Problem: /boot is not mounted automatically

[PROBLEM] /boot is not mounted automatically - Printable Version

+- Forum (http://forum.xbian.org)
+-- Forum: Software (/forum-6.html)
+--- Forum: Installation (/forum-16.html)
+--- Thread: [PROBLEM] /boot is not mounted automatically (/thread-4040.html)

/boot is not mounted automatically - jakenl - 10th Aug, 2019 06:56 AM

the update process, whether using the GUI or the commandline didn't proceed, because of an error in line 11 of /etc/fstab

Code:

#

# Configured /etc/fstab for XBian system

#

none                  /run/user               tmpfs   noauto                                        0        0

none                  /run/shm                tmpfs   noauto                                        0        0

none                  /run/lock               tmpfs   noauto                                        0        0

/dev/root             /xbmc-backup            xbian   subvol=data/@,noatime,rw                      0        0

/dev/root             /home                   xbian   subvol=home/@,noatime,nobootwait,rw           0        0

/dev/root             /lib/modules            xbian   subvol=modules/@,noatime,nobootwait,rw        0        0

/dev/root             /                       xbian   noatime,nobootwait,rw                         0        0

UUID=4D28-F2B5        /boot                   xbian   xbian noatime,rw,private                      0        1

Secondly the update complained that the /boot partition is not available. This is a 'nice' match with the first complaint, since line 11 is about the /boot.
The etc/fstab is identical as before, except that line 11 was at first somewhere in the middle. I don't think that makes a difference.

When I issued the mount command manually, it mounted without issue and I was able to do the sudo apt-get upgrade

Code:

sudo mount UUID=4D28-F2B5 /boot

After a reboot, I can do a cd /boot, but find the folder empty, so it is not mounted again. How can this be? The UUID is correct, I checked that, plus the manual mount operation, using this UUID works as well.

Second, minor, issue is that, while reviewing the kodi.log, I find error lines for every single folder of one of my USB sticks with data that it can't be found:

Code:

2019-08-09 22:35:35.380 T:1587061472 WARNING: Process directory '/media/64GB_ULTRAF/Audio/' does not exist - skipping scan.

When the Kodi GUI is just loaded after the splash screen, I always see this usb-stick mount it's folders. all the data on it, all my audio, works just fine.

In a trial to overcome both problems, I added 'boot_delay=5' to my cmdline.txt to give some time for both USB-sticks to get to life. Unfortunately this doesn't help.

RE: /boot is not mounted automatically - Nachteule - 10th Aug, 2019 08:04 AM

To your first issue:

The entry seems to be garbaged:

Quote:UUID=4D28-F2B5 /boot xbian xbian noatime,rw,private 0 1

Please remove the 2nd "xbian " from /etc/fstab

RE: /boot is not mounted automatically - Nachteule - 10th Aug, 2019 08:07 PM

To your second minor issue:

i don't know what you want to achieve with the kernel parameter 'boot_delay=5', if I look into the kernel parameter documentation,

Code:

boot_delay=     Milliseconds to delay each printk during boot.

                        Values larger than 10 seconds (10000) are changed to

                        no delay (0).

                        Format: integer

this parameter really doesn't make any sense to me

If Kodi is working correctly despite the error message, you can safely ignore it, if not, you could use the user-run.sh script to explicitly wait until the media is mounted

See file /etc/default/xbmc and template of user-run.sh script is in /usr/local/share/doc/xbmc/user-run.sh

For example, this script could look like this:

Code:

#!/bin/sh

echo "-----------------------------------"

echo "$(date) $0 $@"

echo "-----------------------------------"

case $1 in

        preload)                # Invoked by /etc/init/xbmc-preload.conf

                case $2 in

                        start)

                                for i in 1 2 3 4 5 6 7 8 9 10; do

                                        if mountpoint -q /media/64GB_ULTRAF/; then

                                                break

                                        fi

                                        sleep 1

                                done

                                ;;

                        stop)

                                # This should never happen

                                ;;

                esac

                ;;

        xbmc)                   # Invoked by /etc/init/xbmc.conf

                case $2 in

                        start)

                                ;;

                        stop)

                                ;;

                esac

                ;;

        screensaver)            # Invoked by /etc/init/xbmc-screensaver.conf

                case $2 in

                        start)

                                ;;

                        stop)

                                ;;

                esac

                ;;

esac

exit 0

RE: /boot is not mounted automatically - jakenl - 11th Aug, 2019 01:21 AM

(10th Aug, 2019 08:04 AM)Nachteule Wrote: To your first issue:

The entry seems to be garbaged:

Quote:UUID=4D28-F2B5 /boot xbian xbian noatime,rw,private 0 1

Please remove the 2nd "xbian " from /etc/fstab

Yes, this fixed it!

(10th Aug, 2019 08:07 PM)Nachteule Wrote: To your second minor issue:

i don't know what you want to achieve with the kernel parameter 'boot_delay=5', if I look into the kernel parameter documentation,

Code:

boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). Format: integer

this parameter really doesn't make any sense to me

This delay is used to let HDD's spin up and also gives some time for USB drives to initialise.
I was not sure what was meant with the milliseconds, I checked multiple sites and I finally interpreted it as seconds. Anyway, I removed it now altogether.

Quote:If Kodi is working correctly despite the error message, you can safely ignore it, if not, you could use the user-run.sh script to explicitly wait until the media is mounted

See file /etc/default/xbmc and template of user-run.sh script is in /usr/local/share/doc/xbmc/user-run.sh

For example, this script could look like this:

Code:

#!/bin/sh echo "-----------------------------------" echo "$(date) $0 $@" echo "-----------------------------------" case $1 in preload) # Invoked by /etc/init/xbmc-preload.conf case $2 in start) for i in 1 2 3 4 5 6 7 8 9 10; do if mountpoint -q /media/64GB_ULTRAF/; then break fi sleep 1 done ;; stop) # This should never happen ;; esac ;; xbmc) # Invoked by /etc/init/xbmc.conf case $2 in start) ;; stop) ;; esac ;; screensaver) # Invoked by /etc/init/xbmc-screensaver.conf case $2 in start) ;; stop) ;; esac ;; esac exit 0

I checked out both files and I see what it does. However, since it doesn't cause an issue (besides a long log file) I decided not to go for this 'hard coded' solution. Over time I will forget about this trick and when I change USB-sticks, I won't remember this anymore. Thanks for showing this approach!

RE: /boot is not mounted automatically - rezasamir - 12th Jan, 2020 08:54 PM

I have the same issue ,
any suggestion?

RE: /boot is not mounted automatically - Nachteule - 12th Jan, 2020 11:46 PM

(12th Jan, 2020 08:54 PM)rezasamir Wrote: I have the same issue ,
any suggestion?

As long as you do not tell us what you have done or provide us with further information, you cannot be helped