Installing wiringpi ?

[Skywatch]

Just a quick update. A fresh try and now wiringpi is installed.

With fancontrol loaded it still silences the I2S sound output though.

That is because the PWM fancontrol script was outputting PWM to pin 12 (physical) for the fan. Only problem is that it is the very same pin used for I2S dac clock!

IF I disable the call to the fancontrol script in /etc/rc.local then it all goes back to working again, so that is clearly the issue.

A little research and I discovered that there are two HW PWM pins on Pi2 so I decided to try and get the fan output on the second PWM pin (physical 13). I changed it in wiringpi, but no luck. For some reason it still outputs on pin 12. I have emailed the issue to Gordon at wiringpi and will see what he makes of it!