Issues with Logitech Harmony

[jphebert]

(30th Nov, 2013 01:44 AM)IriDium Wrote:  Try again but with mode2 - my typo.

The GPIO has been recognised

Code:

[ 3594.710208] lirc_rpi lirc_rpi.0: lirc_dev: driver lirc_rpi registered at minor = 0
[ 3594.710233] lirc_rpi: driver registered!
[ 3595.660552] lirc_rpi: auto-detected active low receiver on GPIO pin 18

Hi - huzzas I saw codes show up, but nothing on the screen moved just yet with either remote (MCE & Harmony 700).

Here are the bits of info:
1- Sample of the remote signals for MCE:root@xbian:~# sudo mode2 -d /dev/lirc0
space 8181133
pulse 518
space 1980
pulse 525
space 1138
pulse 2179
space 1175
pulse 3803
space 1201
pulse 493
space 1989
pulse 3820
space 2009
pulse 508
space 1990
pulse 491
space 25736
pulse 511
space 1981

For Harmony:
sudo mode2 -d /dev/lirc0
pulse 453
space 868
pulse 453
space 430
pulse 470
space 437
pulse 440
space 446
pulse 440
space 429
pulse 894
space 895
pulse 453
space 453
pulse 426

2- sudo cat /proc/interrupts
CPU0
3: 40565 ARMCTRL BCM2708 Timer Tick
32: 100776 ARMCTRL dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb1
52: 1719 ARMCTRL BCM2708 GPIO catchall handler
65: 7 ARMCTRL ARM Mailbox IRQ
66: 6890 ARMCTRL VCHIQ doorbell
75: 1 ARMCTRL
77: 11026 ARMCTRL bcm2708_sdhci (dma)
84: 7475 ARMCTRL mmc0
188: 1719 GPIO
FIQ: usb_fiq
Err: 0

3- dmesg is here: http://pastebin.com/E7Hz4hzF

Many thanks!