Threaded Mode | Linear Mode

james85 · 22nd Aug, 2015, 01:49 AM

Terminal

xbian@xbian ~ $ cat /etc/pointercal
307 -24273 48101768 21271 354 -3832164 65536 720 576 1

Stop xbmc command doesn't seem to work

Terminal

xbian@xbian ~ $ sudo stop xbmc
stop: Unknown instance:

As for dmesg command:

Code:

xbian@xbian ~ $ dmesg

[    0.000000] Booting Linux on physical CPU 0xf00

[    0.000000] Linux version 3.18.8+ (root@vps01) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Thu Mar 5 03:13:36 CET 2015

[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine: BCM2709

[    0.000000] cma: Reserved 16 MiB at 0x2e000000

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] On node 0 totalpages: 192512

[    0.000000] free_area_init_node: node 0, pgdat 806e0c40, node_mem_map ada0f000

[    0.000000]   Normal zone: 1504 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 192512 pages, LIFO batch:31

[    0.000000] [bcm2709_smp_init_cpus] enter (8560->f3003010)

[    0.000000] [bcm2709_smp_init_cpus] ncores=4

[    0.000000] PERCPU: Embedded 9 pages/cpu @ad9e6000 s5504 r8192 d23168 u36864

[    0.000000] pcpu-alloc: s5504 r8192 d23168 u36864 alloc=9*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 191008

[    0.000000] Kernel command line: selinux=0 usbcore.autosuspend=-1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=576 bcm2709.boardrev=0xa21041 bcm2709.serial=0x38497b7a smsc95xx.macaddr=B8:27:EB:49:7B:7A bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 739344K/770048K available (5125K kernel code, 270K rwdata, 1424K rodata, 192K init, 263K bss, 30704K reserved)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)

[    0.000000]     vmalloc : 0xaf800000 - 0xff000000   (1272 MB)

[    0.000000]     lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)

[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)

[    0.000000]       .text : 0x80008000 - 0x8066d764   (6550 kB)

[    0.000000]       .init : 0x8066e000 - 0x8069e000   ( 192 kB)

[    0.000000]       .data : 0x8069e000 - 0x806e1a20   ( 271 kB)

[    0.000000]        .bss : 0x806e1a20 - 0x80723694   ( 264 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] NR_IRQS:480

[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).

[    0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns

[    0.000025] Switching to timer-based delay loop, resolution 52ns

[    0.000219] Console: colour dummy device 80x30

[    0.000348] console [tty1] enabled

[    0.000369] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)

[    0.000384] pid_max: default: 32768 minimum: 301

[    0.000525] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000538] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.001397] Initializing cgroup subsys memory

[    0.001452] CPU: Testing write buffer coherency: ok

[    0.001798] missing device node for CPU 0

[    0.001807] missing device node for CPU 1

[    0.001813] missing device node for CPU 2

[    0.001819] missing device node for CPU 3

[    0.001832] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00

[    0.001840] [bcm2709_smp_prepare_cpus] enter

[    0.001917] Setting up static identity map for 0x4de300 - 0x4de334

[    0.016959] [bcm2709_boot_secondary] cpu:1 started (0) 18

[    0.017196] CPU1: Booted secondary processor

[    0.017202] [bcm2709_secondary_init] enter cpu:1

[    0.017234] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01

[    0.017632] [bcm2709_boot_secondary] cpu:2 started (0) 17

[    0.017796] CPU2: Booted secondary processor

[    0.017799] [bcm2709_secondary_init] enter cpu:2

[    0.017820] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02

[    0.018110] [bcm2709_boot_secondary] cpu:3 started (0) 17

[    0.018259] CPU3: Booted secondary processor

[    0.018263] [bcm2709_secondary_init] enter cpu:3

[    0.018282] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03

[    0.018322] Brought up 4 CPUs

[    0.018340] SMP: Total of 4 processors activated (153.00 BogoMIPS).

[    0.018346] CPU: All CPU(s) started in SVC mode.

[    0.018406] LOCALITY CPU 0 to 1: 2

[    0.018413] LOCALITY CPU 0 to 2: 2

[    0.018419] LOCALITY CPU 0 to 3: 2

[    0.018426] LOCALITY CPU 1 to 2: 2

[    0.018432] LOCALITY CPU 1 to 3: 2

[    0.018438] LOCALITY CPU 2 to 3: 2

[    0.018819] devtmpfs: initialized

[    0.032775] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5

[    0.033600] xor: measuring software checksum speed

[    0.066847]    arm4regs  :  1249.200 MB/sec

[    0.100220]    8regs     :   792.000 MB/sec

[    0.133594]    32regs    :   729.600 MB/sec

[    0.166970]    neon      :  1162.800 MB/sec

[    0.166978] xor: using function: arm4regs (1249.200 MB/sec)

[    0.167005] pinctrl core: initialized pinctrl subsystem

[    0.167513] NET: Registered protocol family 16

[    0.172372] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.173339] bcm2709.uart_clock = 3000000

[    0.174735] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.174745] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.174767] mailbox: Broadcom VideoCore Mailbox driver

[    0.174846] bcm2708_vcio: mailbox at f300b880

[    0.175086] bcm_power: Broadcom power driver

[    0.175096] bcm_power_open() -> 0

[    0.175103] bcm_power_request(0, 8)

[    0.675745] bcm_mailbox_read -> 00000080, 0

[    0.675752] bcm_power_request -> 0

[    0.675836] Serial: AMBA PL011 UART driver

[    0.675927] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3

[    0.767923] raid6: int32x1    134 MB/s

[    0.824870] raid6: int32x2    173 MB/s

[    0.881548] raid6: int32x4    182 MB/s

[    0.938226] raid6: int32x8    179 MB/s

[    0.994813] raid6: neonx1     428 MB/s

[    1.051532] raid6: neonx2     580 MB/s

[    1.108305] raid6: neonx4     704 MB/s

[    1.165037] raid6: neonx8     645 MB/s

[    1.165044] raid6: using algorithm neonx4 (704 MB/s)

[    1.165051] raid6: using intx1 recovery algorithm

[    1.165546] SCSI subsystem initialized

[    1.165697] usbcore: registered new interface driver usbfs

[    1.165758] usbcore: registered new interface driver hub

[    1.165855] usbcore: registered new device driver usb

[    1.167411] Switched to clocksource arch_sys_counter

[    1.174004] NET: Registered protocol family 2

[    1.174816] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    1.174900] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    1.175027] TCP: Hash tables configured (established 8192 bind 8192)

[    1.175111] TCP: reno registered

[    1.175124] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    1.175174] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    1.175407] NET: Registered protocol family 1

[    1.175662] RPC: Registered named UNIX socket transport module.

[    1.175672] RPC: Registered udp transport module.

[    1.175679] RPC: Registered tcp transport module.

[    1.175685] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.177327] bcm2708_dma: DMA manager at f3007000

[    1.177464] bcm2708_gpio: bcm2708_gpio_probe 806bf4e8

[    1.177866] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)

[    1.178716] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    1.184841] zpool: loaded

[    1.184856] zbud: loaded

[    1.185406] VFS: Disk quotas dquot_6.5.2

[    1.185578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    1.187576] NFS: Registering the id_resolver key type

[    1.187634] Key type id_resolver registered

[    1.187641] Key type id_legacy registered

[    1.187667] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[    1.188330] msgmni has been set to 1476

[    1.189463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    1.189482] io scheduler noop registered

[    1.189493] io scheduler deadline registered

[    1.189658] io scheduler cfq registered

[    1.189820] io scheduler bfq registered (default)

[    1.189827] BFQ I/O-scheduler version: v7r7

[    1.191037] BCM2708FB: allocated DMA memory ee400000

[    1.191070] BCM2708FB: allocated DMA channel 0 @ f3007000

[    1.196867] Console: switching to colour frame buffer device 90x36

[    1.200425] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver

[    1.200610] uart-pl011 dev:f1: no DMA platform data

[    1.201727] usbcore: registered new interface driver smsc95xx

[    1.201761] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    1.401904] Core Release: 2.80a

[    1.401916] Setting default values for core params

[    1.401952] Finished setting default values for core params

[    1.602190] Using Buffer DMA mode

[    1.602199] Periodic Transfer Interrupt Enhancement - disabled

[    1.602205] Multiprocessor Interrupt Enhancement - disabled

[    1.602212] OTG VER PARAM: 0, OTG VER FLAG: 0

[    1.602223] Dedicated Tx FIFOs mode

[    1.602445] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae414000 dma = 0xee414000 len=9024

[    1.602474] FIQ FSM acceleration enabled for :

[    1.602474] Non-periodic Split Transactions

[    1.602474] Periodic Split Transactions

[    1.602474] High-Speed Isochronous Endpoints

[    1.602489] dwc_otg: Microframe scheduler enabled

[    1.602524] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803ad53c

[    1.602535] WARN::hcd_init_fiq:413: FIQ ASM at 0x803ad86c length 36

[    1.602547] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf812000

[    1.602564] dwc_otg bcm2708_usb: DWC OTG Controller

[    1.602595] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1

[    1.602630] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000

[    1.602674] Init: Port Power? op_state=1

[    1.602680] Init: Power Port (0)

[    1.602866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.602878] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.602889] usb usb1: Product: DWC OTG Controller

[    1.602898] usb usb1: Manufacturer: Linux 3.18.8+ dwc_otg_hcd

[    1.602908] usb usb1: SerialNumber: bcm2708_usb

[    1.603425] hub 1-0:1.0: USB hub found

[    1.603462] hub 1-0:1.0: 1 port detected

[    1.603731] dwc_otg: FIQ enabled

[    1.603739] dwc_otg: NAK holdoff enabled

[    1.603744] dwc_otg: FIQ split-transaction FSM enabled

[    1.603766] Module dwc_common_port init

[    1.603955] usbcore: registered new interface driver usb-storage

[    1.604160] mousedev: PS/2 mouse device common for all mice

[    1.604738] bcm2835-cpufreq: min=600000 max=900000

[    1.604950] sdhci: Secure Digital Host Controller Interface driver

[    1.604957] sdhci: Copyright(c) Pierre Ossman

[    1.605068] DMA channels allocated for the MMC driver

[    1.630756] Load BCM2835 MMC driver

[    1.630866] ledtrig-cpu: registered to indicate activity on CPUs

[    1.630961] hidraw: raw HID events driver (C) Jiri Kosina

[    1.631144] usbcore: registered new interface driver usbhid

[    1.631150] usbhid: USB HID core driver

[    1.632434] NET: Registered protocol family 17

[    1.634622] Key type dns_resolver registered

[    1.635280] Registering SWP/SWPB emulation handler

[    1.635727] zswap: loading zswap

[    1.635736] zpool: creating pool type zbud

[    1.635747] zpool: created zbud pool

[    1.635754] zswap: using zbud pool

[    1.635795] zswap: using lz4 compressor

[    1.637479] Btrfs loaded

[    1.637991] Waiting for root device /dev/mmcblk0p2...

[    1.683255] mmc0: host does not support reading read-only switch, assuming write-enable

[    1.686924] mmc0: new high speed SDHC card at address e624

[    1.687227] mmcblk0: mmc0:e624 SS04G 3.69 GiB

[    1.689027]  mmcblk0: p1 p2 p3

[    1.741868] BTRFS: device label xbian devid 1 transid 1833 /dev/root

[    1.743376] BTRFS info (device mmcblk0p2): enabling auto defrag

[    1.743401] BTRFS info (device mmcblk0p2): disk space caching is enabled

[    1.743408] BTRFS: has skinny extents

[    1.782550] BTRFS: detected SSD devices, enabling SSD mode

[    1.800836] Indeed it is in host mode hprt0 = 00021501

[    1.810798] VFS: Mounted root (btrfs filesystem) on device 0:12.

[    1.812571] devtmpfs: mounted

[    1.812803] Freeing unused kernel memory: 192K (8066e000 - 8069e000)

[    1.812810] BFS CPU scheduler v0.460 by Con Kolivas.

[    1.967510] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.967641] Indeed it is in host mode hprt0 = 00001101

[    2.138760] random: init urandom read with 35 bits of entropy available

[    2.147692] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[    2.147709] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.148302] hub 1-1:1.0: USB hub found

[    2.148385] hub 1-1:1.0: 5 ports detected

[    2.427620] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    2.521050] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    2.521070] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.523809] smsc95xx v1.0.4

[    2.566511] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:49:7b:7a

[    2.644298] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

[    2.754681] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370

[    2.754700] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    2.754711] usb 1-1.2: Product: 802.11 n WLAN

[    2.754721] usb 1-1.2: Manufacturer: Ralink

[    2.754730] usb 1-1.2: SerialNumber: 1.0

[    2.834180] usb 1-1.3: new low-speed USB device number 5 using dwc_otg

[    2.941563] usb 1-1.3: New USB device found, idVendor=0eef, idProduct=0001

[    2.941582] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.941597] usb 1-1.3: Product: USB TouchController

[    2.941610] usb 1-1.3: Manufacturer: eGalax Inc.

[    3.024174] usb 1-1.4: new low-speed USB device number 6 using dwc_otg

[    3.140343] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2112

[    3.140362] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    3.140377] usb 1-1.4: Product: Dell USB Wired Multimedia Keyboard

[    3.140391] usb 1-1.4: Manufacturer: DELL

[    3.152493] input: DELL Dell USB Wired Multimedia Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2112.0001/input/input0

[    3.152925] hid-generic 0003:413C:2112.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Wired Multimedia Keyboard] on usb-bcm2708_usb-1.4/input0

[    3.174199] input: DELL Dell USB Wired Multimedia Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2112.0002/input/input1

[    3.174597] hid-generic 0003:413C:2112.0002: input,hidraw1: USB HID v1.10 Device [DELL Dell USB Wired Multimedia Keyboard] on usb-bcm2708_usb-1.4/input1

[    8.871918] random: nonblocking pool is initialized

[    9.274713] BTRFS info (device mmcblk0p2): disk space caching is enabled

[   10.251711] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[   10.279520] init: xbian-failaccess main process (235) killed by TERM signal

[   10.917802] vchiq: vchiq_init_state: slot_zero = 0xae000000, is_master = 0

[   11.094112] udevd[689]: starting version 175

[   11.309136] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated

[   11.309942] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80)

[   11.321010] bcm2708_i2c_init_pinmode(1,2)

[   11.321027] bcm2708_i2c_init_pinmode(1,3)

[   11.321619] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)

[   11.376780] input: eGalax Inc. USB TouchController as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2

[   11.377260] usbcore: registered new interface driver usbtouchscreen

[   11.447733] cfg80211: Calling CRDA to update world regulatory domain

[   11.609504] init: failsafe main process (96) killed by TERM signal

[   11.614324] usb 1-1.2: reset high-speed USB device number 4 using dwc_otg

[   11.682812] pcm512x 1-004d: Failed to reset device: -5

[   11.682869] pcm512x: probe of 1-004d failed with error -5

[   11.683149] pcm512x 1-004c: Failed to reset device: -5

[   11.683189] pcm512x: probe of 1-004c failed with error -5

[   11.718483] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected

[   11.753085] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected

[   11.791641] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[   11.793309] usbcore: registered new interface driver rt2800usb

[   12.684173] frandom: Seeded global generator now (used by erandom)

[   12.689659] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'

[   12.695733] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29

[   13.328472] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[   14.338351] wlan0: authenticate with 74:9d:dc:67:85:01

[   14.364789] wlan0: send auth to 74:9d:dc:67:85:01 (try 1/3)

[   14.381041] wlan0: authenticated

[   14.381527] rt2800usb 1-1.2:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP

[   14.381543] rt2800usb 1-1.2:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP

[   14.384178] wlan0: associate with 74:9d:dc:67:85:01 (try 1/3)

[   14.395178] wlan0: RX AssocResp from 74:9d:dc:67:85:01 (capab=0x431 status=0 aid=2)

[   14.400758] wlan0: associated

[   14.400884] cfg80211: Calling CRDA to update world regulatory domain

[   17.478756] wlan0: deauthenticated from 74:9d:dc:67:85:01 (Reason: 2=PREV_AUTH_NOT_VALID)

[   17.501990] cfg80211: Calling CRDA for country: US

[   18.787854] wlan0: authenticate with 74:9d:dc:67:85:01

[   18.811095] wlan0: send auth to 74:9d:dc:67:85:01 (try 1/3)

[   18.924090] wlan0: send auth to 74:9d:dc:67:85:01 (try 2/3)

[   18.935664] wlan0: authenticated

[   18.936022] rt2800usb 1-1.2:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP

[   18.936037] rt2800usb 1-1.2:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP

[   18.937432] wlan0: associate with 74:9d:dc:67:85:01 (try 1/3)

[   18.955258] wlan0: RX AssocResp from 74:9d:dc:67:85:01 (capab=0x431 status=0 aid=2)

[   18.960642] wlan0: associated

[   22.960540] init: wait-for-state (xbmcxbmc-loaded) main process (1260) killed by TERM signal

[   30.037035] init: xbmc-failed-start main process (530) killed by TERM signal

[   30.069923] init: wait-for-state (zram-swapxbmc-done) main process (1082) killed by TERM signal

[   30.256124] Adding 251388k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:251388k SSFS

[   30.400308] init: uimapper main process (949) terminated with status 1

[   30.400472] init: uimapper main process ended, respawning

[   31.923983] init: uimapper main process (1967) terminated with status 1

[   31.924220] init: uimapper main process ended, respawning

[   32.483530] init: uimapper main process (1977) terminated with status 1

[   32.483709] init: uimapper main process ended, respawning

[   32.897101] init: uimapper main process (1987) terminated with status 1

[   32.897269] init: uimapper main process ended, respawning

[   33.317934] init: uimapper main process (1997) terminated with status 1

[   33.318116] init: uimapper main process ended, respawning

[   33.940483] init: uimapper main process (2007) terminated with status 1

[   33.940682] init: uimapper main process ended, respawning

[   34.380159] init: uimapper main process (2017) terminated with status 1

[   34.380318] init: uimapper main process ended, respawning

[   34.976731] init: uimapper main process (2027) terminated with status 1

[   34.976887] init: uimapper main process ended, respawning

[   35.632760] init: uimapper main process (2037) terminated with status 1

[   35.633013] init: uimapper main process ended, respawning

[   36.113351] init: uimapper main process (2140) terminated with status 1

[   36.113503] init: uimapper main process ended, respawning

[   37.245030] init: uimapper main process (2234) terminated with status 1

[   37.245210] init: uimapper main process ended, respawning

[   38.506391] init: uimapper main process (2245) terminated with status 1

[   38.506546] init: uimapper main process ended, respawning

[   39.149869] init: uimapper main process (2255) terminated with status 1

[   39.150019] init: uimapper main process ended, respawning

[   39.543512] init: uimapper main process (2287) terminated with status 1

[   39.543704] init: uimapper main process ended, respawning

[   39.916653] init: uimapper main process (2297) terminated with status 1

[   39.916801] init: uimapper main process ended, respawning

[   40.286596] init: uimapper main process (2307) terminated with status 1

[   40.286749] init: uimapper main process ended, respawning

[   41.007188] init: uimapper main process (2317) terminated with status 1

[   41.007351] init: uimapper main process ended, respawning

[   51.775672] init: wait-for-state (kill-splashxbmc-exits) main process (2468) killed by TERM signal

Hopefully this is useful. I'm not sure what I'm looking at here but I'm going to look more closely to see if I can find some kind of error. And thanks for that link, I've been reading a lot and it's actually a lot more interesting than I thought it would be.

Possibly Related Threads...
Thread:		Author	Replies	Views:	Last Post
	touchscreen egalax + movie demonstration	themad06	1	8,556	10th Jul, 2013 01:52 AM Last Post: Markamc