X10 Remote

[FauserneEist]

lircd.conf

Code:

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.4a(atilibusb) on Mon Apr  6 08:53:57 2009
#
# contributed by
#
# brand: PC-Funkfernbedienung X10
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  x10
  bits           16
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   8
  pre_data       0x14
  post_data_bits  16
  post_data      0x0
  gap          139990
  min_repeat      2
#  toggle_bit_mask 0x80800000

      begin codes
          livetv                   0xF11C
          rectv                    0x6D98
          photo                    0xDA05
          music                    0x5B86
          dvdmenu                  0xD904
          video                    0x82AD
          audio                    0x0732
          angle                    0x89B4
          title                    0x0A35
          subtitle                 0x88B3
          up                       0x4D78
          down                     0xC5F0
          left                     0xF21D
          right                    0x749F
          ok                       0xF31E
          1                        0x628D
          2                        0xE30E
          3                        0x648F
          4                        0xE510
          5                        0x6691
          6                        0xE712
          7                        0x6893
          8                        0xE914
          9                        0x6A95
          0                        0xEC17
          asterisk                 0x8CB7
          hash                     0x0D38
          world                    0x709B
          rewind                   0xF924
          play                     0x7AA5
          forward                  0xFB26
          pause                    0x7EA9
          previous                 0xF621
          next                     0x78A3
          stop                     0xFD28
          record                   0x7CA7
          off                      0xD702
          guide                    0x86B1
          text                     0xEB16
          volume+                  0x5E89
          volume-                  0xDD08
          mute                     0x5580
          program+                 0xE00B
          program-                 0x618C
          back                     0xF520
          info                     0x84AF

      end codes

end remote

I don't have access to the hardware.conf right now, but essentially all I changed was the driver section from default to atilibusb.