Alfa AWUS036NH (Ralink RT3070 chipset)

[j4n]

(btw I posted this in the 'peripherals' section accidentally, so I'm reposting it here)

I'm trying to connect my Alfa AWUS036NH (Ralink RT3070 chipset) wifi dongle to my Cubox i4-Pro with no luck I'm running XBian 1.0RC2

Code:

apt-get install firmware-ralink

Doesn't have any effect.

The module doesn't seem to be loaded:

Terminal

xbian@cubox ~ $ lsmod
Module Size Used by
hfsplus 75388 1
loop 11220 2
brcmfmac 125180 0
brcmutil 3240 1 brcmfmac
cfg80211 151576 1 brcmfmac
frandom 3316 2
streamzap 3801 0
redrat3 9644 0
rc_loopback 2196 0
mceusb 11145 0
ir_sony_decoder 1896 0
ir_rc6_decoder 2704 0
ir_rc5_sz_decoder 1504 0
ir_rc5_decoder 1848 0
ir_nec_decoder 2544 0
ir_lirc_codec 3584 0
ir_jvc_decoder 1920 0
imon 19720 0
f2fs 86980 0

Terminal

xbian@cubox ~ $ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 007: ID 059f:100c LaCie, Ltd
Bus 001 Device 006: ID 0480:a007 Toshiba America Info. Systems, Inc. External Disk USB 3.0
Bus 001 Device 005: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 004: ID 04d9:a01c Holtek Semiconductor, Inc.
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

After unplugging and replugging the device:

Terminal

dmesg:
[ 288.770261] usb 1-1.1.3: USB disconnect, device number 5
[ 290.802328] usb 1-1.1.3: new high-speed USB device number 8 using ci_hdrc

Any ideas of where to go from here?