Howto configure support for X10 remote model OR32E

[casadoi]

I'd like to share what I did to configure X10 remote model OR32E in XBIAN 1.0a5, in case it helps anyone or just for improving xbian next versions.

Create /etc/modprobe.d with the following blacklisted modules:

Code:

blacklist rc_medion_x10_or2x
blacklist ati_remote
blacklist rc_core

Create /etc/lirc/hardware/custom.conf with the following content:

Code:

# /etc/lirc/hardware/custom.conf
#
# Arguments which will be used when launching lircd
#LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Don't start irexec, even if a good config file seems to exist.
#START_IREXEC=false

#Try to load appropriate kernel modules
#LOAD_MODULES=false

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER="atilibusb"
# usually /dev/lirc0 is the correct setting for systems using udev
DEVICE="/dev/lirc"
#MODULES=""

# Default configuration files for your hardware if any
#LIRCD_CONF=""
#LIRCMD_CONF=""

Change /etc/lirc/lircd.conf to:

Code:

begin remote

  name          X10-OR32E
  bits           16
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   8
  pre_data       0x14
  post_data_bits  16
  post_data      0x0
  gap          139984
  min_repeat      2
  toggle_bit_mask 0x80800000

      begin codes
          KEY_POWER                0xD702
          KEY_RED                  0x0732
          KEY_YELLOW               0x89B4
          KEY_GREEN                0x0833
          KEY_TEXT                 0x6B96
          KEY_BLUE                 0x0A35
          KEY_BACK                 0x75A0
          KEY_INFO                 0x042F
          KEY_UP                   0x6F9A
          KEY_LEFT                 0xF21D
          KEY_OK                   0x739E
          KEY_RIGHT                0xF41F
          KEY_DOWN                 0x77A2
          KEY_TIMESHIFTING         0xED18
          KEY_EPG                  0x86B1
          KEY_DVDMENU              0xD904
          KEY_LIVETV               0x719C
          KEY_VOLUMEUP             0xDE09
          KEY_WINDOWS              0x709B
          KEY_CHANNELUP            0xE00B
          KEY_VOLUMEDOWN           0x5D88
          KEY_CHANNELDOWN          0xE10C
          KEY_MUTE                 0x5580
          KEY_PREVIOUS             0xF621
          KEY_NEXT                 0x78A3
          KEY_REWIND               0xF924
          KEY_PLAY                 0x7AA5
          KEY_FASTFORWARD          0xFB26
          KEY_RECORD               0x7CA7
          KEY_STOP                 0xFD28
          KEY_PAUSE                0x7EA9
          KEY_1                    0xE20D
          KEY_2                    0x638E
          KEY_3                    0x648F
          KEY_4                    0xE510
          KEY_5                    0x6691
          KEY_6                    0xE712
          KEY_7                    0x6893
          KEY_8                    0xE914
          KEY_9                    0x6A95
          KEY_*                    0x0C37
          KEY_0                    0x6C97
          KEY_#                    0x0D38
          KEY_CLEAR                0x85B0
          KEY_ENTER                0x0B36
      end codes

end remote

Create /home/xbian/.xbmc/userdata/Lircmap.xml with the following content:

Code:

<!-- This file contains the mapping of LIRC keys to XBMC keys used in Keymap.xml  -->

<lircmap>
        <remote device="X10-OR32E">
                <pause>KEY_PAUSE</pause>
                <stop>KEY_STOP</stop>
                <forward>KEY_FASTFORWARD</forward>
                <reverse>KEY_REWIND</reverse>
                <left>KEY_LEFT</left>
                <right>KEY_RIGHT</right>
                <up>KEY_UP</up>
                <down>KEY_DOWN</down>
                <select>KEY_OK</select>
                <pageplus>KEY_CHANNELUP</pageplus>
                <pageminus>KEY_CHANNELDOWN</pageminus>
                <back>KEY_BACK</back>
                <menu>KEY_WINDOWS</menu>
                <title>KEY_INFO</title>
                <info>KEY_TIMESHIFTING</info>
                <skipplus>KEY_NEXT</skipplus>
                <skipminus>KEY_PREVIOUS</skipminus>
                <display></display>
                <start>KEY_PLAY</start>
                <record>KEY_RECORD</record>
                <volumeplus>KEY_VOLUMEUP</volumeplus>
                <volumeminus>KEY_VOLUMEDOWN</volumeminus>
                <mute>KEY_MUTE</mute>
                <myvideo>KEY_GREEN</myvideo>
                <mymusic>KEY_RED</mymusic>
                <mypictures>KEY_YELLOW</mypictures>
                <mytv>KEY_BLUE</mytv>
                <one>KEY_ONE</one>
                <two>KEY_TWO</two>
                <three>KEY_THREE</three>
                <four>KEY_FOUR</four>
                <five>KEY_FIVE</five>
                <six>KEY_SIX</six>
                <seven>KEY_SEVEN</seven>
                <eight>KEY_EIGHT</eight>
                <nine>KEY_NINE</nine>
                <zero>KEY_ZERO</zero>
                <PlayDVD>KEY_DVDMENU</PlayDVD>
                <ShowVideoMenu>KEY_TEXT</ShowVideoMenu>
                <NextSubtitle>KEY_*</NextSubtitle>
                <AudioNextLanguage>KEY_#</AudioNextLanguage>
                <ContextMenu>KEY_ENTER</ContextMenu>
        </remote>
</lircmap>

Add the following line inside the file /home/xbian/.xbmc/userdata/advancedsettings.xml:

Code:

<remotedelay>17</remotedelay>