Official XBian 1.0 Beta 1.1 thread

[Pawlisko]

(17th Jul, 2013 11:09 PM)mk01 Wrote:  definitely NFS should be always preferred where available, system wise it takes almost no resources, it's native for your NAS as well as for RPI, minimum transfer protocol overhead etc (this is as general recommendation, not only to the problem of rename. it's weird though).

but turning off samba will clearly help both devices, NAS and also RPI. do you connect to the NAS from windows machines as well with no "rename issues"?

I will switch to NFS!

Would you be so kind and let me know what should I enter in the line of my fstab file to do it properly?

When I connect from other machines to my NAS there is no problem, I can do everything without any issue.

---

(16th Jul, 2013 02:11 PM)mk01 Wrote:  pawlisko,

i checked the guide, but didn't try, it is really the core known standard. only the scripting and hacking in interfaces looks suspicious.

at which step / stage you have issue?

Initially there was no problems. Everything was working good but as usual I rebooted to check everything (just in case)

After reboot time is not setting properly but I was able to connect.

Now I can't connect, even from within my home network. ***EDIT*** Thou it may be problem of my new router (no L2TP Passthrough option). Still time is not setting to current and proper one

The weirdest thing happens when entered:

Code:

root@xBian:/home/xbian# ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path                                 [OK]
Linux Openswan U2.6.37/K3.9.8+ (netkey)
Checking for IPsec support in kernel                            [OK]
SAref kernel support                                           [N/A]
NETKEY:  Testing XFRM related proc values                      [FAILED]

  Please disable /proc/sys/net/ipv4/conf/*/send_redirects
  or NETKEY will cause the sending of bogus ICMP redirects!

        [FAILED]

  Please disable /proc/sys/net/ipv4/conf/*/accept_redirects
  or NETKEY will accept bogus ICMP redirects!

        [OK]
Checking that pluto is running                                  [OK]
Pluto listening for IKE on udp 500                             [OK]
Pluto listening for NAT-T on udp 4500                          [OK]
Checking for 'ip' command                                       [OK]
Checking /bin/sh is not /bin/dash                               [WARNING]
Checking for 'iptables' command                                 [OK]
Opportunistic Encryption Support                                [DISABLED]

Previously everything was OK, now there are Failed fields and I haven't change anything.

Any thoughts?