[SOLVED] ATI remote wonder not working after update

[Chiron]

Good afternoon

since a recent update my ati-remote-wonder is not working anymore
See the last line of this extract, ati_remote is unregistred.

Code:

[    8.799760] lirc_dev: IR Remote Control driver registered, major 243
[    8.803021] IR LIRC bridge handler initialized
[    8.804442] Registered IR keymap rc-rc6-mce
[    8.804780] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0
[    8.805084] input: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0/input0
[    8.811677] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
[    8.834053] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[    9.295714] Registered IR keymap rc-ati-x10
[    9.296000] rc rc1: X10 Wireless Technology Inc USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1
[    9.296269] input: X10 Wireless Technology Inc USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1/input2
[    9.296621] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
[    9.317536] usbcore: registered new interface driver ati_remote
[    9.333131] dvb_usb_af9035 1-1.5:1.0: prechip_version=83 chip_version=02 chip_type=9135
[    9.361354] usb 1-1.5: dvb_usb_v2: found a 'Avermedia A835B(3835)' in cold state
[    9.369540] usb 1-1.5: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[    9.599540] dvb_usb_af9035 1-1.5:1.0: firmware version=3.39.1.0
[    9.599585] usb 1-1.5: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
[    9.599601] dvb_usb_af9035 1-1.5:1.0: [0] overriding tuner from 38 to 60
[    9.600374] usb 1-1.5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    9.600550] dvbdev: DVB: registering new adapter (Avermedia A835B(3835))
[    9.648705] af9033 3-001c: firmware version: LINK 3.39.1.0 - OFDM 3.9.1.0
[    9.648728] af9033 3-001c: Afatech AF9033 successfully attached
[    9.648970] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[    9.677593] it913x it9133bx-tuner.0.auto: ITE IT913X BX successfully attached
[    9.718128] Registered IR keymap rc-it913x-v2
[    9.718448] rc rc2: Avermedia A835B(3835) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc2
[    9.718878] input: Avermedia A835B(3835) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc2/input4
[    9.718933] usb 1-1.5: dvb_usb_v2: schedule remote query interval to 500 msecs
[    9.718957] usb 1-1.5: dvb_usb_v2: 'Avermedia A835B(3835)' successfully initialized and connected
[    9.719485] usbcore: registered new interface driver dvb_usb_af9035
[   12.021525] usb 1-1.5: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
[   12.872965] usbcore: deregistering interface driver ati_remote

I tried to downgrade the kernel with
apt-cache madison linux-image-bcm2836
apt-get install linux-image-bcm2836="4.9.96+-1524776180"

the dmesg output is slightly different but the remote is still not working

Code:

[   13.573643] Registered IR keymap rc-rc6-mce
[   13.575267] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0
[   13.578282] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[   13.601784] lirc_dev: IR Remote Control driver registered, major 244
[   13.607096] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[   13.607118] IR LIRC bridge handler initialized
[   13.623303] IR RC6 protocol handler initialized
[   13.628329] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[   13.819661] dvb_usb_af9035 1-1.5:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   13.821208] usb 1-1.5: dvb_usb_v2: found a 'Avermedia A835B(3835)' in cold state
[   13.838214] usb 1-1.5: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[   13.973642] Registered IR keymap rc-ati-x10
[   13.974598] input: X10 Wireless Technology Inc USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1/input1
[   13.975906] rc rc1: X10 Wireless Technology Inc USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1
[   13.976548] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[   13.977892] usbcore: registered new interface driver ati_remote
[   14.020655] lirc_atiusb: module is from the staging directory, the quality is unknown, you have been warned.
[   14.022676]
               lirc_atiusb: USB remote driver for LIRC $Revision: 1.88 $
[   14.022696] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[   14.022949] usbcore: registered new interface driver lirc_atiusb
[   14.050952] dvb_usb_af9035 1-1.5:1.0: firmware version=3.39.1.0
[   14.051018] usb 1-1.5: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
[   14.053218] dvb_usb_af9035 1-1.5:1.0: [0] overriding tuner from 38 to 60
[   14.055360] usb 1-1.5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   14.055558] DVB: registering new adapter (Avermedia A835B(3835))
[   14.119188] af9033 3-0038: firmware version: LINK 3.39.1.0 - OFDM 3.9.1.0
[   14.119221] af9033 3-0038: Afatech AF9033 successfully attached
[   14.119417] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.180985] it913x 3-001c: ITE IT913X BX successfully attached
[   14.239134] init: failsafe main process (523) killed by TERM signal
[   14.381434] Registered IR keymap rc-it913x-v2
[   14.383481] input: Avermedia A835B(3835) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc2/input3
[   14.395327] rc rc2: Avermedia A835B(3835) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc2
[   14.395363] usb 1-1.5: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.395393] usb 1-1.5: dvb_usb_v2: 'Avermedia A835B(3835)' successfully initialized and connected
[   14.395677] usbcore: registered new interface driver dvb_usb_af9035
[   14.692459] init: xbian-failaccess main process (422) killed by TERM signal
[   17.322170] usb 1-1.5: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
[   18.335064] usbcore: deregistering interface driver ati_remote
[   18.452022] usbcore: deregistering interface driver lirc_atiusb
[   18.629556] lirc_atiusb: module is from the staging directory, the quality is unknown, you have been warned.
[   18.631506]
               lirc_atiusb: USB remote driver for LIRC $Revision: 1.88 $
[   18.631527] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[   18.641422] lirc_atiusb 1-1.3:1.0: lirc_dev: driver lirc_atiusb  registered at minor = 1
[   18.647038] lirc_atiusb[4]: X10 Wireless Technology Inc USB Receiver on usb1:4
[   18.648757] usbcore: registered new interface driver lirc_atiusb

I have checked my config files, everything seems unchanged...
Any idea?