Official XBian 1.0 Beta 1.1 thread

[Pawlisko]

(18th Jul, 2013 04:38 AM)mk01 Wrote:  ad ipsec, if you put

net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.all.accept_redirects=0

in /etc/sysctl.conf, what happens ? or just during run, do:

Code:

sudo sysctl -w net.ipv4.conf.all.send_redirects=0; sudo  sysctl -w net.ipv4.conf.all.accept_redirects=0

and retry the test ? (later: they are in /etc/sysctl.conf commented out, so just uncomment them. but it was like this prior beta as well)

mk01,

My ipsec test prior restart said OK where I have Failed now.

both redirects are uncommented, I tried also your command, got confirmation from system that it is OK but ipsec test still says that it is failure.

I know that I may ask for too much, please follow the L2TP instructions on clean install and then reboot the system. Everything was working prior reboot.

Thanks

---

(18th Jul, 2013 04:38 AM)mk01 Wrote:  ad the fstab, more or less like with cifs,
I use this one:

media.private:/xbmc /Network/Servers/media.private/xbmc nfs4 _netdev,rw,nfsvers=4,rsize=8192,wsize=8192,noatime 0 0

of course if you don't use nfs4, change to

Code:

media.private:/xbmc                /Network/Servers/media.private/xbmc    nfs    _netdev,rw,rsize=8192,wsize=8192,noatime    0    0

with nfs if you don't use uid a guid (you used file_mode=0777,dir_mode=0777 with cifs), you need to set all_squash and anonuid=NNN on the server on exports file definition.

the rsize and wsize are not needed, but as default nfs creates 1M buffer for read and also for write, that 2M per one mount, and I have 10, so it would take 20M down from memory.

NFS is not installed on this NAS. I will not change it. So back to CIFS

CIFS works correct. I am to blame for creating this mess. Because I work on many computers with different OSes I have to move many files from system to system, but for security purposes I can't have everything connected to everything, so I have to use different programs to be effective. One of such program is WinSCP. On theory it should be great and working on rpi SD card I havn't have any problems with anything, but when it comes to mount there was problem with renaming. I just check with mv command and it works perfectly.

Based on man 8 mount my fstab looks like this now:

Code:

//10.20.30.30/External\040Storage\Maxtor    /mnt/Maxtor    cifs    _netdev,user,exec,dev,suid,rw,credentials=/etc/seagate.conf,iocharset=utf8,file_mode=0777,dir_mode=0777    0    0

L2TP/Clock is still problem thou.