Sony kdl-37s5600 remote

[Esbirraco]

Hellow to all, first sorry for my english.

I have a Sony kdl-37s5600 with RM-ED017 remote and i want use HDMI-CEC but the TV has the HDMI control -> ON and do nothing, i test other HDMI Cable, I readed the TV Manual and the TV had CEC. I have other samsung TV and work perfectly. But i want use the Sony!

I am reading a lot and i can't please helpme!!

I found this but i fail in the step 1:

Quote:Step 1: Is Your Remote Recognized?

Verify that your remote is recognized by LIRC:

xbian@xbian:~# sudo su
root@xbian:~# /etc/init.d/lirc stop
root@xbian:~# mode2
space 989187
pulse 2650
space 894
pulse 467
space 413
pulse 475
space 387
pulse 475
space 866
pulse 483
space 835
pulse 1364
If mode2 doesn’t output anything, then your remote isn’t recognized by the system. Ask for support so we can figure out what the right hardware.conf should be.

If you use GPIO on the Raspberry Pi, add “lirc_rpi gpio_in_pin=#” to /etc/modules. (Replace # with your input pin.) Also, move and rename /etc/lirc/hardware/lirc_rpi.conf to /etc/lirc/hardware.conf.

Sorry if i did something bad i have very bad english.