[PROBLEM] Problem updating the system libssl1.1

[Nachteule]

(12th Dec, 2017 04:18 AM)naox Wrote:  

(11th Dec, 2017 07:47 AM)Nachteule Wrote:  How did you checked this?

The problem is, that the sd-card always reports 'everything ok' to the system after write operation. So, the only way to check if sd-card is on read-only mode is to write a file to card, for example by "sudo touch /check-rw" and after rebooting system checking if this file is still there.

I assumed that because the bash history is saved after reboot. I'm going to do some test and I'll come back.

Edit:

I re-confirm, I can write, I created a file and is present after reboot.

Can I do a fsck on reboout with noobs and xbian? I can't find a way to do it.

1) you need attached USB keyboard at your Pi
2) you have to enable initramfs
3) Reboot XBian, when message "To dropdown to shell, press and hold shift on usb attached keyboard...! appears, press left shift key. That will enter rescue mode [1]
4) When in rescue mode, run
rum
btrfs check /dev/root
btrfs check --repair /dev/root

[1] it is a bit tricky to enter rescue mode via shift key. An alternate method is adding rescue to /boot/cmdline.txt like this:

Terminal

root@kmxbilr2 ~ # cat /boot/cmdline.txt
rescue telnet zswap.enabled=1 zswap.compressor=lz4 console=tty1 ......