+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Peripherals (/forum-27.html)
+--- Thread: [SOLVED] External HDD power down (/thread-828.html)
External HDD power down - rodrigomendoza - 24th Apr, 2013 12:33 AM
Hello,
I have a B Model connected through 5V @ 1.2A power supply from here and a Western Digital My Passport 1Tb USB 2.0 HDD.
The problem I'm experience is randomly I get this error:
ls: reading directory .: Input/output error
When trying to read a directory from the HDD.
If I do a df -h I see the drive mounted.
If I try to mannually unmount/mount the drive I'll get this error:
xbian@raspberry ~ $ sudo mount -t ntfs-3g /dev/sda1 /media/usb0
Error opening '/dev/sda1': No such device or address
Failed to mount '/dev/sda1': No such device or address
Either the device is missing or it's powered down, or you have
SoftRAID hardware and must use an activated, different device under
/dev/mapper/, (e.g. /dev/mapper/nvidia_eahaabcc1) to mount NTFS.
Please see the 'dmraid' documentation for help.
Can someone help me?
Will a USB Hub with external power solve this issue?
Thanks in advance
A little bit more data:
xbian@raspberry ~ $ lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. LAN9500 Ethernet 10/100 Adapter / SMSC9512/9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 004: ID 1058:071a Western Digital Technologies, Inc. My Passport 1TB
xbian@raspberry ~ $ sudo smartctl -i /dev/sda1
smartctl 5.41 2011-06-09 r3365 [armv6l-linux-3.6.11+] (local build)
Copyright © 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Smartctl open device: /dev/sda1 failed: No such device or address
Re: External HDD power down - f1vefour - 24th Apr, 2013 02:41 PM
Are you certain the drive is not /dev/sdb1
RE: External HDD power down - Fred - 24th Apr, 2013 06:38 PM
The WD Passport drives are meant to be powered through the usb port right? If that's the case, the raspberry pi is probably not able to supply enough power. A externally powered usb hub should solve this, but I have no experience in this because I am using a disk that has it's own external power supply.
RE: External HDD power down - rodrigomendoza - 24th Apr, 2013 09:38 PM
(24th Apr, 2013 02:41 PM)f1vefour Wrote: Are you certain the drive is not /dev/sdb1
Completely sure is /dev/sda1
Thanks
(24th Apr, 2013 06:38 PM)Fred Wrote: The WD Passport drives are meant to be powered through the usb port right? If that's the case, the raspberry pi is probably not able to supply enough power. A externally powered usb hub should solve this, but I have no experience in this because I am using a disk that has it's own external power supply.
Yes it uses power from the same usb that is connected to the RPi. What wonders me the most is that it works for some time and then starts to fail. I don't know if there some kind sleep function on the drive or something like that.
I already place an order for this hub. I'll comment on the results once i get it.
Thanks.
Re: External HDD power down - f1vefour - 24th Apr, 2013 11:15 PM
It definitely needs a hub, it's surprising the pi doesn't shutdown as it's not designed to power external accessories that draw much power.
RE: External HDD power down - rodrigomendoza - 24th Apr, 2013 11:18 PM
(24th Apr, 2013 11:15 PM)f1vefour Wrote: It definitely needs a hub, it's surprising the pi doesn't shutdown as it's not designed to power external accessories that draw much power.
Could it be because of the power supply that is 1.2A?
Thanks.
Re: External HDD power down - f1vefour - 25th Apr, 2013 03:40 AM
The USB ports only supply a certain amount of power regardless of which power supply you're using on the Pi.
I use a 1 amp Pi power supply with a powered USB drive and it works great. The Pi ports can run a flash drive without any issues as I have my root filesystem on an 8 gigabyte PNY Attachè plugged into the other USB port.
RE: External HDD power down - rodrigomendoza - 24th May, 2013 10:20 PM
I finally got the hub and everything works perfect, thank you all.
RE: External HDD power down - sundoo - 3rd Aug, 2013 07:20 AM
Hi ! I have the same issue. The difference is that i've tried 3 different usb drives.
One 3.5" with an external power supply, connected via an USB hub, which is also powered by a 1.5A power supply.
And 2 seagate usb drives 500gb and 1tb, that don't have external power supply, but are connected to the powered USB HUB.
I've tried different combinations:
- only one at a time
- the 3 of them in the same time
The problem is the same. There comes a moment when the drive(s) give(s) I/O error. The worked perfectly for about 3 hours and then, suddenly - the 3 of them at the same time became unavailable with I/O error.
The thing is that when you look into /dev/sd* ... you see sdd, sde, sdf. Like if it'd had been a brief disconnection and reconnection of the 3 drives in the same time.
Any idea ?
RE: External HDD power down - mk01 - 3rd Aug, 2013 07:28 AM
(3rd Aug, 2013 07:20 AM)sundoo Wrote: Hi ! I have the same issue. The difference is that i've tried 3 different usb drives.
Any idea ?
what version of xbian you have? when you look into /boot/cmdline.txt, do you have parameter "nohdparm" or don't ?
RE: External HDD power down - sundoo - 3rd Aug, 2013 07:57 AM
(3rd Aug, 2013 07:28 AM)mk01 Wrote:(3rd Aug, 2013 07:20 AM)sundoo Wrote: Hi ! I have the same issue. The difference is that i've tried 3 different usb drives.
Any idea ?
what version of xbian you have? when you look into /boot/cmdline.txt, do you have parameter "nohdparm" or don't ?
I've installed the 2013-07-26-wheezy-raspbian
And here's the output from cat /boot/cmdline.txt:
pi@raspberrypi ~ $ cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 oot=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Re: RE: External HDD power down - f1vefour - 3rd Aug, 2013 08:03 AM
(3rd Aug, 2013 07:57 AM)sundoo Wrote:(3rd Aug, 2013 07:28 AM)mk01 Wrote:(3rd Aug, 2013 07:20 AM)sundoo Wrote: Hi ! I have the same issue. The difference is that i've tried 3 different usb drives.
Any idea ?
what version of xbian you have? when you look into /boot/cmdline.txt, do you have parameter "nohdparm" or don't ?
I've installed the 2013-07-26-wheezy-raspbian
And here's the output from cat /boot/cmdline.txt:
pi@raspberrypi ~ $ cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 oot=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Your running Raspbian?
RE: External HDD power down - sundoo - 3rd Aug, 2013 08:06 AM
(3rd Aug, 2013 08:03 AM)f1vefour Wrote:(3rd Aug, 2013 07:57 AM)sundoo Wrote:(3rd Aug, 2013 07:28 AM)mk01 Wrote:(3rd Aug, 2013 07:20 AM)sundoo Wrote: Hi ! I have the same issue. The difference is that i've tried 3 different usb drives.
Any idea ?
what version of xbian you have? when you look into /boot/cmdline.txt, do you have parameter "nohdparm" or don't ?
I've installed the 2013-07-26-wheezy-raspbian
And here's the output from cat /boot/cmdline.txt:
pi@raspberrypi ~ $ cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 oot=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Your running Raspbian?
Yes. Sorry. Just realized i'm on the wrong forum. It's just that the problems are so similar. I really don't think that this is a software issue
Re: External HDD power down - f1vefour - 3rd Aug, 2013 08:09 AM
Even though you think it's not software (it certainly could be) you would need to install Xbian so we can provide support.
Your kernel and most everything else is totally different.
RE: External HDD power down - Skywatch - 3rd Aug, 2013 04:18 PM
Try another USB hub.
I had problems with random disconnects and slow network speed. Both were fixed by using a different USB hub (less than £5 delivered off the ebay).
It could also be that the PSU is heating up and dropping the voltage. If you can, test the pi's voltage across TP1 and TP2 on the pi itself. If it slowly drops over a few hours of normal use then you need a better power supply (try and get a quality 2A one, but shop carefully as there is a lot of junk PSU's out there). It should be 5V DC. Anything below 4.8V would be entering the problem zone. The usb power should also be 5V, but might be trickier to test under load (use an old cable and look on the net for diagrams of where/how to do this).
And FWIW my old usb drive never powered down, it was too old and did not support this function (didn't have SMART either!).
skywatch