Problem: Lenovo USV IR Receiver
|
25th Mar, 2013, 04:34 AM
Post: #3
|
|||
|
|||
RE: Lenovo USV IR Receiver
Ok work a bit on it using that thread:
http://forum.xbmc.org/showthread.php?tid=136205 Looks like it is using mceusb modules but not in default vendor/product-id recognized by the module. If I do : Unplug IR rmmod mceusb modprobe mceusb echo 0609 0357 > /sys/bus/usb/drivers/mceusb/new_id Replug Device /etc/init.d/lirc stop mode2 I see Terminal pulse 450 space 450 pulse 450 space 400 pulse 500 space 400 pulse 900 space 450 pulse 500 space 400 pulse 450 space 450 pulse 450 space 400 pulse 550 But I soons as I reboot I need to put the new id again. And irw donT' output anyhting. But I'm near... Oh sorry I modified /etc/lirc/hardware.conf before all this, I put back the default one and irw is working now. Just need to find a way to make it work on boot. Here is the howto (as root) : 1. vi (or nano) /etc/udev/rules.d/95-mceusb.rules 2. Put Code: SUBSYSTEM=="usb", ATTR{idVendor}=="0609", ATTR{idProduct}=="0357", RUN="/etc/udev_mceusb.sh" 4. Put Code: #!/bin/sh 6. Reboot! Test with irw after reboot, you should see something like Terminal xbian@xbian ~ $ irw 000000008001006a 00 KEY_RIGHT devinput 0000000080010069 00 KEY_LEFT devinput 000000008001006c 00 KEY_DOWN devinput 0000000080010067 00 KEY_UP devinput Since this is a common IR on ebay (and really cheap, bought mine for 13$) maybe it could be added to mceusb module. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Lenovo USV IR Receiver - w1zz4 - 24th Mar, 2013, 06:43 AM
RE: Lenovo USV IR Receiver - CurlyMo - 24th Mar, 2013, 07:55 AM
RE: Lenovo USV IR Receiver - w1zz4 - 25th Mar, 2013 04:34 AM
|