Threaded Mode | Linear Mode

blazinramirez · 2nd Jan, 2013, 02:04 AM

Hi there,

Thanks for your time but it is still not working. I even bought a new wireless adapter wich works better in openelec. But when I try to use it on A4 in network manager it is not able to show me ssid's or enter them manually. So here is my new TP-LINK TL-WN725N and the dmesg you asked for. I hope you can help me because xbian is way faster and more stable

Code:

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 105472

[    0.000000] free_area_init_node: node 0, pgdat c0565688, node_mem_map c060f00         0

[    0.000000]   Normal zone: 824 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 104648 pages, LIFO batch:31

[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[    0.000000] pcpu-alloc: [0] 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag         es: 104648

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280          bcm2708_fb.fbheight=720 bcm2708.boardrev=0xe bcm2708.serial=0x4ca4deb0 smsc95xx.         macaddr=B8:27:EB:A4:DE:B0 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_bas         e=0x19c00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.         sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstyp         e=ext4 rootwait

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] allocated 843776 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memor         y cgroups

[    0.000000] Memory: 412MB = 412MB total

[    0.000000] Memory: 411112k/411112k available, 10776k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xda000000 - 0xff000000   ( 592 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xd9c00000   ( 412 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc050daec   (5143 kB)

[    0.000000]       .init : 0xc050e000 - 0xc052ee40   ( 132 kB)

[    0.000000]       .data : 0xc0530000 - 0xc05661a0   ( 217 kB)

[    0.000000]        .bss : 0xc05661c4 - 0xc060e8cc   ( 674 kB)

[    0.000000] NR_IRQS:330

[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4         294967ms

[    0.000000] timer_set_mode: unhandled mode:1

[    0.000000] timer_set_mode: unhandled mode:3

[    0.000000] Console: colour dummy device 80x30

[    0.000000] console [tty1] enabled

[    0.001117] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)

[    0.060156] pid_max: default: 32768 minimum: 301

[    0.060486] Mount-cache hash table entries: 512

[    0.061288] Initializing cgroup subsys cpuacct

[    0.061347] Initializing cgroup subsys memory

[    0.061428] Initializing cgroup subsys devices

[    0.061464] Initializing cgroup subsys freezer

[    0.061495] Initializing cgroup subsys blkio

[    0.061602] CPU: Testing write buffer coherency: ok

[    0.061964] hw perfevents: enabled with v6 PMU driver, 3 counters available

[    0.062111] Setting up static identity map for 0x3ad738 - 0x3ad794

[    0.063767] devtmpfs: initialized

[    0.072482] NET: Registered protocol family 16

[    0.077404] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.078600] bcm2708.uart_clock = 0

[    0.080106] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.080285] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.080332] mailbox: Broadcom VideoCore Mailbox driver

[    0.080439] bcm2708_vcio: mailbox at f200b880

[    0.080548] bcm_power: Broadcom power driver

[    0.080589] bcm_power_open() -> 0

[    0.080615] bcm_power_request(0, 8)

[    0.581299] bcm_mailbox_read -> 00000080, 0

[    0.581342] bcm_power_request -> 0

[    0.581369] Serial: AMBA PL011 UART driver

[    0.581524] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3

[    0.602056] bio: create slab <bio-0> at 0

[    0.603007] SCSI subsystem initialized

[    0.603275] usbcore: registered new interface driver usbfs

[    0.603413] usbcore: registered new interface driver hub

[    0.603724] usbcore: registered new device driver usb

[    0.605124] Switching to clocksource stc

[    0.605392] FS-Cache: Loaded

[    0.605690] CacheFiles: Loaded

[    0.618600] NET: Registered protocol family 2

[    0.619473] TCP established hash table entries: 16384 (order: 5, 131072 bytes         )

[    0.620262] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

[    0.620709] TCP: Hash tables configured (established 16384 bind 16384)

[    0.620807] TCP: reno registered

[    0.620856] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    0.620927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    0.621322] NET: Registered protocol family 1

[    0.622036] RPC: Registered named UNIX socket transport module.

[    0.622100] RPC: Registered udp transport module.

[    0.622132] RPC: Registered tcp transport module.

[    0.622162] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.622863] bcm2708_dma: DMA manager at f2007000

[    0.622994] bcm2708_gpio: bcm2708_gpio_probe c053de68

[    0.623393] vc-mem: phys_addr:0x00000000 mem_base=0x19c00000 mem_size:0x20000         000(512 MiB)

[    0.624414] audit: initializing netlink socket (disabled)

[    0.624521] type=2000 audit(0.600:1): initialized

[    0.745181] VFS: Disk quotas dquot_6.5.2

[    0.745403] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.745893] FS-Cache: Netfs 'nfs' registered for caching

[    0.746350] NFS: Registering the id_resolver key type

[    0.746536] Key type id_resolver registered

[    0.746574] Key type id_legacy registered

[    0.746971] msgmni has been set to 802

[    0.749131] io scheduler noop registered

[    0.749196] io scheduler deadline registered

[    0.749251] io scheduler cfq registered (default)

[    0.754568] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64

[    0.754609] crc32: self tests passed, processed 225944 bytes in 2589000 nsec

[    0.756737] crc32c: CRC_LE_BITS = 64

[    0.756780] crc32c: self tests passed, processed 225944 bytes in 931000 nsec

[    0.777195] Console: switching to colour frame buffer device 160x45

[    0.799741] brd: module loaded

[    0.805134] loop: module loaded

[    0.805785] vcos: [1]: vchiq_init_state: slot_zero = 0xda004000, is_master =          0

[    0.806529] vcos: [1]: vchiq_init_state: called

[    0.807371] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0

[    0.808027] usbcore: registered new interface driver smsc95xx

[    0.808413] usbcore: registered new interface driver cdc_ncm

[    0.808616] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    1.013995] Core Release: 2.80a

[    1.014132] Setting default values for core params

[    1.018550] Finished setting default values for core params

[    1.228005] Using Buffer DMA mode

[    1.232237] Periodic Transfer Interrupt Enhancement - disabled

[    1.236590] Multiprocessor Interrupt Enhancement - disabled

[    1.240860] OTG VER PARAM: 0, OTG VER FLAG: 0

[    1.245088] Dedicated Tx FIFOs mode

[    1.249645] dwc_otg: Microframe scheduler enabled

[    1.249716] dwc_otg bcm2708_usb: DWC OTG Controller

[    1.254149] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number          1

[    1.258757] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000

[    1.263171] Init: Port Power? op_state=1

[    1.267587] Init: Power Port (0)

[    1.272016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.276434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=         1

[    1.280741] usb usb1: Product: DWC OTG Controller

[    1.284979] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd

[    1.289348] usb usb1: SerialNumber: bcm2708_usb

[    1.294489] hub 1-0:1.0: USB hub found

[    1.298825] hub 1-0:1.0: 1 port detected

[    1.303397] dwc_otg: FIQ enabled

[    1.303420] dwc_otg: NAK holdoff enabled

[    1.303441] Module dwc_common_port init

[    1.303718] Initializing USB Mass Storage driver...

[    1.308312] usbcore: registered new interface driver usb-storage

[    1.312547] USB Mass Storage support registered.

[    1.317127] usbcore: registered new interface driver libusual

[    1.321882] mousedev: PS/2 mouse device common for all mice

[    1.327129] bcm2835-cpufreq: min=700000 max=840000 cur=700000

[    1.327409] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq         : switching to governor performance

[    1.332951] cpuidle: using governor ladder

[    1.340361] cpuidle: using governor menu

[    1.344166] sdhci: Secure Digital Host Controller Interface driver

[    1.347927] sdhci: Copyright(c) Pierre Ossman

[    1.351737] sdhci: Enable low-latency mode

[    1.355816] Registered led device: mmc0::

[    1.395471] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor         m's DMA

[    1.399263] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77

[    1.403075] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.409553] usbcore: registered new interface driver usbhid

[    1.416514] usbhid: USB HID core driver

[    1.427664] TCP: cubic registered

[    1.433550] Initializing XFRM netlink socket

[    1.439586] NET: Registered protocol family 17

[    1.443595] Key type dns_resolver registered

[    1.450974] VFP support v0.3: implementor 41 architecture 1 part 20 variant b          rev 5

[    1.455798] registered taskstats version 1

[    1.460126] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

[    1.464456] Waiting for root device /dev/mmcblk0p2...

[    1.495346] Indeed it is in host mode hprt0 = 00021501

[    1.507375] mmc0: could read SD Status register (SSR) at the 3th attempt

[    1.515422] mmc0: new SD card at address e624

[    1.525587] mmcblk0: mmc0:e624 SD02G 1.89 GiB

[    1.531288]  mmcblk0: p1 p2

[    1.695310] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.699713] Indeed it is in host mode hprt0 = 00001101

[    1.905587] usb 1-1: New USB device found, idVendor=0424, idProduct=9512

[    1.911893] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.917551] hub 1-1:1.0: USB hub found

[    1.922383] hub 1-1:1.0: 3 ports detected

[    2.205477] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    2.305610] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    2.309536] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber         =0

[    2.327981] smsc95xx v1.0.4

[    2.399650] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-         1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:de:b0

[    2.495364] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

[    2.607020] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176

[    2.611197] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber         =3

[    2.625244] usb 1-1.2: Product: 802.11n WLAN Adapter

[    2.629368] usb 1-1.2: Manufacturer: Realtek

[    2.633389] usb 1-1.2: SerialNumber: 00e04c000001

[    6.325938] EXT4-fs (mmcblk0p2): recovery complete

[    6.463908] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O         pts: (null)

[    6.468242] VFS: Mounted root (ext4 filesystem) on device 179:2.

[    6.473615] devtmpfs: mounted

[    6.478583] Freeing init memory: 128K

[    7.956144] udevd[143]: starting version 175

[   10.172278] usbcore: registered new interface driver rtl8192cu

[   15.725843] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[   16.191577] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[   16.843961] bcm2835 ALSA card created!

[   16.855475] bcm2835 ALSA chip created!

[   16.862699] bcm2835 ALSA chip created!

[   16.871882] bcm2835 ALSA chip created!

[   16.879945] bcm2835 ALSA chip created!

[   16.886899] bcm2835 ALSA chip created!

[   16.895381] bcm2835 ALSA chip created!

[   16.901688] bcm2835 ALSA chip created!

[   20.764598] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignorin         g it

[   20.768382] mmc0: DMA IRQ 6 ignored - results were reset

[   24.391126] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[   25.793818] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5         E1

(19th Dec, 2012 10:41 PM)CurlyMo Wrote: Just what i though, the rt2800usb module, exactly the same as the one i let you load:

Code:

sudo modprobe rt2800usb

Can you again load this module and then post the dmesg.
1) Load module
2) Remove adapter
3) Plug adapter back in
4) Post dmesg

Also try our latest kernel:

Code:

sudo apt-get install xbian-pakage-kernel3.6.10