Samsung Anynet+ CEC TV Remote not working

[Nachteule]

(6th Aug, 2020 12:29 PM)havilson Wrote:  

(5th Aug, 2020 07:44 PM)Nachteule Wrote:  

(5th Aug, 2020 10:01 AM)havilson Wrote:  

(5th Aug, 2020 01:46 AM)Nachteule Wrote:  Maybe your hdmi cable, the hdmi connector or the Pi3B+ itself is broken

Ok, I'll try with another hdmi cable. Is there any way that to test if it's the RPi?

Yes, there is:

Stop Kodi and start cec-client (if it is not already installed, you have to install package cec-utils) and connect your TV-Remote with the Pi.

Ok, I couldn't done the hdmi other cable cause my other cable didn't work.

Then we can leave it at that. I've already told you where I see the possible causes of failure.
and your log shows me a lot of warnings in the communication, so don't be surprised that the remote doesn't work anymore. and by the way, CEC has nothing to do with LIRC, they are two completely different things.

Quote:Anyway I did the RPi3B+ test, and here's the result:

Terminal

xbian@xbian ~ $ sudo cec-client
[sudo] password for xbian:
No device type given. Using 'recording device'
CEC Parser created - libCEC version 4.0.4
no serial port given. trying autodetect:
path: Raspberry Pi
com port: RPI

opening a connection to the CEC adapter...
DEBUG: [ 195] Broadcast (F): osd name set to 'Broadcast'
DEBUG: [ 197] Open - vc_cec initialised
DEBUG: [ 196] logical address changed to Free use (e)
NOTICE: [ 197] connection opened
DEBUG: [ 197] processor thread started
DEBUG: [ 197] << Broadcast (F) -> TV (0): POLL
DEBUG: [ 198] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 198] << e0
DEBUG: [ 258] >> POLL sent
DEBUG: [ 258] TV (0): device status changed into 'present'
DEBUG: [ 259] << requesting vendor ID of 'TV' (0)
TRAFFIC: [ 259] << e0:8c
DEBUG: [ 1320] expected response not received (87: device vendor id)
TRAFFIC: [ 1320] << e0:8c
WARNING: [ 2276] unhandled response received: opcode=8f initiator=e destination=0 response=0
DEBUG: [ 2381] expected response not received (87: device vendor id)
NOTICE: [ 2381] registering new CEC client - v4.0.4
DEBUG: [ 2382] detecting logical address for type 'recording device'
DEBUG: [ 2382] trying logical address 'Recorder 1'
DEBUG: [ 2382] << Recorder 1 (1) -> Recorder 1 (1): POLL
TRAFFIC: [ 2382] << 11
TRAFFIC: [ 2652] << 11
DEBUG: [ 2923] >> POLL not sent
DEBUG: [ 2923] using logical address 'Recorder 1'
DEBUG: [ 2923] Recorder 1 (1): device status changed into 'handled by libCEC'
DEBUG: [ 2923] Recorder 1 (1): power status changed from 'unknown' to 'on'
DEBUG: [ 2923] Recorder 1 (1): vendor = Pulse Eight (001582)
DEBUG: [ 2923] Recorder 1 (1): CEC version 1.4
DEBUG: [ 2923] AllocateLogicalAddresses - device '0', type 'recording device', LA '1'
DEBUG: [ 2925] logical address changed to Recorder 1 (1)
DEBUG: [ 2925] Recorder 1 (1): osd name set to 'CECTester'
DEBUG: [ 2925] Recorder 1 (1): menu language set to 'eng'
DEBUG: [ 2925] GetPhysicalAddress - physical address = 3000
DEBUG: [ 2925] AutodetectPhysicalAddress - autodetected physical address '3000'
DEBUG: [ 2925] Recorder 1 (1): physical address changed from ffff to 3000
DEBUG: [ 2925] << Recorder 1 (1) -> broadcast (F): physical address 3000
TRAFFIC: [ 2925] << 1f:84:30:00:01
NOTICE: [ 3076] CEC client registered: libCEC version = 4.0.4, client version = 4.0.4, firmware version = 1, logical address(es) = Recorder 1 (1) , physical address: 3.0.0.0, git revision: heads/masterv4, compiled on Do 15. Aug 21:09:58 UTC 2019 by manfred@kmcubie.kmhome.com on Linux 4.9.106+ (armv7l), features: P8_USB, DRM, P8_detect, 'RPi'
DEBUG: [ 3077] << Recorder 1 (1) -> TV (0): OSD name 'CECTester'
TRAFFIC: [ 3077] << 10:47:43:45:43:54:65:73:74:65:72
DEBUG: [ 3408] << requesting power status of 'TV' (0)
TRAFFIC: [ 3408] << 10:8f
WARNING: [ 3777] unhandled response received: opcode=8f initiator=1 destination=0 response=0
DEBUG: [ 4469] expected response not received (90: report power status)
TRAFFIC: [ 4469] << 10:8f
waiting for input
DEBUG: [ 5530] expected response not received (90: report power status)
WARNING: [ 7838] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 8900] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 12961] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 14022] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 18084] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 19145] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 23206] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 24267] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 28329] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 29390] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 33451] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 34512] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 38573] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 39634] unhandled response received: opcode=8f initiator=1 destination=0 response=0
WARNING: [ 43696] unhandled response received: opcode=8f initiator=1 destination=0 response=0
^Csignal caught: 2 - exiting
DEBUG: [ 44406] unregistering all CEC clients
NOTICE: [ 44406] unregistering client: libCEC version = 4.0.4, client version = 4.0.4, firmware version = 1, logical address(es) = Recorder 1 (1) , physical address: 3.0.0.0, git revision: heads/masterv4, compiled on Do 15. Aug 21:09:58 UTC 2019 by manfred@kmcubie.kmhome.com on Linux 4.9.106+ (armv7l), features: P8_USB, DRM, P8_detect, 'RPi'
DEBUG: [ 44407] Recorder 1 (1): power status changed from 'on' to 'unknown'
DEBUG: [ 44407] Recorder 1 (1): vendor = Unknown (000000)
DEBUG: [ 44407] Recorder 1 (1): CEC version unknown
DEBUG: [ 44407] Recorder 1 (1): osd name set to 'Recorder 1'
DEBUG: [ 44407] Recorder 1 (1): device status changed into 'unknown'
DEBUG: [ 44407] unregistering all CEC clients
WARNING: [ 44757] unhandled response received: opcode=8f initiator=1 destination=0 response=0
DEBUG: [ 45205] UnregisterLogicalAddress - releasing previous logical address
DEBUG: [ 45206] logical address changed to Broadcast (f)

Another thing, I had a look in /etc/lirc config files and I got the following:

Terminal

xbian@xbian ~ $ ls -al /etc/lirc/remotes/
total 80
drwxr-xr-x 1 root root 226 Dec 20 2019 .
drwxr-xr-x 1 root root 98 Dec 20 2019 ..
-rw-r--r-- 1 root root 743 Sep 12 2014 apple-a1156.conf
-rw-r--r-- 1 root root 34757 Apr 12 2013 devinput.conf
-rw-r--r-- 1 root root 1741 Oct 10 2014 mceusb.conf
-rw-r--r-- 1 root root 1913 Apr 12 2013 smt1000t.conf
-rw-r--r-- 1 root root 15702 Apr 12 2013 speedlink.xml
-rw-r--r-- 1 root root 2222 Apr 12 2013 srm7500.conf
-rw-r--r-- 1 root root 1600 Apr 12 2013 tigerfly.xml
-rw-r--r-- 1 root root 2448 Apr 12 2013 x10-or32e.conf
-rw-r--r-- 1 root root 1389 Apr 12 2013 xbox.conf
xbian@xbian ~ $ cat /etc/lirc/lircd.conf
include "/etc/lirc/remotes/apple-a1156.conf"
include "/etc/lirc/remotes/devinput.conf"
include "/etc/lirc/remotes/smt1000t.conf"
include "/etc/lirc/remotes/srm7500.conf"
include "/etc/lirc/remotes/x10-or32e.conf"
include "/etc/lirc/remotes/xbox.conf"
include "/etc/lirc/remotes/mceusb.conf"
xbian@xbian ~ $

Hope this helps.

Have you tried another hdmi port yet?