+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Additional Packages (/forum-22.html)
+--- Thread: Network-Manager on XBian (/thread-37.html)
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 12:06 AM
this is the dmesg
Code:
[ 1.346710] sdhci: Copyright(c) Pierre Ossman
[ 1.350769] sdhci: Enable low-latency mode
[ 1.355118] Registered led device: mmc0::
[ 1.391152] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor m's DMA
[ 1.395177] mmc0: BCM2708 SDHC host at 0x20300000 DMA 0 IRQ 16
[ 1.399206] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.405950] usbcore: registered new interface driver usbhid
[ 1.413158] usbhid: USB HID core driver
[ 1.424525] TCP: cubic registered
[ 1.430644] Initializing XFRM netlink socket
[ 1.436870] NET: Registered protocol family 17
[ 1.441221] Key type dns_resolver registered
[ 1.448771] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.453898] registered taskstats version 1
[ 1.458391] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.463077] Waiting for root device /dev/mmcblk0p2...
[ 1.480046] mmc0: new high speed SD card at address 0001
[ 1.484861] mmcblk0: mmc0:0001 00000 1.89 GiB
[ 1.490426] mmcblk0: p1 p2 p3
[ 1.494644] Indeed it is in host mode hprt0 = 00021501
[ 1.670980] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.675216] Indeed it is in host mode hprt0 = 00001101
[ 1.871208] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.875337] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.880184] hub 1-1:1.0: USB hub found
[ 1.884516] hub 1-1:1.0: 3 ports detected
[ 2.161002] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.261305] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.265432] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 2.272549] smsc95xx v1.0.4
[ 2.335356] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b5:a3:c4
[ 2.431055] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 4.191081] EXT4-fs (mmcblk0p2): recovery complete
[ 4.276007] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
[ 4.280547] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.286215] devtmpfs: mounted
[ 4.291491] Freeing init memory: 128K
[ 5.467751] udevd[142]: starting version 175
[ 8.729675] Adding 511996k swap on /dev/mmcblk0p3. Priority:-1 extents:1 acr oss:511996k SS
[ 11.643560] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 12.032807] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 16.197767] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.202601] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.208176] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.213100] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.218520] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.223404] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.228906] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.233889] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.239428] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.244473] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.250189] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.255320] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.260910] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.265882] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.271427] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.276343] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.281834] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.286744] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.292278] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.297242] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.302833] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.307875] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.313445] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.318386] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.324049] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.329056] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.334719] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.339700] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.345209] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.350181] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.355805] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.360783] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.366351] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.371347] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.376964] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.382066] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.394788] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.399909] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.405688] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.410935] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.416687] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.422028] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.427907] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.433154] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.438829] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.444032] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.449679] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.454878] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.460613] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.465798] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.471538] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.476654] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.482346] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.487525] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.496983] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.502208] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.511373] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.516485] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.522291] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.527413] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.533116] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.538247] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.543973] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.549094] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.554870] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.560006] mmc0: DMA IRQ 6 ignored - results were reset
[ 17.511172] usb 1-1.2: device descriptor read/64, error -110
[ 19.407419] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.286295] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4D E1
[ 32.701511] usb 1-1.2: device descriptor read/64, error -110
[ 32.891082] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[ 47.971201] usb 1-1.2: device descriptor read/64, error -110
[ 63.161057] usb 1-1.2: device descriptor read/64, error -110
[ 63.351220] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 68.370958] usb 1-1.2: device descriptor read/8, error -110
[ 73.501028] usb 1-1.2: device descriptor read/8, error -110
[ 73.691110] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 78.711037] usb 1-1.2: device descriptor read/8, error -110
[ 83.841009] usb 1-1.2: device descriptor read/8, error -110
[ 83.951263] hub 1-1:1.0: unable to enumerate USB device on port 2
root@xbian:/home/xbian# echo "" > /home/xbian/.bash_history^C
root@xbian:/home/xbian# [ 16.433154] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.438829] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.444032] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.449679] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.454878] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.460613] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.465798] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.471538] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.476654] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.482346] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.487525] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.496983] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.502208] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.511373] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.516485] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.522291] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.527413] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.533116] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.538247] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.543973] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.549094] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 16.554870] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 16.560006] mmc0: DMA IRQ 6 ignored - results were reset
bash: [: missing `]'
root@xbian:/home/xbian# [ 17.511172] usb 1-1.2: device descriptor read/64, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 19.407419] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
bash: syntax error near unexpected token `('
root@xbian:/home/xbian# [ 20.286295] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4D E1
bash: [: missing `]'
root@xbian:/home/xbian# [ 32.701511] usb 1-1.2: device descriptor read/64, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 32.891082] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
bash: [: missing `]'
root@xbian:/home/xbian# [ 47.971201] usb 1-1.2: device descriptor read/64, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 63.161057] usb 1-1.2: device descriptor read/64, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 63.351220] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
bash: [: missing `]'
root@xbian:/home/xbian# [ 68.370958] usb 1-1.2: device descriptor read/8, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 73.501028] usb 1-1.2: device descriptor read/8, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 73.691110] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
bash: [: missing `]'
root@xbian:/home/xbian# [ 78.711037] usb 1-1.2: device descriptor read/8, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 83.841009] usb 1-1.2: device descriptor read/8, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 83.951263] hub 1-1:1.0: unable to enumerate USB device on port 2
bash: [: missing `]'
root@xbian:/home/xbian#the ipconfig doesnt work
the lsmod is here
Code:
Module size used by
nfsd 258146 2I hope you can help me like you did before
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 12:09 AM
What version of xbian are you running.
And, can you edit your post with a proper dmesg paste (without the bash errors).
It should have been "ifconfig", my mistake.
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 12:13 AM
Hi,
I'm using the latest xbian verion (alpha 3) how can I edit the dmesg?
Do you have teamviewer? It is way easier so you can help me by remote controling my pc
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 12:33 AM
I want to do everything on the forum because then other users can find solutions for previous problems.
Just edit your post so it doesn't show:
Code:
root@xbian:/home/xbian# [ 83.841009] usb 1-1.2: device descriptor read/8, error -110
bash: [: missing `]'
root@xbian:/home/xbian# [ 83.951263] hub 1-1:1.0: unable to enumerate USB device on port 2
bash: [: missing `]'
root@xbian:/home/xbian#Just plain 'dmesg' output. I'm also awaiting your 'ifconfig' output.
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 12:48 AM
Code:
[ 1.346710] sdhci: Copyright(c) Pierre Ossman
[ 1.350769] sdhci: Enable low-latency mode
[ 1.355118] Registered led device: mmc0::
[ 1.391152] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor m's DMA
[ 1.395177] mmc0: BCM2708 SDHC host at 0x20300000 DMA 0 IRQ 16
[ 1.399206] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.405950] usbcore: registered new interface driver usbhid
[ 1.413158] usbhid: USB HID core driver
[ 1.424525] TCP: cubic registered
[ 1.430644] Initializing XFRM netlink socket
[ 1.436870] NET: Registered protocol family 17
[ 1.441221] Key type dns_resolver registered
[ 1.448771] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.453898] registered taskstats version 1
[ 1.458391] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.463077] Waiting for root device /dev/mmcblk0p2...
[ 1.480046] mmc0: new high speed SD card at address 0001
[ 1.484861] mmcblk0: mmc0:0001 00000 1.89 GiB
[ 1.490426] mmcblk0: p1 p2 p3
[ 1.494644] Indeed it is in host mode hprt0 = 00021501
[ 1.670980] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.675216] Indeed it is in host mode hprt0 = 00001101
[ 1.871208] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.875337] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.880184] hub 1-1:1.0: USB hub found
[ 1.884516] hub 1-1:1.0: 3 ports detected
[ 2.161002] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.261305] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.265432] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 2.272549] smsc95xx v1.0.4
[ 2.335356] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b5:a3:c4
[ 2.431055] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 4.191081] EXT4-fs (mmcblk0p2): recovery complete
[ 4.276007] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
[ 4.280547] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.286215] devtmpfs: mounted
[ 4.291491] Freeing init memory: 128K
[ 5.467751] udevd[142]: starting version 175
[ 8.729675] Adding 511996k swap on /dev/mmcblk0p3. Priority:-1 extents:1 acr oss:511996k SS
[ 11.643560] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 12.032807] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 16.197767] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.202601] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.208176] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.213100] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.218520] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.223404] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.228906] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.233889] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.239428] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.244473] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.250189] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.255320] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.260910] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.265882] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.271427] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.276343] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.281834] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.286744] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.292278] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.297242] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.302833] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.307875] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.313445] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.318386] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.324049] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.329056] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.334719] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.339700] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.345209] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.350181] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.355805] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.360783] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.366351] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.371347] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.376964] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.382066] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.394788] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.399909] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.405688] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.410935] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.416687] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.422028] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.427907] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.433154] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.438829] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.444032] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.449679] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.454878] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.460613] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.465798] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.471538] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.476654] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.482346] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.487525] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.496983] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.502208] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.511373] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.516485] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.522291] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.527413] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.533116] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.538247] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.543973] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.549094] mmc0: DMA IRQ 6 ignored - results were reset
[ 16.554870] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin g it
[ 16.560006] mmc0: DMA IRQ 6 ignored - results were reset
[ 17.511172] usb 1-1.2: device descriptor read/64, error -110
[ 19.407419] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.286295] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4D E1
[ 32.701511] usb 1-1.2: device descriptor read/64, error -110
[ 32.891082] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[ 47.971201] usb 1-1.2: device descriptor read/64, error -110
[ 63.161057] usb 1-1.2: device descriptor read/64, error -110
[ 63.351220] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 68.370958] usb 1-1.2: device descriptor read/8, error -110
[ 73.501028] usb 1-1.2: device descriptor read/8, error -110
[ 73.691110] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 78.711037] usb 1-1.2: device descriptor read/8, error -110
[ 83.841009] usb 1-1.2: device descriptor read/8, error -110
[ 83.951263] hub 1-1:1.0: unable to enumerate USB device on port 2
root@xbian:/home/xbian# echo "" > /home/xbian/.bash_history^C
root@xbian:/home/xbian# [ 16.433154] mmc0: DMA IRQ 6 ignored - results were resetwhen i try to use the ipconfig command I keep getting command not found
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 12:54 AM
(15th Dec, 2012 12:09 AM)CurlyMo Wrote: It should have been "ifconfig", my mistake.
Can you start by updating the kernel:
Code:
sudo apt-get install xbian-package-kernel3.6.9
sudo rebootRE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 12:57 AM
Code:
eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:a3:c4
inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31287 errors:0 dropped:0 overruns:0 frame:0
TX packets:21497 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29725772 (28.3 MiB) TX bytes:2091010 (1.9 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1200 (1.1 KiB) TX bytes:1200 (1.1 KiB)as you can see my wlan adater is not recognized
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 01:00 AM
Awaiting the new dmesg after a kernel update.
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 01:33 AM
Code:
xbian@xbian:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.9+ (root@ubuntu) (gcc version 4.7.3 20121001 (prerelease) (crosstool-NG 1.17.0) ) #2 PREEMPT Wed Dec 5 22:13:44 CET 2012
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 105472
[ 0.000000] free_area_init_node: node 0, pgdat c0567818, node_mem_map c0611000
[ 0.000000] Normal zone: 824 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 104648 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 104648
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=768 bcm2708.boardrev=0xe bcm2708.serial=0xaab5a3c4 smsc95xx.macaddr=B8:27:EB:B5:A3:C4 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x19c00000 vc_mem.mem_size=0x20000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 843776 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 412MB = 412MB total
[ 0.000000] Memory: 411104k/411104k available, 10784k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xda000000 - 0xff000000 ( 592 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd9c00000 ( 412 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc050fb88 (5151 kB)
[ 0.000000] .init : 0xc0510000 - 0xc0530e84 ( 132 kB)
[ 0.000000] .data : 0xc0532000 - 0xc0568340 ( 217 kB)
[ 0.000000] .bss : 0xc0568364 - 0xc0610a6c ( 674 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] timer_set_mode: unhandled mode:1
[ 0.000000] timer_set_mode: unhandled mode:3
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001103] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060155] pid_max: default: 32768 minimum: 301
[ 0.060489] Mount-cache hash table entries: 512
[ 0.061299] Initializing cgroup subsys cpuacct
[ 0.061359] Initializing cgroup subsys memory
[ 0.061440] Initializing cgroup subsys devices
[ 0.061476] Initializing cgroup subsys freezer
[ 0.061508] Initializing cgroup subsys blkio
[ 0.061617] CPU: Testing write buffer coherency: ok
[ 0.061970] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.062119] Setting up static identity map for 0x3aee38 - 0x3aee94
[ 0.063768] devtmpfs: initialized
[ 0.072682] NET: Registered protocol family 16
[ 0.075396] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.076545] bcm2708.uart_clock = 0
[ 0.078052] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.078108] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.078146] mailbox: Broadcom VideoCore Mailbox driver
[ 0.078247] bcm2708_vcio: mailbox at f200b880
[ 0.078350] bcm_power: Broadcom power driver
[ 0.078391] bcm_power_open() -> 0
[ 0.078418] bcm_power_request(0, 8)
[ 0.579102] bcm_mailbox_read -> 00000080, 0
[ 0.579142] bcm_power_request -> 0
[ 0.579168] Serial: AMBA PL011 UART driver
[ 0.579331] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.599255] bio: create slab <bio-0> at 0
[ 0.600189] SCSI subsystem initialized
[ 0.600523] usbcore: registered new interface driver usbfs
[ 0.600680] usbcore: registered new interface driver hub
[ 0.600992] usbcore: registered new device driver usb
[ 0.602364] Switching to clocksource stc
[ 0.602629] FS-Cache: Loaded
[ 0.602928] CacheFiles: Loaded
[ 0.615972] NET: Registered protocol family 2
[ 0.616857] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.617641] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.618088] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.618187] TCP: reno registered
[ 0.618238] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.618308] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.618697] NET: Registered protocol family 1
[ 0.619415] RPC: Registered named UNIX socket transport module.
[ 0.619476] RPC: Registered udp transport module.
[ 0.619508] RPC: Registered tcp transport module.
[ 0.619538] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.620221] bcm2708_dma: DMA manager at f2007000
[ 0.620355] bcm2708_gpio: bcm2708_gpio_probe c053fe68
[ 0.620751] vc-mem: phys_addr:0x00000000 mem_base=0x19c00000 mem_size:0x20000000(512 MiB)
[ 0.621765] audit: initializing netlink socket (disabled)
[ 0.621890] type=2000 audit(0.600:1): initialized
[ 0.742807] VFS: Disk quotas dquot_6.5.2
[ 0.742961] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.743441] FS-Cache: Netfs 'nfs' registered for caching
[ 0.743882] NFS: Registering the id_resolver key type
[ 0.744013] Key type id_resolver registered
[ 0.744051] Key type id_legacy registered
[ 0.744437] msgmni has been set to 802
[ 0.746608] io scheduler noop registered
[ 0.746670] io scheduler deadline registered
[ 0.746728] io scheduler cfq registered (default)
[ 0.752022] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.752063] crc32: self tests passed, processed 225944 bytes in 2575000 nsec
[ 0.754193] crc32c: CRC_LE_BITS = 64
[ 0.754236] crc32c: self tests passed, processed 225944 bytes in 929000 nsec
[ 0.786629] Console: switching to colour frame buffer device 160x48
[ 0.810083] brd: module loaded
[ 0.815632] loop: module loaded
[ 0.816196] vcos: [1]: vchiq_init_state: slot_zero = 0xda004000, is_master = 0
[ 0.816942] vcos: [1]: vchiq_init_state: called
[ 0.817773] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[ 0.818439] usbcore: registered new interface driver smsc95xx
[ 0.818833] usbcore: registered new interface driver cdc_ncm
[ 0.819028] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.024427] Core Release: 2.80a
[ 1.024562] Setting default values for core params
[ 1.024737] Finished setting default values for core params
[ 1.229992] Using Buffer DMA mode
[ 1.230120] Periodic Transfer Interrupt Enhancement - disabled
[ 1.234799] Multiprocessor Interrupt Enhancement - disabled
[ 1.239422] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.244060] Dedicated Tx FIFOs mode
[ 1.248863] dwc_otg: Microframe scheduler enabled
[ 1.248934] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.253655] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.258351] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.263119] Init: Port Power? op_state=1
[ 1.267759] Init: Power Port (0)
[ 1.272583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.277264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281967] usb usb1: Product: DWC OTG Controller
[ 1.286698] usb usb1: Manufacturer: Linux 3.6.9+ dwc_otg_hcd
[ 1.291301] usb usb1: SerialNumber: bcm2708_usb
[ 1.296816] hub 1-0:1.0: USB hub found
[ 1.301410] hub 1-0:1.0: 1 port detected
[ 1.306407] dwc_otg: FIQ enabled
[ 1.306430] dwc_otg: NAK holdoff enabled
[ 1.306452] Module dwc_common_port init
[ 1.306852] usbcore: registered new interface driver uas
[ 1.311340] Initializing USB Mass Storage driver...
[ 1.316171] usbcore: registered new interface driver usb-storage
[ 1.320661] USB Mass Storage support registered.
[ 1.325457] usbcore: registered new interface driver libusual
[ 1.330470] mousedev: PS/2 mouse device common for all mice
[ 1.335964] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[ 1.336269] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
[ 1.342059] cpuidle: using governor ladder
[ 1.349985] cpuidle: using governor menu
[ 1.354229] sdhci: Secure Digital Host Controller Interface driver
[ 1.358220] sdhci: Copyright(c) Pierre Ossman
[ 1.362314] sdhci: Enable low-latency mode
[ 1.366643] Registered led device: mmc0::
[ 1.402713] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.406764] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.410823] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.417583] usbcore: registered new interface driver usbhid
[ 1.424786] usbhid: USB HID core driver
[ 1.436183] TCP: cubic registered
[ 1.442296] Initializing XFRM netlink socket
[ 1.448550] NET: Registered protocol family 17
[ 1.452925] Key type dns_resolver registered
[ 1.460513] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.465663] registered taskstats version 1
[ 1.470168] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.474878] Waiting for root device /dev/mmcblk0p2...
[ 1.495094] mmc0: could read SD Status register (SSR) at the 2th attempt
[ 1.502672] Indeed it is in host mode hprt0 = 00021501
[ 1.512737] mmc0: new high speed SD card at address 0001
[ 1.522825] mmcblk0: mmc0:0001 00000 1.89 GiB
[ 1.533550] mmcblk0: p1 p2 p3
[ 1.599300] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.603766] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.614472] devtmpfs: mounted
[ 1.619437] Freeing init memory: 128K
[ 1.692540] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.696954] Indeed it is in host mode hprt0 = 00001101
[ 1.902850] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.907150] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.912225] hub 1-1:1.0: USB hub found
[ 1.917682] hub 1-1:1.0: 3 ports detected
[ 2.202838] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.313083] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.317425] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.330382] smsc95xx v1.0.4
[ 2.396999] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b5:a3:c4
[ 2.482744] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.880808] udevd[142]: starting version 175
[ 6.167813] Adding 511996k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:511996k SS
[ 8.842593] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.259314] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.786377] bcm2835 ALSA card created!
[ 9.796887] bcm2835 ALSA chip created!
[ 9.806004] bcm2835 ALSA chip created!
[ 9.816209] bcm2835 ALSA chip created!
[ 9.825107] bcm2835 ALSA chip created!
[ 9.835664] bcm2835 ALSA chip created!
[ 9.845802] bcm2835 ALSA chip created!
[ 9.853865] bcm2835 ALSA chip created!
[ 16.253017] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.659640] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ 17.572775] usb 1-1.2: device descriptor read/64, error -110
[ 32.762869] usb 1-1.2: device descriptor read/64, error -110
[ 32.952763] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[ 48.032752] usb 1-1.2: device descriptor read/64, error -110
[ 63.222766] usb 1-1.2: device descriptor read/64, error -110
[ 63.412780] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 68.432613] usb 1-1.2: device descriptor read/8, error -110
[ 73.562640] usb 1-1.2: device descriptor read/8, error -110
[ 73.752792] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 78.772614] usb 1-1.2: device descriptor read/8, error -110
[ 83.902631] usb 1-1.2: device descriptor read/8, error -110
[ 84.012694] hub 1-1:1.0: unable to enumerate USB device on port 2RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 01:38 AM
Are you on a powered usb hub? Or is your PSU at least 1A? The usb devices already fail at kernel level..., so it needs to a hardware problem.
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 01:41 AM
Hi,
I even tried it with a powered hub. I don't think its a power problem. It worked on Raspbmc without a powered usb hub.
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 01:44 AM
Owk, can you try kernel 3.2.27?
Code:
sudo apt-get -o Dpkg::Options::="--force-all" install xbian-package-kernel3.2.27
sudo rebootCompare this peace of output to mine:
Code:
[ 73.752792] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 78.772614] usb 1-1.2: device descriptor read/8, error -110
[ 83.902631] usb 1-1.2: device descriptor read/8, error -110Code:
[ 2.412759] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.514290] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176
[ 2.517631] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.520964] usb 1-1.2: Manufacturer: Realtek
[ 2.532631] usb 1-1.2: SerialNumber: 00e04c000001RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 01:52 AM
Code:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.27+ (root@ubuntu) (gcc version 4.7.3 20121001 (prerelease) (crosstool-NG 1.17.0) ) #1 PREEMPT Wed Dec 5 19:04:23 CET 2012
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 105472
[ 0.000000] free_area_init_node: node 0, pgdat c050fb28, node_mem_map c05b8000
[ 0.000000] Normal zone: 824 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 104648 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 104648
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=768 bcm2708.boardrev=0xe bcm2708.serial=0xaab5a3c4 smsc95xx.macaddr=B8:27:EB:B5:A3:C4 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x19c00000 vc_mem.mem_size=0x20000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 412MB = 412MB total
[ 0.000000] Memory: 412288k/412288k available, 9600k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xda000000 - 0xe8000000 ( 224 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd9c00000 ( 412 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04c2e98 (4844 kB)
[ 0.000000] .init : 0xc04c3000 - 0xc04e2b10 ( 127 kB)
[ 0.000000] .data : 0xc04e4000 - 0xc05101c0 ( 177 kB)
[ 0.000000] .bss : 0xc05101e4 - 0xc05b7128 ( 668 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] timer_set_mode: unhandled mode:1
[ 0.000000] timer_set_mode: unhandled mode:3
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000931] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060152] pid_max: default: 32768 minimum: 301
[ 0.060636] Mount-cache hash table entries: 512
[ 0.061133] Initializing cgroup subsys cpuacct
[ 0.061228] Initializing cgroup subsys devices
[ 0.061263] Initializing cgroup subsys freezer
[ 0.061293] Initializing cgroup subsys blkio
[ 0.061438] CPU: Testing write buffer coherency: ok
[ 0.061777] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.062996] devtmpfs: initialized
[ 0.073317] NET: Registered protocol family 16
[ 0.074015] bcm2708.uart_clock = 0
[ 0.075655] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.075709] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.075746] mailbox: Broadcom VideoCore Mailbox driver
[ 0.075853] bcm2708_vcio: mailbox at f200b880
[ 0.075956] bcm_power: Broadcom power driver
[ 0.075995] bcm_power_open() -> 0
[ 0.076021] bcm_power_request(0, 8)
[ 0.576700] bcm_mailbox_read -> 00000080, 0
[ 0.576740] bcm_power_request -> 0
[ 0.576766] Serial: AMBA PL011 UART driver
[ 0.576927] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.598941] bio: create slab <bio-0> at 0
[ 0.600099] SCSI subsystem initialized
[ 0.600366] usbcore: registered new interface driver usbfs
[ 0.600599] usbcore: registered new interface driver hub
[ 0.600917] usbcore: registered new device driver usb
[ 0.601843] Switching to clocksource stc
[ 0.602184] FS-Cache: Loaded
[ 0.602506] CacheFiles: Loaded
[ 0.616261] NET: Registered protocol family 2
[ 0.616754] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.617922] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.618711] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.619152] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.619193] TCP reno registered
[ 0.619231] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.619300] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.619836] NET: Registered protocol family 1
[ 0.620650] RPC: Registered named UNIX socket transport module.
[ 0.620717] RPC: Registered udp transport module.
[ 0.620748] RPC: Registered tcp transport module.
[ 0.620777] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.621097] bcm2708_dma: DMA manager at da008000
[ 0.621241] bcm2708_gpio: bcm2708_gpio_probe c04ebc18
[ 0.621670] vc-mem: phys_addr:0x00000000 mem_base=0x19c00000 mem_size:0x20000000(512 MiB)
[ 0.622866] audit: initializing netlink socket (disabled)
[ 0.622976] type=2000 audit(0.620:1): initialized
[ 0.734981] VFS: Disk quotas dquot_6.5.2
[ 0.735213] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.736209] FS-Cache: Netfs 'nfs' registered for caching
[ 0.737205] msgmni has been set to 805
[ 0.739242] io scheduler noop registered
[ 0.739308] io scheduler deadline registered
[ 0.739486] io scheduler cfq registered (default)
[ 0.760659] Console: switching to colour frame buffer device 160x48
[ 0.783864] brd: module loaded
[ 0.789011] loop: module loaded
[ 0.789943] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[ 0.790357] vcos: [1]: vchiq_init_state: called
[ 0.791157] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[ 0.792085] usbcore: registered new interface driver smsc95xx
[ 0.792359] cdc_ncm: 04-Aug-2011
[ 0.792610] usbcore: registered new interface driver cdc_ncm
[ 0.792793] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.998112] Core Release: 2.80a
[ 0.998259] Setting default values for core params
[ 0.998425] Finished setting default values for core params
[ 1.203753] Using Buffer DMA mode
[ 1.208460] Periodic Transfer Interrupt Enhancement - disabled
[ 1.213335] Multiprocessor Interrupt Enhancement - disabled
[ 1.218161] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.223022] Dedicated Tx FIFOs mode
[ 1.227982] dwc_otg: Microframe scheduler enabled
[ 1.228040] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.232913] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.237719] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.242540] Init: Port Power? op_state=1
[ 1.247144] Init: Power Port (0)
[ 1.251808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.256571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.261210] usb usb1: Product: DWC OTG Controller
[ 1.265892] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
[ 1.270554] usb usb1: SerialNumber: bcm2708_usb
[ 1.276205] hub 1-0:1.0: USB hub found
[ 1.280911] hub 1-0:1.0: 1 port detected
[ 1.286354] dwc_otg: FIQ enabled
[ 1.286373] dwc_otg: NAK holdoff enabled
[ 1.286394] Module dwc_common_port init
[ 1.286736] usbcore: registered new interface driver uas
[ 1.291406] Initializing USB Mass Storage driver...
[ 1.296406] usbcore: registered new interface driver usb-storage
[ 1.300998] USB Mass Storage support registered.
[ 1.305891] usbcore: registered new interface driver libusual
[ 1.310912] mousedev: PS/2 mouse device common for all mice
[ 1.316502] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[ 1.316788] bcm2835-cpufreq: switching to governor performance
[ 1.321398] bcm2835-cpufreq: switching to governor performance
[ 1.327117] cpuidle: using governor ladder
[ 1.334557] cpuidle: using governor menu
[ 1.338377] sdhci: Secure Digital Host Controller Interface driver
[ 1.342238] sdhci: Copyright(c) Pierre Ossman
[ 1.346102] sdhci: Enable low-latency mode
[ 1.349827] bcm_power_open() -> 1
[ 1.353875] Registered led device: mmc0::
[ 1.355282] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.359156] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.363244] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.367273] Registered led device: led0
[ 1.367613] usbcore: registered new interface driver usbhid
[ 1.371410] usbhid: USB HID core driver
[ 1.376250] TCP cubic registered
[ 1.379971] Initializing XFRM netlink socket
[ 1.384975] NET: Registered protocol family 17
[ 1.388762] Registering the dns_resolver key type
[ 1.392620] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.397189] registered taskstats version 1
[ 1.401059] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.407571] Waiting for root device /dev/mmcblk0p2...
[ 1.482061] Indeed it is in host mode hprt0 = 00021501
[ 1.604381] mmc0: could read SD Status register (SSR) at the 10th attempt
[ 1.611829] mmc0: new high speed SD card at address 0001
[ 1.616459] mmcblk0: mmc0:0001 00000 1.89 GiB
[ 1.621736] mmcblk0: p1 p2 p3
[ 1.648956] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.653083] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.664620] devtmpfs: mounted
[ 1.669329] Freeing init memory: 124K
[ 1.702039] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.706743] Indeed it is in host mode hprt0 = 00001101
[ 1.912243] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.916336] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.923322] hub 1-1:1.0: USB hub found
[ 1.927486] hub 1-1:1.0: 3 ports detected
[ 2.212244] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.332743] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.336800] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.344420] smsc95xx v1.0.4
[ 2.407160] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b5:a3:c4
[ 2.492282] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.837073] udevd[137]: starting version 175
[ 5.842248] Adding 511996k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:511996k SS
[ 8.706831] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.093807] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.603949] bcm2835 ALSA card created!
[ 9.608863] bcm2835 ALSA chip created!
[ 9.625640] bcm2835 ALSA chip created!
[ 9.630349] bcm2835 ALSA chip created!
[ 9.641041] bcm2835 ALSA chip created!
[ 9.647829] bcm2835 ALSA chip created!
[ 9.654567] bcm2835 ALSA chip created!
[ 9.661145] bcm2835 ALSA chip created!
[ 15.652777] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.182607] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ 17.572278] usb 1-1.2: device descriptor read/64, error -110
[ 32.762274] usb 1-1.2: device descriptor read/64, error -110
[ 32.952300] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[ 48.032286] usb 1-1.2: device descriptor read/64, error -110
[ 63.222285] usb 1-1.2: device descriptor read/64, error -110
[ 63.412186] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 68.432050] usb 1-1.2: device descriptor read/8, error -110
[ 73.562068] usb 1-1.2: device descriptor read/8, error -110
[ 73.752196] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
xbian@xbian:~#it says still no wifi device available. Is it working on your pi? Can you mabe make an image of your version? Then I can try it on my own pi
RE: Network-Manager on XBian - CurlyMo - 15th Dec, 2012 02:01 AM
Did you try a fresh install?
What chips are these wifi cards based on, realtek?
*You cannot have an image of my Pi, to customized
RE: Network-Manager on XBian - blazinramirez - 15th Dec, 2012 02:03 AM
Hi,
Listen what I did
1 I installed the fresh image
2 I used your commands
so it is a fresh image but doesn't work. What do you mean by to customized?
the only think I'd like to have is a working xbian image with working wireless;p
(15th Dec, 2012 02:03 AM)blazinramirez Wrote: Hi,
Listen what I did
1 I installed the fresh image
2 I used your commands
so it is a fresh image but doesn't work. What do you mean by to customized?
the only think I'd like to have is a working xbian image with working wireless;p
Yeah, it is realtek based. I looked on the forum and these cards are supported without any change in the pi.