Forum
  • Search
  • Member List
  • Calendar
Hello There, Guest! Login Register — Login with Facebook

[PROBLEM] Beta 1.2 -> RC 2
Thank you for your donation

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode | Linear Mode
Problem: Beta 1.2 -> RC 2
1st Oct, 2014, 03:59 AM
Post: #25
syco Offline
Registered
Posts: 184
Joined: Apr 2013
Reputation: 0
RE: Beta 1.2 -> RC 2
(1st Oct, 2014 03:21 AM)menakite Wrote:  I suspect it's busy updating your databases and the time out is too small. What if you do the following:
Terminal
sudo nano /etc/init/xbmc.conf

Search for these 2 lines (lines 40-41 here):
Code:
post-start script
    /sbin/start -q wait-for-state TIMEOUT=100 WAIT_FOR=xbmc-loaded WAITER=xbmc WAIT_STATE=started ACT=no || { /sbin/initctl emit -n xbmc-failed-start; stop; exit 1; }

and change that TIMEOUT=100 to TIMEOUT=100000 or any other big number. Then stop and start XBMC again, or reboot. It may indeed need a while if it's updating databases, but it shouldn't crash anymore.

If it works, change it back to 100. If it doesn't, change it back to 100 and upload the following log files somewhere:
* /home/xbian/.xbmc/temp/xbmc.log;
* /var/log/upstart/xbmc.log (you'll need "sudo" to read it);
* the output of the command "dmesg".

The 100000 time change did not make any difference, but thanks and here is the output:

home/xbian/.xbmc/temp/xbmc.log (I am not sure about this, because it did not show the current time):

Code:
15:53:09 T:3037364224  NOTICE: special://profile/ is mapped to: special://masterprofile/
15:53:09 T:3037364224  NOTICE: -----------------------------------------------------------------------
15:53:09 T:3037364224  NOTICE: Starting XBMC (13.2 Git:20140912-4ecca7f). Platform: ARM Linux 32-bit
15:53:09 T:3037364224  NOTICE: Using Release XBMC x32 build, compiled Sep 24 2014 by GCC 4.6.3 for ARM Linux 32-bit 3.10.30
15:53:09 T:3037364224  NOTICE: Running on Linux 32-bit (XBian 1.0 (knockout), 3.15.8+ armv6l)
15:53:09 T:3037364224  NOTICE: Host CPU: ARMv6-compatible processor rev 7 (v6l), 1 core available
15:53:09 T:3037364224  NOTICE: ARM Features: Neon disabled
15:53:09 T:3037364224  NOTICE: special://xbmc/ is mapped to: /usr/local/share/xbmc
15:53:09 T:3037364224  NOTICE: special://xbmcbin/ is mapped to: /usr/local/lib/xbmc
15:53:09 T:3037364224  NOTICE: special://masterprofile/ is mapped to: /home/xbian/.xbmc/userdata
15:53:09 T:3037364224  NOTICE: special://home/ is mapped to: /home/xbian/.xbmc
15:53:09 T:3037364224  NOTICE: special://temp/ is mapped to: /home/xbian/.xbmc/temp
15:53:09 T:3037364224  NOTICE: The executable running is: /usr/local/lib/xbmc/xbmc.bin
15:53:09 T:3037364224  NOTICE: Local hostname: xbian
15:53:09 T:3037364224  NOTICE: Log File is located: /home/xbian/.xbmc/temp/xbmc.log
15:53:09 T:3037364224  NOTICE: -----------------------------------------------------------------------
15:53:09 T:3037364224  NOTICE: load settings...
15:53:09 T:3037364224  NOTICE: Found 1 Lists of Devices
15:53:09 T:3037364224  NOTICE: Enumerated PI devices:
15:53:09 T:3037364224  NOTICE:     Device 1
15:53:09 T:3037364224  NOTICE:         m_deviceName      : HDMI
15:53:09 T:3037364224  NOTICE:         m_displayName     : HDMI
15:53:09 T:3037364224  NOTICE:         m_displayNameExtra:
15:53:09 T:3037364224  NOTICE:         m_deviceType      : AE_DEVTYPE_HDMI
15:53:09 T:3037364224  NOTICE:         m_channels        : FL,FR
15:53:09 T:3037364224  NOTICE:         m_sampleRates     : 8000,11025,16000,22050,24000,32000,41400,48000,88200,96000,176400,192000
15:53:09 T:3037364224  NOTICE:         m_dataFormats     : AE_FMT_FLOAT,AE_FMT_S32LE,AE_FMT_S16LE,AE_FMT_AC3,AE_FMT_DTS,AE_FMT_EAC3
15:53:09 T:3037364224  NOTICE:     Device 2
15:53:09 T:3037364224  NOTICE:         m_deviceName      : Analogue
15:53:09 T:3037364224  NOTICE:         m_displayName     : Analogue
15:53:09 T:3037364224  NOTICE:         m_displayNameExtra:
15:53:09 T:3037364224  NOTICE:         m_deviceType      : AE_DEVTYPE_PCM
15:53:09 T:3037364224  NOTICE:         m_channels        : FL,FR
15:53:09 T:3037364224  NOTICE:         m_sampleRates     : 48000
15:53:09 T:3037364224  NOTICE:         m_dataFormats     : AE_FMT_FLOAT,AE_FMT_S32LE,AE_FMT_S16LE
15:53:10 T:3037364224  NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml
15:53:10 T:3037364224  NOTICE: Contents of special://xbmc/system/advancedsettings.xml are...
                                            <?xml version="1.0" encoding="UTF-8" ?>
                                            <advancedsettings>
                                              <video>
                                                <defaultplayer>omxplayer</defaultplayer>
                                                <defaultdvdplayer>omxplayer</defaultdvdplayer>
                                              </video>
                                            </advancedsettings>
15:53:10 T:3037364224  NOTICE: Loaded settings file from special://profile/advancedsettings.xml
15:53:10 T:3037364224  NOTICE: Contents of special://profile/advancedsettings.xml are...
                                            <advancedsettings>
                                              <network>
                                                <cachemembuffersize>20971520</cachemembuffersize>
                                              </network>
                                              <fanartres>720</fanartres>
                                              <imageres>540</imageres>
                                              <gputempcommand>echo &quot;$(/opt/vc/bin/vcgencmd measure_temp | grep -o &quot;[0-9]\{2\}&quot;) C&quot;</gputempcommand>
                                              <cputempcommand>echo &quot;$(/opt/vc/bin/vcgencmd measure_temp | grep -o &quot;[0-9]\{2\}&quot;) C&quot;</cputempcommand>
                                              <lookandfeel>
                                                <webserver>true</webserver>
                                                <guires>720</guires>
                                              </lookandfeel>
                                              <bginfoloadermaxthreads>5</bginfoloadermaxthreads>
                                              <video>
                                                <adjustrefreshrate>
                                                  <override>
                                                    <fps>23.976</fps>
                                                    <refresh>24.0</refresh>
                                                  </override>
                                                </adjustrefreshrate>
                                              </video>
                                              <gui>
                                                <visualizedirtyregions>false</visualizedirtyregions>
                                              </gui>
                                              <destroywindowcontrols>0</destroywindowcontrols>
                                              <useddsfanart>0</useddsfanart>
                                            </advancedsettings>
15:53:10 T:3037364224  NOTICE: Default DVD Player: omxplayer
15:53:10 T:3037364224  NOTICE: Default Video Player: omxplayer
15:53:10 T:3037364224  NOTICE: Default Audio Player: paplayer
15:53:10 T:3037364224  NOTICE: Disabled debug logging due to GUI setting. Level 0.
15:53:10 T:3037364224  NOTICE: Log level changed to 0
15:53:10 T:3037364224  NOTICE: CMediaSourceSettings: loading media sources from special://masterprofile/sources.xml
15:53:10 T:3037364224  NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
15:53:10 T:3037364224  NOTICE: Loaded playercorefactory configuration
15:53:10 T:3037364224  NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
15:53:10 T:3037364224  NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
15:53:10 T:3035792448  NOTICE: Thread ActiveAE start, auto delete: false
15:53:10 T:3027403840  NOTICE: Thread AESink start, auto delete: false
15:53:10 T:2968683584  NOTICE: Thread CRBPWorker start, auto delete: false
15:53:10 T:3037364224  NOTICE: Running database version Addons16
15:53:12 T:3037364224  NOTICE: ADDONS: Using repository repository.xbmc.org
15:53:12 T:3037364224  NOTICE: ADDONS: Using repository repository.superrepo.org.frodo.repositories
15:53:12 T:3037364224  NOTICE: ADDONS: Using repository repo.xbian.xbmc
15:53:12 T:3037364224  NOTICE: Register - new cec device registered on cec->RPI: CEC Adapter (2708:1001)
15:53:12 T:2951074880  NOTICE: Thread PeripBusCEC start, auto delete: false
15:53:12 T:2959463488  NOTICE: Thread CECAdapter start, auto delete: false
15:53:12 T:2941252672  NOTICE: Thread PeripBusUSBUdev start, auto delete: false
15:53:12 T:3037364224  NOTICE: Raspberry PI firmware version: Aug 12 2014 18:21:28
                                            Copyright (c) 2012 Broadcom
                                            version f32b2bbfdea55d48c9a52b92e5c798f9aa5f47bc (tainted) (release)
15:53:12 T:3037364224  NOTICE: ARM mem: 384MB GPU mem: 128MB MPG2:1 WVC1:1
15:53:12 T:3037364224  NOTICE: InitWindowSystem: Using EGL Implementation: raspberrypi
15:53:12 T:3037364224  NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz
15:53:12 T:3037364224  NOTICE: Found (1920x1080@60.000000) at 16, setting to RES_DESKTOP at 16
15:53:12 T:3037364224  NOTICE: Checking resolution 16
15:53:12 T:3037364224  NOTICE: GL_VENDOR = Broadcom
15:53:12 T:3037364224  NOTICE: GL_RENDERER = VideoCore IV HW
15:53:12 T:3037364224  NOTICE: GL_VERSION = OpenGL ES 2.0
15:53:12 T:3037364224  NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 1.00
15:53:12 T:3037364224  NOTICE: GL_EXTENSIONS = GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_texture_npot GL_OES_depth24 GL_OES_vertex_half_float GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_discard_framebuffer GL_OES_rgb8_rgba8 GL_OES_depth32 GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_APPLE_rgb_422 GL_EXT_debug_marker
15:53:13 T:2916086848  NOTICE: Thread CECAdapterUpdate start, auto delete: false
15:53:13 T:3037364224  NOTICE: No Joystick name specified, loading default map
15:53:13 T:3037364224  NOTICE: Previous line repeats 35 times.
15:53:13 T:3037364224  NOTICE: Running database version Addons16
15:53:13 T:3037364224  NOTICE: Running database version ViewModes6
15:53:13 T:3037364224  NOTICE: Running database version Textures13
15:53:13 T:3037364224  NOTICE: Running database version MyMusic46
15:53:13 T:3037364224  NOTICE: Running database version MyVideos78
15:53:13 T:3037364224  NOTICE: Running database version TV22
15:53:13 T:3037364224  NOTICE: Running database version Epg7
15:53:13 T:3037364224  NOTICE: start dvd mediatype detection
15:53:14 T:2907173952  NOTICE: Thread DetectDVDMedia start, auto delete: false
15:53:17 T:3037364224 WARNING: JSONRPC: Could not parse type "GUI.Property.Value"
15:53:17 T:3037364224 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList"
15:53:18 T:2887775296  NOTICE: Thread LanguageInvoker start, auto delete: false
15:53:18 T:3037364224  NOTICE: Previous line repeats 2 times.
15:53:18 T:3037364224  NOTICE: initialize done
15:53:18 T:2854220864  NOTICE: Thread LanguageInvoker start, auto delete: false
15:53:18 T:3037364224  NOTICE: Previous line repeats 2 times.
15:53:18 T:3037364224  NOTICE: Running the application...
15:53:21 T:2843735104  NOTICE: Thread JobWorker start, auto delete: true
15:53:21 T:3037364224   ERROR: CZeroconfAvahi::CZeroconfAvahi(): Could not create client
15:53:21 T:3037364224  NOTICE: starting zeroconf publishing
15:53:21 T:3037364224  NOTICE: Webserver: Starting...
15:53:21 T:2826957888  NOTICE: Thread JobWorker start, auto delete: true
15:53:21 T:3037364224  NOTICE: WebServer: Started the webserver
15:53:21 T:3037364224  NOTICE: starting upnp renderer
15:53:21 T:3037364224  NOTICE: ES: Starting event server
15:53:21 T:2785014848  NOTICE: Thread EventServer start, auto delete: false
15:53:21 T:2785014848  NOTICE: ES: Starting UDP Event server on 0.0.0.0:9777
15:53:21 T:2785014848  NOTICE: UDP: Listening on port 9777
15:53:21 T:2776626240  NOTICE: Thread TCPServer start, auto delete: false
15:53:22 T:2768237632  NOTICE: Thread FileCache start, auto delete: false
15:53:26 T:2702177344  NOTICE: Previous line repeats 2 times.
15:53:26 T:2702177344  NOTICE: Thread JobWorker start, auto delete: true
15:53:28 T:2718954560  NOTICE: Previous line repeats 1 times.
15:53:28 T:2718954560  NOTICE: Thread FileCache start, auto delete: false
15:53:49 T:2879386688  NOTICE: -->Python Interpreter Initialized<--
15:53:51 T:2896163904  NOTICE: -->Python Interpreter Initialized<--
15:53:51 T:2870998080  NOTICE: -->Python Interpreter Initialized<--
15:53:51 T:2862609472  NOTICE: -->Python Interpreter Initialized<--
15:53:51 T:2854220864  NOTICE: -->Python Interpreter Initialized<--
15:53:51 T:2887775296  NOTICE: -->Python Interpreter Initialized<--
15:54:00 T:2870998080  NOTICE: en
15:54:05 T:2826957888   ERROR: CCurlFile::FillBuffer - Failed: HTTP response code said error(22)
15:54:05 T:2826957888  NOTICE: CCurlFile::FillBuffer - Reconnect, (re)try 1
15:54:05 T:2826957888   ERROR: CCurlFile::FillBuffer - Failed: HTTP response code said error(22)
15:54:05 T:2826957888   ERROR: CCurlFile::CReadState::Connect, didn't get any data from stream.
15:54:05 T:2826957888   ERROR: Open - failed to open source <http://addons.superrepo.org/Frodo/Repositories/addons.xml.md5>
15:54:06 T:2826957888   ERROR: CCurlFile::FillBuffer - Failed: HTTP response code said error(22)
15:54:06 T:2826957888  NOTICE: CCurlFile::FillBuffer - Reconnect, (re)try 1
15:54:06 T:2826957888   ERROR: CCurlFile::FillBuffer - Failed: HTTP response code said error(22)
15:54:06 T:2826957888   ERROR: CCurlFile::CReadState::Connect, didn't get any data from stream.
15:54:06 T:2826957888   ERROR: Open - failed to open source <http://addons.superrepo.org/Frodo/Repositories/addons.xml>
15:54:06 T:2826957888   ERROR: Repository SuperRepo Repositories List returned no add-ons, listing may have failed
15:54:07 T:2702177344  NOTICE: Thread FileCache start, auto delete: false
15:54:15 T:2870998080  NOTICE: XBian : upgrade service started
15:54:17 T:2702177344  NOTICE: Thread FileCache start, auto delete: false
15:54:24 T:2702177344  NOTICE: Previous line repeats 2 times.
15:54:24 T:2702177344  NOTICE: Thread JobWorker start, auto delete: true
15:54:28 T:2768237632  NOTICE: Thread FileCache start, auto delete: false
15:54:31 T:2702177344  NOTICE: Previous line repeats 1 times.
15:54:31 T:2702177344   ERROR: CPythonInvoker(1, /usr/local/share/xbmc/addons/service.xbmc.versioncheck/service.py): script didn't stop in 5 seconds - let's kill it

system-logs/upstart/xbmc.log:
Code:
/usr/bin/splash: 62: /usr/bin/splash: cannot create /dev/tty4: Permission denied
/usr/bin/splash: 62: /usr/bin/splash: cannot create /dev/tty4: Permission denied
Exception SystemExit in <function _remove at 0x4054570> ignored
Sending action: XBMC.Quit
stop: Job has already been stopped: xbmc
Exception TypeError: "'NoneType' object is not callable" in  ignored
Exception SystemExit in  ignored
Exception TypeError: "'NoneType' object is not callable" in  ignored
Exception TypeError: "'NoneType' object is not callable" in  ignored
/usr/bin/splash: 62: /usr/bin/splash: cannot create /dev/tty4: Permission denied
/usr/bin/splash: 62: /usr/bin/splash: cannot create /dev/tty4: Permission denied
Sending action: XBMC.Quit
Exception TypeError: "'NoneType' object is not callable" in  ignored
Exception TypeError: "'NoneType' object is not callable" in  ignored
Exception SystemExit in <bound method Popen.__del__ of <subprocess.Popen object at 0x2e9e070>> ignored

dmesg:
Code:
zo,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N elevator=cfq logo.                                 nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall s                                 plash nohdparm --startup-event mountall
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 366320K/393216K available (4952K kernel code, 232K rwdata                                 , 1352K rodata, 131K init, 251K bss, 26896K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0630384   (6305 kB)
[    0.000000]       .init : 0xc0631000 - 0xc0651efc   ( 132 kB)
[    0.000000]       .data : 0xc0652000 - 0xc068c2a8   ( 233 kB)
[    0.000000]        .bss : 0xc068c2a8 - 0xc06cb250   ( 252 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:394
[    0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2                                 147483648000ns
[    0.000052] Switching to timer-based delay loop
[    0.000282] Console: colour dummy device 80x30
[    0.000430] console [tty1] enabled
[    0.000449] Calibrating delay loop (skipped), value calculated using timer fr                                 equency.. 2.00 BogoMIPS (lpj=1000)
[    0.000468] pid_max: default: 32768 minimum: 301
[    0.000601] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000618] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001362] Initializing cgroup subsys memory
[    0.001437] CPU: Testing write buffer coherency: ok
[    0.001821] Setting up static identity map for 0x4bd170 - 0x4bd1a8
[    0.004415] devtmpfs: initialized
[    0.020107] VFP support v0.3: implementor 41 architecture 1 part 20 variant b                                  rev 5
[    0.020497] xor: measuring software checksum speed
[    0.030525]    arm4regs  :  1248.000 MB/sec
[    0.040577]    8regs     :   632.000 MB/sec
[    0.050628]    32regs    :   792.000 MB/sec
[    0.050641] xor: using function: arm4regs (1248.000 MB/sec)
[    0.052790] NET: Registered protocol family 16
[    0.058077] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.058649] cpuidle: using governor menu
[    0.059310] bcm2708.uart_clock = 3000000
[    0.061133] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.061150] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.061162] mailbox: Broadcom VideoCore Mailbox driver
[    0.061239] bcm2708_vcio: mailbox at f200b880
[    0.061321] bcm_power: Broadcom power driver
[    0.061336] bcm_power_open() -> 0
[    0.061344] bcm_power_request(0, 8)
[    0.562044] bcm_mailbox_read -> 00000080, 0
[    0.562059] bcm_power_request -> 0
[    0.562166] Serial: AMBA PL011 UART driver
[    0.562294] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a                                  PL011 rev3
[    0.606377] raid6: int32x1     50 MB/s
[    0.624268] raid6: int32x2     85 MB/s
[    0.641396] raid6: int32x4     78 MB/s
[    0.658444] raid6: int32x8     62 MB/s
[    0.658461] raid6: using algorithm int32x2 (85 MB/s)
[    0.658472] raid6: using intx1 recovery algorithm
[    0.659281] SCSI subsystem initialized
[    0.659533] usbcore: registered new interface driver usbfs
[    0.659637] usbcore: registered new interface driver hub
[    0.659882] usbcore: registered new device driver usb
[    0.661987] Switched to clocksource stc
[    0.675210] NET: Registered protocol family 2
[    0.676320] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.676433] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.676509] TCP: Hash tables configured (established 4096 bind 4096)
[    0.676590] TCP: reno registered
[    0.676613] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.676643] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.676895] NET: Registered protocol family 1
[    0.677409] RPC: Registered named UNIX socket transport module.
[    0.677432] RPC: Registered udp transport module.
[    0.677441] RPC: Registered tcp transport module.
[    0.677450] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.678826] bcm2708_dma: DMA manager at f2007000
[    0.678961] bcm2708_gpio: bcm2708_gpio_probe c065bba0
[    0.679419] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000                                 000(512 MiB)
[    0.680552] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.690096] zbud: loaded
[    0.690766] VFS: Disk quotas dquot_6.5.2
[    0.691123] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.694208] NFS: Registering the id_resolver key type
[    0.694336] Key type id_resolver registered
[    0.694351] Key type id_legacy registered
[    0.694380] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.695394] msgmni has been set to 747
[    0.697463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                 50)
[    0.697488] io scheduler noop registered
[    0.697500] io scheduler deadline registered
[    0.697791] io scheduler cfq registered (default)
[    0.699192] BCM2708FB: allocated DMA memory 57400000
[    0.699256] BCM2708FB: allocated DMA channel 0 @ f2007000
[    0.733696] Console: switching to colour frame buffer device 228x61
[    0.748704] uart-pl011 dev:f1: no DMA platform data
[    0.750504] usbcore: registered new interface driver smsc95xx
[    0.750574] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.950765] Core Release: 2.80a
[    0.950790] Setting default values for core params
[    0.950834] Finished setting default values for core params
[    1.151047] Using Buffer DMA mode
[    1.151069] Periodic Transfer Interrupt Enhancement - disabled
[    1.151079] Multiprocessor Interrupt Enhancement - disabled
[    1.151090] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.151107] Dedicated Tx FIFOs mode
[    1.151553] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xd74                                 14000 dma = 0x57414000 len=9024
[    1.151591] FIQ FSM acceleration enabled for :
[    1.151591] Non-periodic Split Transactions
[    1.151591] Periodic Split Transactions
[    1.151591] High-Speed Isochronous Endpoints
[    1.151617] dwc_otg: Microframe scheduler enabled
[    1.151676] WARN::hcd_init:473: FIQ at 0xc0391644
[    1.151695] WARN::hcd_init:474: FIQ ASM at 0xc03919c0 length 36
[    1.151723] WARN::hcd_init:500: MPHI regs_base at 0xd8810000
[    1.151752] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.151807] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number                                  1
[    1.151861] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.151899] Init: Port Power? op_state=1
[    1.151909] Init: Power Port (0)
[    1.152224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.152248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                 1
[    1.152263] usb usb1: Product: DWC OTG Controller
[    1.152277] usb usb1: Manufacturer: Linux 3.15.8+ dwc_otg_hcd
[    1.152290] usb usb1: SerialNumber: bcm2708_usb
[    1.153162] hub 1-0:1.0: USB hub found
[    1.153243] hub 1-0:1.0: 1 port detected
[    1.153720] dwc_otg: FIQ enabled
[    1.153739] dwc_otg: NAK holdoff enabled
[    1.153748] dwc_otg: FIQ split-transaction FSM enabled
[    1.153772] Module dwc_common_port init
[    1.154297] usbcore: registered new interface driver usb-storage
[    1.154646] mousedev: PS/2 mouse device common for all mice
[    1.155593] bcm2835-cpufreq: min=700000 max=900000 cur=700000
[    1.155793] bcm2835-cpufreq: switching to governor performance
[    1.155814] bcm2835-cpufreq: switching to governor performance
[    1.157216] sdhci: Secure Digital Host Controller Interface driver
[    1.157231] sdhci: Copyright(c) Pierre Ossman
[    1.157315] sdhci: Enable low-latency mode
[    1.157496] mmc0: no vqmmc regulator found
[    1.157514] mmc0: no vmmc regulator found
[    1.187036] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor                                 m's DMA
[    1.187266] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    1.187375] ledtrig-cpu: registered to indicate activity on CPUs
[    1.187510] hidraw: raw HID events driver (C) Jiri Kosina
[    1.187781] usbcore: registered new interface driver usbhid
[    1.187795] usbhid: USB HID core driver
[    1.188086] NET: Registered protocol family 17
[    1.188264] Key type dns_resolver registered
[    1.189721] zswap: loading zswap
[    1.189825] zswap: using lz4 compressor
[    1.198690] Btrfs loaded
[    1.200905] Waiting for root device /dev/mmcblk0p2...
[    1.249566] mmc0: read SD Status register (SSR) after 2 attempts
[    1.254518] mmc0: new high speed SDHC card at address b368
[    1.255112] mmcblk0: mmc0:b368 00000 15.0 GiB
[    1.258359]  mmcblk0: p1 p2 p3
[    1.302822] BTRFS: device label xbian-beta2 devid 1 transid 24004 /dev/root
[    1.306436] BTRFS info (device mmcblk0p2): enabling auto defrag
[    1.306487] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    1.353366] Indeed it is in host mode hprt0 = 00021501
[    1.434608] BTRFS: detected SSD devices, enabling SSD mode
[    1.458681] VFS: Mounted root (btrfs filesystem) on device 0:13.
[    1.461805] devtmpfs: mounted
[    1.462387] Freeing unused kernel memory: 128K (c0631000 - c0651000)
[    1.515319] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.515507] Indeed it is in host mode hprt0 = 00001101
[    1.695614] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    1.695661] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.696611] hub 1-1:1.0: USB hub found
[    1.696781] hub 1-1:1.0: 3 ports detected
[    1.776963] random: nonblocking pool is initialized
[    1.972334] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.056586] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.056616] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber                                 =0
[    2.059621] smsc95xx v1.0.4
[    2.101502] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1                                 .1, smsc95xx USB 2.0 Ethernet, b8:27:eb:97:6a:f4
[    2.177250] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    2.269702] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=ad02
[    2.269732] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber                                 =0
[    2.365373] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-                                 1.3/1-1.3:1.0/0003:1D57:AD02.0001/input/input0
[    2.379548] hid-generic 0003:1D57:AD02.0001: input,hiddev0,hidraw0: USB HID v                                 1.10 Keyboard [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input0
[    2.443443] input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-                                 1.3/1-1.3:1.1/0003:1D57:AD02.0002/input/input1
[    2.448267] hid-generic 0003:1D57:AD02.0002: input,hiddev0,hidraw1: USB HID v                                 1.10 Mouse [HID 1d57:ad02] on usb-bcm2708_usb-1.3/input1
[    4.140156] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    7.503573] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.774276] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data                                  may be corrupt. Please run fsck.
[    9.116080] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E                                 1
[    9.531154] vchiq: vchiq_init_state: slot_zero = 0xd7080000, is_master = 0
[    9.537488] bcm2835-cpufreq: switching to governor powersave
[    9.537523] bcm2835-cpufreq: switching to governor powersave
[    9.546065] bcm2835-cpufreq: switching to governor performance
[    9.546101] bcm2835-cpufreq: switching to governor performance
[   11.102365] udevd[656]: starting version 175
[   14.285717] init: failsafe main process (59) killed by TERM signal
[  109.817724] init: wait-for-state (zram-swapxbmc-done) main process (929) kill                                 ed by TERM signal
[  111.537324] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 acro                                 ss:250876k SSFS
[  111.679918] bcm2835-cpufreq: switching to governor powersave
[  111.679954] bcm2835-cpufreq: switching to governor powersave
[  111.681921] bcm2835-cpufreq: switching to governor performance
[  111.681959] bcm2835-cpufreq: switching to governor performance
[  111.807211] init: xbian-failaccess main process (183) killed by TERM signal
root@xbian:/home/xbian#


Edited for sanity.
Find all posts by this user
Quote this message in a reply
« Next Oldest | Next Newest »
Post Reply 


Messages In This Thread
Beta 1.2 -> RC 2 - syco - 23rd Sep, 2014, 07:41 PM
RE: Beta 1.2 -> RC 2 - CurlyMo - 23rd Sep, 2014, 07:45 PM
RE: Beta 1.2 -> RC 2 - syco - 24th Sep, 2014, 02:39 AM
RE: Beta 1.2 -> RC 2 - syco - 25th Sep, 2014, 10:56 PM
RE: Beta 1.2 -> RC 2 - eliafino - 29th Sep, 2014, 07:12 PM
RE: Beta 1.2 -> RC 2 - syco - 29th Sep, 2014, 09:53 PM
RE: Beta 1.2 -> RC 2 - eliafino - 30th Sep, 2014, 01:03 AM
RE: Beta 1.2 -> RC 2 - syco - 30th Sep, 2014, 01:27 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 30th Sep, 2014, 01:30 AM
RE: Beta 1.2 -> RC 2 - syco - 30th Sep, 2014, 11:02 PM
RE: Beta 1.2 -> RC 2 - syco - 30th Sep, 2014, 04:44 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 30th Sep, 2014, 11:46 PM
RE: Beta 1.2 -> RC 2 - syco - 30th Sep, 2014, 11:57 PM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 12:32 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 01:37 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 01:44 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 01:45 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 02:17 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 02:26 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 02:28 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 02:30 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 02:34 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 02:38 AM
RE: Beta 1.2 -> RC 2 - menakite - 1st Oct, 2014, 03:21 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014 03:59 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 04:10 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 04:27 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 05:00 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 05:53 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 08:18 PM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 06:15 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 06:35 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 07:49 AM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 09:49 AM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 09:20 PM
RE: Beta 1.2 -> RC 2 - syco - 1st Oct, 2014, 10:58 PM
RE: Beta 1.2 -> RC 2 - CurlyMo - 1st Oct, 2014, 11:06 PM

  • View a Printable Version
  • Send this Thread to a Friend
  • Subscribe to this thread
Forum Jump:

Current time: 25th Nov, 2024, 11:21 AM Powered By MyBB, © 2002-2024 MyBB Group.