least we are getting there!
Next check the output of cat /etc/asound.conf ... It should be
Terminal
pcm.!default {
type hw card 0
}
ctl.!default {
type hw card 0
}
If the file does not exist then create it and add those lines above.
Reboot update and upgrade and double check those two "/etc/module" entries are OK and try again.
IF that still fails then you might need to do ' sudo apt-get install alsa-base alsa-utils ' as I have had times when this mysteriously vanishes so it is worth a try. Reboot and try again.
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 08:10 AM
ok, I have tried this now and is the same situation.I can select DAC as audio out but no sound...
I have tried all the steps mentioned (I believe so
)
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 08:23 AM
sorry, got it working now
It was my mistake and I just forget comment the
Code:
dtoverlay=lirc-rpi
Thanks @Skywatch, good job with this tutorial
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 08:29 AM
now we miss only one thing, make HDMI+Alsa out at the same time
so would not need to switch in between
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Nachteule - 9th Apr, 2016 08:34 AM
Congratulations
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 08:37 AM
so as this is all working fine now, can I make this working on XBian?
http://forum.audiophonics.fr/viewtopic.php?f=4&t=1578
http://forum.audiophonics.fr/viewtopic.php?f=4&t=1492&sid=37b72354b708cb2d3658e2b55ab72f53
@Nachteule what you think? Can you help this noob?
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Nachteule - 9th Apr, 2016 09:17 AM
Looked to the pictures and commands, don't see any reason why not
Btw, don't understand French. Many many years ago I was on business travel in french part of Switzerland (south from Mount Blanc), they did not speak German or English, and I could not speak or understand French. Was funny, or should better say terrible ...
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 02:23 PM
(9th Apr, 2016 09:17 AM)Nachteule Wrote: Btw, don't understand French.
Me neither
But this seems to be the only place with support and information for these products 
Which is a real shame as these products are at high quality in my opinion.
Once this DAC is finish I going to take it to our local high end hifi studio for comparison test
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 02:39 PM
(9th Apr, 2016 09:17 AM)Nachteule Wrote: Looked to the pictures and commands, don't see any reason why not
so I followed this guide and all was good to this point
Code:
cd wiringPi
./buildwhich gives me an error
Code:
root@xbian /home/ft/wiringPi # ./build
wiringPi Build script
=====================
WiringPi Library
sudo: make: command not foundStuck now
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Skywatch - 9th Apr, 2016 06:50 PM
Good to see you got it working - Look forward to the results from the test!
install this...
sudo apt-get install build-essential
Then try wiring pi again.
...and how about that page in English?
https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fforum.audiophonics.fr%2Fviewtopic.php%3Ff%3D4%26t%3D1492%26sid%3D37b72354b708cb2d3658e2b55ab72f53&edit-text=&act=url
@Nachteule
Would that display script run on xbian without problem do you think?
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 08:30 PM
(9th Apr, 2016 06:50 PM)Skywatch Wrote: ...and how about that page in English?
yes, auto translate by google works but that is not a solution, is it
And their official support is, well is not...none existent
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Nachteule - 9th Apr, 2016 09:19 PM
LOL, translations by google, tried it some times, but output always was very very crappy
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - Nachteule - 9th Apr, 2016 09:22 PM
(9th Apr, 2016 06:50 PM)Skywatch Wrote: Would that display script run on xbian without problem do you think?
If you expect problems it will work and vice versa. That's my experience
So, give it a try and see what happens
RE: AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO - rikardo1979 - 9th Apr, 2016 09:35 PM
(9th Apr, 2016 06:50 PM)Skywatch Wrote: Good to see you got it working - Look forward to the results from the test!
install this...
sudo apt-get install build-essential
this did not go very smooth I believe
Code:
root@xbian ~ # sudo apt-get install build-essential
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
liblockdev1
Use 'apt-get autoremove' to remove it.
The following extra packages will be installed:
bzip2 dpkg-dev g++ g++-4.9 libc-dev-bin libc6-dev libdpkg-perl
libstdc++-4.9-dev libtimedate-perl linux-libc-dev make
Suggested packages:
bzip2-doc debian-keyring gcc-4.9-doc libstdc++6-4.9-dbg glibc-doc
libstdc++-4.9-doc make-doc
Recommended packages:
fakeroot libalgorithm-merge-perl manpages-dev libfile-fcntllock-perl
The following NEW packages will be installed:
build-essential bzip2 dpkg-dev g++ g++-4.9 libc-dev-bin libc6-dev
libdpkg-perl libstdc++-4.9-dev libtimedate-perl linux-libc-dev make
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.8 MB of archives.
After this operation, 49.2 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://www.mirrorservice.org/sites/apt.xbian.org/ staging/rpi2-jessie linux-libc-dev armhf 4.4.6-1458753791 [790 kB]
Get:2 http://http.debian.net/debian/ jessie/main bzip2 armhf 1.0.6-7+b3 [45.3 kB]
Get:3 http://http.debian.net/debian/ jessie/main libc-dev-bin armhf 2.19-18+deb8u4 [231 kB]
Get:4 http://http.debian.net/debian/ jessie/main libc6-dev armhf 2.19-18+deb8u4 [1,748 kB]
Get:5 http://http.debian.net/debian/ jessie/main libstdc++-4.9-dev armhf 4.9.2-10 [1,135 kB]
Get:6 http://http.debian.net/debian/ jessie/main g++-4.9 armhf 4.9.2-10 [11.8 MB]
Get:7 http://http.debian.net/debian/ jessie/main g++ armhf 4:4.9.2-2 [1,510 B]
Get:8 http://http.debian.net/debian/ jessie/main make armhf 4.0-8.1 [335 kB]
Get:9 http://http.debian.net/debian/ jessie/main libtimedate-perl all 2.3000-2 [42.2 kB]
Get:10 http://http.debian.net/debian/ jessie/main libdpkg-perl all 1.17.26 [1,072 kB]
Get:11 http://http.debian.net/debian/ jessie/main dpkg-dev all 1.17.26 [1,545 kB]
Get:12 http://http.debian.net/debian/ jessie/main build-essential armhf 11.7 [6,934 B]
Fetched 18.8 MB in 7s (2,546 kB/s)
Create a snapshot of '/run/btrfs-snap/root/@' in '/run/btrfs-snap/root/@btrfs-auto-snap_apt-run-2016-04-09-1109'
Delete subvolume (no-commit): '/run/btrfs-snap/root/@last_good_known'
Create a snapshot of '/run/btrfs-snap/root/@btrfs-auto-snap_apt-run-2016-04-09-1109' in '/run/btrfs-snap/root/@last_good_known'
Delete subvolume (no-commit): '/run/btrfs-snap/root/@btrfs-auto-snap_apt-run-2016-04-09-0425'
@btrfs-auto-snap_apt-run-2016-04-09-1109, 1 created snapshots, 1 destroyed snapshots, 0 warnings.
Selecting previously unselected package bzip2.
(Reading database ... 28780 files and directories currently installed.)
Preparing to unpack .../bzip2_1.0.6-7+b3_armhf.deb ...
Unpacking bzip2 (1.0.6-7+b3) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../libc-dev-bin_2.19-18+deb8u4_armhf.deb ...
Unpacking libc-dev-bin (2.19-18+deb8u4) ...
Selecting previously unselected package linux-libc-dev:armhf.
Preparing to unpack .../linux-libc-dev_4.4.6-1458753791_armhf.deb ...
Unpacking linux-libc-dev:armhf (4.4.6-1458753791) ...
Selecting previously unselected package libc6-dev:armhf.
Preparing to unpack .../libc6-dev_2.19-18+deb8u4_armhf.deb ...
Unpacking libc6-dev:armhf (2.19-18+deb8u4) ...
Selecting previously unselected package libstdc++-4.9-dev:armhf.
Preparing to unpack .../libstdc++-4.9-dev_4.9.2-10_armhf.deb ...
Unpacking libstdc++-4.9-dev:armhf (4.9.2-10) ...
Selecting previously unselected package g++-4.9.
Preparing to unpack .../g++-4.9_4.9.2-10_armhf.deb ...
Unpacking g++-4.9 (4.9.2-10) ...
dpkg: error processing archive /var/cache/apt/archives/g++-4.9_4.9.2-10_armhf.deb (--unpack):
cannot copy extracted data for './usr/lib/gcc/arm-linux-gnueabihf/4.9/cc1plus' to '/usr/lib/gcc/arm-linux-gnueabihf/4.9/cc1plus.dpkg-new': failed to write (No space left on device)
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Selecting previously unselected package g++.
Preparing to unpack .../g++_4%3a4.9.2-2_armhf.deb ...
Unpacking g++ (4:4.9.2-2) ...
Selecting previously unselected package make.
Preparing to unpack .../make_4.0-8.1_armhf.deb ...
Unpacking make (4.0-8.1) ...
Selecting previously unselected package libtimedate-perl.
Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ...
Unpacking libtimedate-perl (2.3000-2) ...
Selecting previously unselected package libdpkg-perl.
Preparing to unpack .../libdpkg-perl_1.17.26_all.deb ...
Unpacking libdpkg-perl (1.17.26) ...
Selecting previously unselected package dpkg-dev.
Preparing to unpack .../dpkg-dev_1.17.26_all.deb ...
Unpacking dpkg-dev (1.17.26) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../build-essential_11.7_armhf.deb ...
Unpacking build-essential (11.7) ...
Errors were encountered while processing:
/var/cache/apt/archives/g++-4.9_4.9.2-10_armhf.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)