Issues with Logitech Harmony

[jphebert]

(30th Nov, 2013 08:47 PM)IriDium Wrote:  Well that shows it's "Working".

I still need the output from:
sudo mount -t debugfs debugfs /sys/kernel/debug
and
sudo cat /sys/kernel/debug/gpio
and
sudo modprobe lirc_rpi debug=1
and then
sudo cat /proc/interrupts

Then reboot;

sudo stop xbmc
sudo modprobe lirc_rpi
sudo start xbmc

If that doesn't work, then that's my "lot" used up.

Thanks - here are the outputs:

1- sudo mount -t debugfs debugfs /sys/kernel/debug
mount: debugfs already mounted or /sys/kernel/debug busy
mount: according to mtab, debugfs is already mounted on /sys/kernel/debug

2- sudo cat /sys/kernel/debug/gpio
GPIOs 0-53, bcm2708_gpio:
gpio-17 (lirc_rpi ir/out ) in lo
gpio-18 (lirc_rpi ir/in ) in hi

3- done, no output

4- sudo cat /proc/interrupts
CPU0
3: 23745020 ARMCTRL BCM2708 Timer Tick
32: 37106100 ARMCTRL dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb1
52: 3461 ARMCTRL BCM2708 GPIO catchall handler
65: 7 ARMCTRL ARM Mailbox IRQ
66: 12131490 ARMCTRL VCHIQ doorbell
75: 1 ARMCTRL
77: 344426 ARMCTRL bcm2708_sdhci (dma)
84: 271643 ARMCTRL mmc0
188: 3461 GPIO
FIQ: usb_fiq
Err: 0

5- After the reboot 3 actions done. Still nothing. Weird.

Would it be possible that the current build has a piece missing from the drivers used by the IR receiver? Odds not but thought I'd ask.
-

---

(30th Nov, 2013 10:34 PM)jphebert Wrote:  

(30th Nov, 2013 08:47 PM)IriDium Wrote:  Well that shows it's "Working".

I still need the output from:
sudo mount -t debugfs debugfs /sys/kernel/debug
and
sudo cat /sys/kernel/debug/gpio
and
sudo modprobe lirc_rpi debug=1
and then
sudo cat /proc/interrupts

Then reboot;

sudo stop xbmc
sudo modprobe lirc_rpi
sudo start xbmc

If that doesn't work, then that's my "lot" used up.

Thanks - here are the outputs:

1- sudo mount -t debugfs debugfs /sys/kernel/debug
mount: debugfs already mounted or /sys/kernel/debug busy
mount: according to mtab, debugfs is already mounted on /sys/kernel/debug

2- sudo cat /sys/kernel/debug/gpio
GPIOs 0-53, bcm2708_gpio:
gpio-17 (lirc_rpi ir/out ) in lo
gpio-18 (lirc_rpi ir/in ) in hi

3- done, no output

4- sudo cat /proc/interrupts
CPU0
3: 23745020 ARMCTRL BCM2708 Timer Tick
32: 37106100 ARMCTRL dwc_otg, dwc_otg_pcd, dwc_otg_hcd:usb1
52: 3461 ARMCTRL BCM2708 GPIO catchall handler
65: 7 ARMCTRL ARM Mailbox IRQ
66: 12131490 ARMCTRL VCHIQ doorbell
75: 1 ARMCTRL
77: 344426 ARMCTRL bcm2708_sdhci (dma)
84: 271643 ARMCTRL mmc0
188: 3461 GPIO
FIQ: usb_fiq
Err: 0

5- After the reboot 3 actions done. Still nothing. Weird.

Would it be possible that the current build has a piece missing from the drivers used by the IR receiver? Odds not but thought I'd ask.
-

Me thinks we've beaten up this critter plenty - time to move to plan B. Do you have a suggested USB IR receiver which will be nice enough looking for a living room I can put onto my Pi which will work out of the box (or as close as you can)? The IR receiver is really nice as it fits in the case but providing lots of heartburn. Many thanks!