[SOLVED] LIRC TSO4838 skips step

[matej9o]

Hi !

I have a sort of the same problem as mightymike82, but after restarting I'm again getting duple movement with remote. I have tsop 38438 soldered to 3.3V.

Here is my remote.conf :

Terminal

begin remote

name Gigabyte_Remote
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100

header 9043 4450
one 611 1638
zero 611 513
ptrail 609
repeat 9041 2200
pre_data_bits 16
pre_data 0xE896
gap 107966
toggle_bit_mask 0x0

begin codes
KEY_UP 0x22DD
KEY_DOWN 0xB847
KEY_RIGHT 0x12ED
KEY_LEFT 0x38C7
KEY_MUTE 0x48B7
KEY_OK 0x3AC5
KEY_BACK 0x50AF
KEY_INFO 0x2AD5
KEY_TITLE 0x20DF
KEY_PAUSE 0x9867
KEY_PLAY 0xD827
KEY_STOP 0x9A65
KEY_VOLUMEUP 0x926D
KEY_VOLUMEDOWN 0xC23D
KEY_HOME 0x1AE5
KEY_1 0xC837
KEY_2 0x08F7
KEY_3 0x8877
KEY_4 0xF00F
KEY_5 0x30CF
KEY_6 0xB04F
KEY_7 0xD02F
KEY_8 0x10EF
KEY_9 0x906F
KEY_0 0xF20D
end codes

end remote

and lircmap.xml

Terminal

<lircmap>
<remote device="Gigabyte_Remote">
<left>KEY_LEFT</left>
<right>KEY_RIGHT</right>
<up>KEY_UP</up>
<down>KEY_DOWN</down>
<select>KEY_OK</select>
<start>KEY_HOME</start>
<back>KEY_BACK</back>
<record>KEY_RECORD</record>
<play>KEY_PLAY</play>
<pause>KEY_PAUSE</pause>
<stop>KEY_STOP</stop>
<forward>KEY_FORWARD</forward>
<reverse>KEY_REWIND</reverse>
<volumeplus>KEY_VOLUMEUP</volumeplus>
<volumeminus>KEY_VOLUMEDOWN</volumeminus>
<mute>KEY_MUTE</mute>
<power>KEY_POWER</power>
<one>KEY_1</one>
<two>KEY_2</two>
<three>KEY_3</three>
<four>KEY_4</four>
<five>KEY_5</five>
<six>KEY_6</six>
<seven>KEY_7</seven>
<eight>KEY_8</eight>
<nine>KEY_9</nine>
<zero>KEY_0</zero>
<enter>KEY_ENTER</enter>
</remote>
</lircmap>

irw:

Terminal

00000000e8963ac5 00 KEY_OK Gigabyte_Remote
00000000e8963ac5 01 KEY_OK Gigabyte_Remote
00000000e89612ed 00 KEY_RIGHT Gigabyte_Remote
00000000e89612ed 01 KEY_RIGHT Gigabyte_Remote
00000000e89638c7 00 KEY_LEFT Gigabyte_Remote
00000000e89638c7 01 KEY_LEFT Gigabyte_Remote
00000000e896b847 00 KEY_DOWN Gigabyte_Remote
00000000e896b847 01 KEY_DOWN Gigabyte_Remote
00000000e89622dd 00 KEY_UP Gigabyte_Remote
00000000e89622dd 01 KEY_UP Gigabyte_Remote
00000000e8962ad5 00 KEY_INFO Gigabyte_Remote
00000000e8962ad5 01 KEY_INFO Gigabyte_Remote
00000000e89648b7 00 KEY_MUTE Gigabyte_Remote
00000000e89648b7 01 KEY_MUTE Gigabyte_Remote
00000000e89650af 00 KEY_BACK Gigabyte_Remote
00000000e89650af 01 KEY_BACK Gigabyte_Remote

Also I tried with different remote and different tsop IR and always I have the same problem.