[PROBLEM] Xbian is corrupted upon reboot

[omiazad]

(18th Dec, 2013 05:03 AM)IriDium Wrote:  If you'd posted the information in "please read before you post" I wouldn't have to keep asking questions
1) What model RPi are you using?
2) What is your power supply amperage?

Something is amiss.
gpu_mem_512=128 should read gpu_mem_512=256
Your cmdline.txt file looks corrupted.

It should read something like this:

Code:

sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcbl
k0p2 rootflags=subvol=root/@,autodefrag,compress=lzo rootfstype=btrfs rootwait s
msc95xx.turbo_mode=Y elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.s
can=sync partswap startevent=mountall splash nohdparm --startup-event mountall

If you have access to a windoze machine can you try the installer there. If not, check cmdline.txt and if it is garbage, change it to the code above, also change config.txt to 256 and report back.

If that works, then it's a problem with the Mac OSX installer.

I'm using the Model B and powering directly from my TV's 1amp USB port.

I don't buy that the problem is from Mac's installer. I've been using the same thing for a very long time. Never had such problem. If the installed had this problem, then why it booted at the very first place? I think some update is eating this up. I've changed the cmdline file according to your code above. Didn't help. Also installed with win32diskimager, same problem.

Please accept my apologies as I'm not very good with understanding all these.