[PROBLEM] TV is waked up by Xbian after TV shutdown

[HugoG]

I have some issue with CEC using lastest xbian version on RPI 2

Software
XBian version: xbian 20150911-3
XBMC/Kodi version: Kodi 15.2-RC2 git:2015-03-13-2d0c3cf
Overclock settings: 900

Hardware
Device type and model (e.g. Raspberry Pi Model A/B 256/512 MB, CuBox-i i4Pro, ...): Rpi 2
Power supply rating: http://www.amazon.fr/Aukru%C2%AE-Alimentation-Chargeur-Adaptateur-Raspberry/dp/B00U88KSHO/ref=pd_bxgy_147_img_y
SD card size and make/type: Samsung 32 Go Pro MicroSDHC UHS-I Grade 1 Classe 10
Network (Ethernet or wireless): ethernet
Connected devices (TV, USB, network storage, ...): Philips TV + usb drive via powered hub

CEC Setting : ignore init : true, other setting is default settings.
It's a fresh install of Xbian from yesterday, I was using xbian for 2 years on rpi 1.

Problem description:
1. I shut down the tv with the remote power button
2. TV is shutted down
3. Xbian wake up the TV, the TV is now ON (and it shoundn't !)

Log files
Here is the cec-client log just after powering off the TV :

Code:

TRAFFIC: [           41763]     >> 0f:36
DEBUG:   [           41763]     TV (0): power status changed from 'on' to 'standby'
DEBUG:   [           41764]     >> TV (0) -> Broadcast (F): standby (36)
DEBUG:   [           46663]     GetPhysicalAddress - physical address = 1100
NOTICE:  [           46664]     physical address changed to 1100
DEBUG:   [           46664]     physical address unchanged (1100)
WARNING: [           56730]     unhandled response received: opcode=8f initiator=1 destination=0 response=0
TRAFFIC: [           56810]     >> 01:90:01
DEBUG:   [           56810]     >> TV (0) -> Recorder 1 (1): report power status (90)
WARNING: [           61873]     unhandled response received: opcode=4 initiator=1 destination=0 response=0
WARNING: [           61993]     unhandled response received: opcode=82 initiator=1 destination=f response=0
DEBUG:   [           62566]     GetPhysicalAddress - physical address = 1100
NOTICE:  [           62567]     physical address changed to 1100
DEBUG:   [           62567]     physical address unchanged (1100)
WARNING: [           66792]     unhandled response received: opcode=8f initiator=1 destination=0 response=0
TRAFFIC: [           66871]     >> 01:90:02
DEBUG:   [           66871]     TV (0): power status changed from 'standby' to 'in transition from standby to on'
DEBUG:   [           66871]     >> TV (0) -> Recorder 1 (1): report power status (90)
TRAFFIC: [           70980]     >> 0f:84:00:00:00
DEBUG:   [           70980]     << Recorder 1 (1) -> broadcast (F): physical adddress 1100
TRAFFIC: [           70981]     << 1f:84:11:00:01
DEBUG:   [           70981]     >> TV (0) -> Broadcast (F): report physical address (84)
DEBUG:   [           71017]     GetPhysicalAddress - physical address = 1100
NOTICE:  [           71018]     physical address changed to 1100
DEBUG:   [           71131]     physical address unchanged (1100)
WARNING: [           71281]     unhandled response received: opcode=84 initiator=1 destination=f response=0
TRAFFIC: [           71386]     >> 0f:87:00:90:3e
DEBUG:   [           71387]     TV (0): power status changed from 'in transition from standby to on' to 'on'
DEBUG:   [           71387]     << Recorder 1 (1) -> Broadcast (F): vendor id Philips (903e)
TRAFFIC: [           71387]     << 1f:87:00:15:82
DEBUG:   [           71388]     >> TV (0) -> Broadcast (F): device vendor id (87)
WARNING: [           71687]     unhandled response received: opcode=87 initiator=1 destination=f response=0
DEBUG:   [           71916]     GetPhysicalAddress - physical address = 1000
NOTICE:  [           71916]     physical address changed to 1000
DEBUG:   [           71916]     setting physical address to '1000'
DEBUG:   [           71916]     marking Recorder 1 (1) as inactive source
NOTICE:  [           71917]     >> source deactivated: Recorder 1 (1)
DEBUG:   [           71917]     Recorder 1 (1): physical address changed from 1100 to 1000
DEBUG:   [           71917]     << Recorder 1 (1) -> broadcast (F): physical adddress 1000
TRAFFIC: [           71917]     << 1f:84:10:00:01
DEBUG:   [           72068]     making Recorder 1 (1) the active source
NOTICE:  [           72069]     >> source activated: Recorder 1 (1)
DEBUG:   [           72070]     sending active source message for 'Recorder 1'
NOTICE:  [           72070]     << powering on 'TV' (0)
TRAFFIC: [           72070]     << 10:04
WARNING: [           72307]     unhandled response received: opcode=84 initiator=1 destination=f response=0
NOTICE:  [           72367]     << Recorder 1 (1) -> broadcast (F): active source (1000)
TRAFFIC: [           72368]     << 1f:82:10:00
WARNING: [           72468]     unhandled response received: opcode=4 initiator=1 destination=0 response=0
DEBUG:   [           72578]     << Recorder 1 (1) -> TV (0): menu state 'activated'
TRAFFIC: [           72580]     << 10:8e:00
WARNING: [           72697]     unhandled response received: opcode=82 initiator=1 destination=f response=0
WARNING: [           72757]     unhandled response received: opcode=4 initiator=1 destination=0 response=0
DEBUG:   [           72848]     GetPhysicalAddress - physical address = 1100
NOTICE:  [           72848]     physical address changed to 1100
DEBUG:   [           72848]     setting physical address to '1100'
DEBUG:   [           72848]     marking Recorder 1 (1) as inactive source
NOTICE:  [           72848]     >> source deactivated: Recorder 1 (1)
DEBUG:   [           72848]     Recorder 1 (1): physical address changed from 1000 to 1100
DEBUG:   [           72848]     << Recorder 1 (1) -> broadcast (F): physical adddress 1100
TRAFFIC: [           72848]     << 1f:84:11:00:01
WARNING: [           72967]     unhandled response received: opcode=82 initiator=1 destination=f response=0
DEBUG:   [           73209]     making Recorder 1 (1) the active source
NOTICE:  [           73209]     >> source activated: Recorder 1 (1)
DEBUG:   [           73209]     sending active source message for 'Recorder 1'
NOTICE:  [           73209]     << powering on 'TV' (0)
TRAFFIC: [           73211]     >> 01:00:8e:00

Also, I've notice a notification after tv is waked up but cannot read it before it's dismiss, if you have clue about it it's welcome.

Thank you for your help,

Hugo