Official XBian 1.0 Beta 1.1 thread

[IriDium]

(26th Jul, 2013 08:22 AM)f1vefour Wrote:  

(26th Jul, 2013 06:32 AM)kraleksandr Wrote:  How can I see boot log which hidden behind splashscreen (xbian logo,"Loading..."and progressbar)?

You can add debug to cmdline.txt. The link CurlyMo provided gives the full list and what they do, thanks for that by the way.

---

(25th Jul, 2013 02:21 AM)IriDium Wrote:  Beta 1,1 Fresh install from xbian installer.

Mounting a USB drive, the device shows up in ssh df -h and in system->Info, however it is not shown in Videos, Music Pictures etc. It can be added via Add->Source but should be automounted.
Linked to Github issue #429

I may be misunderstanding your question but according to you the drive is mounted (df). It can be added to XBMC by Add -> Source. Did you plug the drive in and mount it yourself because I have no issue with drives auto-mounting.

Do you mean you have previously added the drive in question via Add -> Source setting the scraper type only to have XBMC forget this information upon removing/re-inserting the drive.

I switch on the RPi with the drives already attached, it boots normally.
Drives are visable in df -h and xbmc ->System Info. But if I go to videos or music they are not there.

The drive is detected:

Code:

hub 1-1.3.4:1.0: USB hub found
hub 1-1.3.4:1.0: 4 ports detected
usb 1-1.3.4.1: new high-speed USB device number 7 using dwc_otg
usb 1-1.3.4.1: New USB device found, idVendor=8564, idProduct=1000
usb 1-1.3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3.4.1: Product: Mass Storage Device
usb 1-1.3.4.1: Manufacturer: JetFlash
usb 1-1.3.4.1: SerialNumber: 1126037189

and mounted

Code:

/dev/sda1       7.4G  3.0G  4.5G  40% /media/E835-A67A

In XBMC - System Info
System Info
In XBMC - Videos (The ones shown are SMB)
Videos

It's the same if I use a HUB or directly into the RPi.

Tried an rpi-update but that didn't work either.
Could it be related to

Code:

init: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

In Alpha5 it worked - also if you hotplugged a USB drive you got a message USB drive mounted.