[SOLVED] Kodi 17.6, no more wifi?

[deeej]

(27th Nov, 2017 08:47 AM)Nachteule Wrote:  @deeej

You're confusing me

Please post output of

Code:

sudo iwconfig

and

Code:

sudo ip addr

And you're using onboard WLAN interface of Pi3?

Thank you so much for taking time to help me! Much appriciated!

Im not "Linux Savvy", no connection since wifi doesn´t seem to work. So i had to take a screenshot of the tv. Hope the image isn´t to "fuzzy"...sorry for the "noobinez" :-)

https://imgur.com/vbGlK3J

And yes, no wifi dongle....just the onboard rpi3 wifi.

EDIT: I used a cable to connect directly to the router and logged in with putty here is the output:

Terminal

xbian@xbian ~ $ sudo iwconfig
[sudo] password for xbian:
eth0 no wireless extensions.

lo no wireless extensions.

wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on

xbian@xbian ~ $ sudo ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:27:eb:5c:1b:fc brd ff:ff:ff:ff:ff:ff
inet 192.168.1.118/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether b8:27:eb:09:4e:a9 brd ff:ff:ff:ff:ff:ff
xbian@xbian ~ $