[SOLVED] linux-image-bcm2836 4.9.58+-1508682881 breaks Xbian, doesn't boot

[naox]

(24th Oct, 2017 11:31 PM)Nachteule Wrote:  @naox

You need a running Linux system for doing that

1) Download and gunzip latest image XBian_Latest_rpi3.img.gz
2) map partitions inside of this image via command sudo kpartx -av XBian_Latest_rpi3.img
3) mount first partition by sudo mount /dev/mapper/loop0p1 /mnt
4) mount you sd-card, hopefully your XBian boot partition will be mounted to /media/xbianboot automatically
5) replace all files of the XBian boot partition (it is not the first partition of the sd-card, because this is the noobs boot partition) which two exceptions:
do not overwrite cmdline.txt and config.txt
6) umount sd-card and reboot Pi
7) when Pi is up again, install older kernel

Another solution could be (the issue seems to be identified/fixed) could be (untested):

1) remove all *.dtb files from XBian boot partition
2) reboot Pi
3) when Pi is up again, install older kernel

Btw, new 4.9.58 kernel packages has been built and successfuly tested

Working again! thanks! )

First method: I needed to connect the raspberry by ethernet.
2nd method: It didn't work for me.