[SOLVED] usb drive not found

[Xavier Lannoye]

(11th Dec, 2013 01:07 AM)Killerbee Wrote:  Can you show us the output of lsusb and mount when you connect your mediatank to your ubuntu laptop?
Whaty filesystem is used on you mediatank? NTFS?

KB

hi,

here you have

Terminal

yull@xbian ~ $ lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.

Terminal

yull@xbian ~ $ mount
/dev/mmcblk0p2 on / type btrfs (rw,relatime,compress=lzo,ssd,space_cache,autodefrag)
devtmpfs on /dev type devtmpfs (rw,relatime,size=127000k,nr_inodes=31750,mode=755)
none on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
none on /proc type proc (rw,nosuid,nodev,noexec,relatime)
none on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
none on /run type tmpfs (rw,nosuid,nodev,noexec,noatime,size=25416k)
/dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,​errors=remount-ro)
/dev/mmcblk0p2 on /home type btrfs (rw,noatime,compress=lzo,ssd,space_cache,autodefrag)
/dev/mmcblk0p2 on /lib/modules type btrfs (rw,noatime,compress=lzo,ssd,space_cache,autodefrag)
/dev/mmcblk0p2 on /xbmc-backup type btrfs (rw,noatime,compress=lzo,ssd,space_cache,autodefrag)

Now, on a second reading (and with a lot more coffee in my veins), I see that the lsusb -> device 001 shows me a root hub. Could it be possible that that is my xtreamer? Because I can put two hard drives into the xtreamer pro, so maybe the usb connection "takes it" as a hub.

best regards

---

(11th Dec, 2013 05:29 AM)IriDium Wrote:  What release of Xbian are you using? If Beta 1.1 I suggest upgrading or doing a fresh install of Beta 2.

If Beta 1.1 check that dbus is running in xbian-config.

this is what I get when I log in with ssh. I guess it is a beta2 one.

Terminal

Linux xbian 3.10.12+ #61 Fri Sep 27 19:40:13 CEST 2013
XBian v1.0B2 - XBMC on the Raspbery Pi, Bleeding Edge, 2012 - 2013
! rpi-update usage at your own risk. can break your xbian setup !