[SOLVED] Haupagge MCE Remote does not work

[Nachteule]

WTF

One more idea (I got last night):
Everything is working, but a proper Lircmap.xml is missing.

So, please do following (with still disabled local IR receiver in a SSH session:

Phase 1:

1) make sure that lirc is started
2) make sure that device /dev/lirc0 is available
3) start irw
4) hit some buttons on your remote control

You have to see an output like this:

Code:

root@kmxbimx / # stop lirc
lirc stop/waiting
root@kmxbimx / # ls -la /dev/lirc0
crw-rw---- 1 root video 237, 0 Mär  3 12:31 /dev/lirc0
root@kmxbimx / # start lirc
lirc start/running
root@kmxbimx / # irw
0000001455800000 00 KEY_MUTE X10-OR32E
00000014e9140000 00 KEY_8 X10-OR32E
0000001466910000 00 KEY_5 X10-OR32E
000000146a950000 00 KEY_9 X10-OR32E
0000001468930000 00 KEY_7 X10-OR32E
00000014e5100000 00 KEY_4 X10-OR32E
0000001466910000 00 KEY_5 X10-OR32E
00000014e9140000 00 KEY_8 X10-OR32E
0000001468930000 00 KEY_7 X10-OR32E
00000014e5100000 00 KEY_4 X10-OR32E
0000001466910000 00 KEY_5 X10-OR32E
00000014e7120000 00 KEY_6 X10-OR32E
^C
root@kmxbimx / #

If you get an output, we can continue with Phase 2

(will be continued)