XBMC Newbie and CEC Stopped working

[Stuart White]

Tried it to no avail. I'm pretty sure this is down to the latest libcec or cec package anyway.. If the following can be made sense of by anyone:


DEBUG: [ 992] command 'POLL' was not acked by the controller
TRAFFIC: [ 992] << 10
DEBUG: [ 992] sending data: len = 0, payload = 10
DEBUG: [ 1057] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
DEBUG: [ 1057] command 'POLL' was not acked by the controller
DEBUG: [ 1057] >> POLL not sent
DEBUG: [ 1057] not sending command 'set osd name': destination device 'TV' marked as not present
DEBUG: [ 1058] << requesting power status of 'TV' (0)
DEBUG: [ 1058] << Recorder 1 (1) -> TV (0): POLL
TRAFFIC: [ 1058] << 10
DEBUG: [ 1058] sending data: len = 0, payload = 10
^Csignal caught: 2 - exiting
DEBUG: [ 1147] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
DEBUG: [ 1147] command 'POLL' was not acked by the controller
TRAFFIC: [ 1147] << 10
DEBUG: [ 1147] sending data: len = 0, payload = 10
DEBUG: [ 1237] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
DEBUG: [ 1237] command 'POLL' was not acked by the controller
DEBUG: [ 1237] >> POLL not sent
DEBUG: [ 1237] not sending command 'give device power status': destination device 'TV' marked as not present
waiting for input
DEBUG: [ 1237] unregistering all CEC clients
NOTICE: [ 1238] unregistering client: libCEC version = 2.1.4, client version = 2.1.4, firmware version = 1, logical address(es) = Recorder 1 (1) , physical address: 2.0.0.0, host: arm-bcm2708hardfp-linux-gnueabi, features: 'P8 USB' 'RPi', git revision: 30d9194, compiled on: Wed Dec 18 01:15:54 UTC 2013 by root@g630 on Linux 3.11.0-14-generic (x86_64)
DEBUG: [ 1238] Recorder 1 (1): power status changed from 'on' to 'unknown'
DEBUG: [ 1238] Recorder 1 (1): vendor = Unknown (000000)
DEBUG: [ 1238] Recorder 1 (1): CEC version unknown
DEBUG: [ 1238] Recorder 1 (1): osd name set to 'Recorder 1'
DEBUG: [ 1238] Recorder 1 (1): device status changed into 'unknown'
DEBUG: [ 1238] unregistering all CEC clients
DEBUG: [ 1327] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
WARNING: [ 1327] unhandled response received: opcode=0 initiator=1 destination=0 response=1
DEBUG: [ 2083] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
WARNING: [ 2083] unhandled response received: opcode=0 initiator=1 destination=0 response=1
DEBUG: [ 2174] received data: header:01010001 p0:00000010 p1:00000000 p2:00000000 p3:00000000 reason:1
WARNING: [ 2174] unhandled response received: opcode=0 initiator=1 destination=0 response=1
DEBUG: [ 2212] UnregisterLogicalAddress - releasing previous logical address
DEBUG: [ 2213] received data: header:00060040 p0:0000000F p1:0000FFFF p2:00000000 p3:00000000 reason:40
DEBUG: [ 2214] logical address changed to Broadcast (f)
root@xbian:/home/xbian# cec-client -i
libCEC version: 2.1.4, host: arm-bcm2708hardfp-linux-gnueabi, features: 'P8 USB' 'RPi', git revision: 30d9194, compiled on: Wed Dec 18 01:15:54 UTC 2013 by root@g630 on Linux 3.11.0-14-generic (x86_64)
root@xbian:/home/xbian#