Samsung Anynet+ CEC TV Remote not working

[havilson]

(5th Aug, 2020 07:44 PM)Nachteule Wrote:  

(5th Aug, 2020 10:01 AM)havilson Wrote:  

(5th Aug, 2020 01:46 AM)Nachteule Wrote:  Maybe your hdmi cable, the hdmi connector or the Pi3B+ itself is broken

Ok, I'll try with another hdmi cable. Is there any way that to test if it's the RPi?

Yes, there is:

Stop Kodi and start cec-client (if it is not already installed, you have to install package cec-utils) and connect your TV-Remote with the Pi.

Ok, I couldn't done the hdmi other cable cause my other cable didn't work.
Anyway I did the RPi3B+ test, and here's the result:

Terminal

xbian@xbian ~ $ sudo cec-client
[sudo] password for xbian:
No device type given. Using 'recording device'
CEC Parser created - libCEC version 4.0.4
no serial port given. trying autodetect:
path: Raspberry Pi
com port: RPI

opening a connection to the CEC adapter...
DEBUG: [ 195] Broadcast (F): osd name set to 'Broadcast'
DEBUG: [ 197] Open - vc_cec initialised
DEBUG: [ 196] logical address changed to Free use (e)
NOTICE: [ 197] connection opened
DEBUG: [ 197] processor thread started
DEBUG: [ 197] << Broadcast (F) -> TV (0): POLL
DEBUG: [ 198] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 198] << e0
DEBUG: [ 258] >> POLL sent
DEBUG: [ 258] TV (0): device status changed into 'present'
DEBUG: [ 259] << requesting vendor ID of 'TV' (0)
TRAFFIC: [ 259] << e0:8c
DEBUG: [ 1320] expected response not received (87: device vendor id)
TRAFFIC: [ 1320] << e0:8c
WARNING: [ 2276] unhandled response received: opcode=8f initiator=e destination=0 response=0
DEBUG: [ 2381] expected response not received (87: device vendor id)
NOTICE: [ 2381] registering new CEC client - v4.0.4
DEBUG: [ 2382] detecting logical address for type 'recording device'
DEBUG: [ 2382] trying logical address 'Recorder 1'
DEBUG: [ 2382] << Recorder 1 (1) -> Recorder 1 (1): POLL
TRAFFIC: [ 2382] << 11
TRAFFIC: [ 2652] << 11
DEBUG: [ 2923] >> POLL not sent
DEBUG: [ 2923] using logical address 'Recorder 1'
DEBUG: [ 2923] Recorder 1 (1): device status changed into 'handled by libCEC'
DEBUG: [ 2923] Recorder 1 (1): power status changed from 'unknown' to 'on'
DEBUG: [ 2923] Recorder 1 (1): vendor = Pulse Eight (001582)
DEBUG: [ 2923] Recorder 1 (1): CEC version 1.4
DEBUG: [ 2923] AllocateLogicalAddresses - device '0', type 'recording device', LA '1'
DEBUG: [ 2925] logical address changed to Recorder 1 (1)
DEBUG: [ 2925] Recorder 1 (1): osd name set to 'CECTester'
DEBUG: [ 2925] Recorder 1 (1): menu language set to 'eng'
DEBUG: [ 2925] GetPhysicalAddress - physical address = 3000
DEBUG: [ 2925] AutodetectPhysicalAddress - autodetected physical address '3000'
DEBUG: [ 2925] Recorder 1 (1): physical address changed from ffff to 3000
DEBUG: [ 2925] << Recorder 1 (1) -> broadcast (F): physical address 3000
TRAFFIC: [ 2925] << 1f:84:30:00:01
NOTICE: [ 3076] CEC client registered: libCEC version = 4.0.4, client version = 4.0.4, firmware version = 1, logical address(es) = Recorder 1 (1) , physical address: 3.0.0.0, git revision: heads/masterv4, compiled on Do 15. Aug 21:09:58 UTC 2019 by manfred@kmcubie.kmhome.com on Linux 4.9.106+ (armv7l), features: P8_USB, DRM, P8_detect, 'RPi'
DEBUG: [ 3077] << Recorder 1 (1) -> TV (0): OSD name 'CECTester'
TRAFFIC: [ 3077] << 10:47:43:45:43:54:65:73:74:65:72
DEBUG: [ 3408] << requesting power status of 'TV' (0)
TRAFFIC: [ 3408] << 10:8f
WARNING: [ 3777] unhandled response received: opcode=8f initiator=1 destination=0 response=0
DEBUG: [ 4469] expected response not received (90: report power status)
TRAFFIC: [ 4469] << 10:8f
waiting for input
DEBUG: [ 5530] expected response not received (90: report power status)
WARNING: [ 7838] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 8900] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 12961] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 14022] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 18084] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 19145] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 23206] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 24267] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 28329] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 29390] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 33451] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 34512] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 38573] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 39634] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 43696] unhandled response received: opcode=8f initiator=1 destination=0 response=0
^Csignal caught: 2 - exiting
DEBUG: [ 44406] unregistering all CEC clients
NOTICE: [ 44406] unregistering client: libCEC version = 4.0.4, client version = 4.0.4, firmware version = 1, logical address(es) = Recorder 1 (1) , physical address: 3.0.0.0, git revision: heads/masterv4, compiled on Do 15. Aug 21:09:58 UTC 2019 by manfred@kmcubie.kmhome.com on Linux 4.9.106+ (armv7l), features: P8_USB, DRM, P8_detect, 'RPi'
DEBUG: [ 44407] Recorder 1 (1): power status changed from 'on' to 'unknown'
DEBUG: [ 44407] Recorder 1 (1): vendor = Unknown (000000)
DEBUG: [ 44407] Recorder 1 (1): CEC version unknown
DEBUG: [ 44407] Recorder 1 (1): osd name set to 'Recorder 1'
DEBUG: [ 44407] Recorder 1 (1): device status changed into 'unknown'
DEBUG: [ 44407] unregistering all CEC clients
WARNING: [ 44757] unhandled response received: opcode=8f initiator=1 destination=0 response=0
DEBUG: [ 45205] UnregisterLogicalAddress - releasing previous logical address
DEBUG: [ 45206] logical address changed to Broadcast (f)

Another thing, I had a look in /etc/lirc config files and I got the following:

Terminal

xbian@xbian ~ $ ls -al /etc/lirc/remotes/
total 80
drwxr-xr-x 1 root root 226 Dec 20 2019 .
drwxr-xr-x 1 root root 98 Dec 20 2019 ..
-rw-r--r-- 1 root root 743 Sep 12 2014 apple-a1156.conf
-rw-r--r-- 1 root root 34757 Apr 12 2013 devinput.conf
-rw-r--r-- 1 root root 1741 Oct 10 2014 mceusb.conf
-rw-r--r-- 1 root root 1913 Apr 12 2013 smt1000t.conf
-rw-r--r-- 1 root root 15702 Apr 12 2013 speedlink.xml
-rw-r--r-- 1 root root 2222 Apr 12 2013 srm7500.conf
-rw-r--r-- 1 root root 1600 Apr 12 2013 tigerfly.xml
-rw-r--r-- 1 root root 2448 Apr 12 2013 x10-or32e.conf
-rw-r--r-- 1 root root 1389 Apr 12 2013 xbox.conf
xbian@xbian ~ $ cat /etc/lirc/lircd.conf
include "/etc/lirc/remotes/apple-a1156.conf"
include "/etc/lirc/remotes/devinput.conf"
include "/etc/lirc/remotes/smt1000t.conf"
include "/etc/lirc/remotes/srm7500.conf"
include "/etc/lirc/remotes/x10-or32e.conf"
include "/etc/lirc/remotes/xbox.conf"
include "/etc/lirc/remotes/mceusb.conf"
xbian@xbian ~ $

Hope this helps.